Unable to print with the printer HP 080c range

Similar Questions

• Unable to communicate with the printer HP 4630

  Continue error message of "Unable to communicate with the printer." Even when connected by USB.

  Have reinstalled the software several times, checked the wireless (no problem), printed many pages of configuration directly from the printer.

  I keep trying to add the printer to my preferences. One thing is that it will only add like a scanner or fax, a PRINTER. It is also called Hello Scanner. Why can't I add as a printer?

  Now, it will not also let me COMPLETE reinstallation of the software, it freezes at the section add printer and I can't move forward. So frustrating...

  Help!

  Hi @PKahn

  It seems that the computer does not recognize the print driver.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• error: unable to communicate with the printer

  I can print a test page for the hp deskjet 3510 series: hp printer assistant application on my laptop and I can print to the printer by sending an email, so I know that it is connected to the network and I know that my laptop can be printed on it. But when I try to print from Word or any other application I get an error: unable to communicate with the printer

  Any ideas?

  Download and run this: http://support.hp.com/us-en/document/c03286146

  What did he say?

• Unable to communicate with the printer E710 6500

  I have a HP Officejet 6500 a Plus E710n-z.  He has in the past, but is no longer connects (by wireless) to my computer (Apple OSX 10.8.4).  It became intermittent in the last month, and then did not answer at all.  I had a growing list of items to be printed.

  I followed each step- http://support.hp.com/us-en/document/c02205477 .

  WiFi to each is not a problem.

  The printer has been disconnected (deleted) as the printer from the computer.  I was able to add in the part 'scanner' printer, but cannot add to the printer - it has the message "unable to communicate with the printer.

  What should I do next?

  I you sent a private message with the steps you need to perform the reset.

  Good luck
  Kyle

• HP laser jet 8150n, unable to communicate with the printer?

  I have problem with my printer, I have him connect with lan cable and the green light only works printer not at the top of the Tower, I can search and find but when it verifies something it says 'Unable to communicate with the printer' one has the solution? Thanks in advance.

  I'm sorry, but you have the wrong forum. These are the forums of consumer printers of the class, and you have business to printers in class forums business like yours. Just follow the link and you will be in the right place.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UBw16U2PVM4

• Computer is unabler to commuincate with the series of printer HP Deskjet 1050 J410

  I just install the printer, I did everything well, because he said, he is ready to use, but I get a message like

  "my computer is unable to communicate with the printer" can someone please tell me what I did wrong and how

  to solve this problem? I can make copies, but I can't print or scan

  Original title: I just install a series of printer HP Deskjet 1050 J410

  Hi Bill,

  -What do you mean "I can make copies, but I can not print, scan or?

  It could be that you have a firewall application installed on your computer that prevents communication with the printer, or perhaps you need to uninstall and reinstall the printer due to corrupt files.

  Step 1

  Initially I suggest you run utility HP Print and Scan of the link doctor and check if this solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/Forum/network_diag/&softwareitem=MP-120776-1

  Step 2

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers to communicate.

  I suggest disable you the Windows Firewall and the antivirus temporarily.

  View items-

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Step 3

  You can try to update the latest version of the printer drivers and see if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4027462

  Step 4

  Uninstall and reinstall the printer and check if it helps.

  Add or remove a printer

  (Also applies to Windows 7)

  For your reference:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Questions of UPD on 4700dn printer - unable to communicate with the printer

  Hello!

  I'm testing the UPD on my laptop which has Windows 7 64 bit on my network printers all in my building. All network printers work fine except one... Color LaserJet 4700dn.

  When you use the UPD interface when you try to print, I try to use the IP address of the printer and it cannot connect. "When you use the search for network printers option, it recognizes the printer, but when I try to connect, I get the error ' unable to communicate with the printer.

  I changed the host name of the printer, changed the IP address on this subject, I can ping the printer and print using the print server, I rebooted the printer... Even got a older laptop that has Windows 7 32-bit and used the UPD 32 bits and the same symptoms occur.

  Any ideas because I hit a brick wall.

  Thank you very much!

  Looks like you can set up a standard port and print ok from a print server.  The UPD in the stream you describe will attempt to make multiple calls SNMP to determine the abilities of the printer, and those who are failing, causing the UPD to throw the error you see.

  Take a look at the network settings in the SAP.  Specifically, under Security, management of the protocols and the SNMP tab.  Watch to see if one of these parameters differ from other devices that work, like maybe SNMP is disabled on the YOA 4700n.

• HP Officejet Pro 6830: Unable to communicate with the Scanner

  Printing is fine and just impossible to scan.

  I tried to solve the problem of scanner/copy of the measures:

  1. run a 'HP Print and Scan Doctor' to check

  2. click on 'Scan of difficulty' to identify the error

  3A through the steps with all green ticks, with the exception of the driver with a «!»

  4. with the result, I went and download the latest driver to update the scanner and also did a update system for you ensure that the printer is so far

  5. after the update I still get this message from the scanner "Unable to communicate with the Scanner" and when I press the button of scan/copy the printer only a "ding" sound occurs but nothing is scanning / copy

  Note: I brought the printer 2 months ago and this is the first time that's happened

  Hi @Flash1688,

  Welcome to the HP Forums!

  I see that you are unable to communicate with the Scanner with your HP Officejet Pro 6830 on Windows 8.1. I'm happy to help you!

  If you just try to make a copy with the printer, it works? You see on the screen of the printer error messages? Copy of Documents. Also, if you lift the lid of the scanner during the copy process, you see a light come ON and the scanner bar moving?

  In the meantime, please, try the procedure described in this guide, a message 'no computer found' for HP Officejet 6810 and HP Officejet Pro 6830 e-all-in-one printerand let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Error: "unable to communicate with the TWAIN device" with brother MFC7820N

  Original title: can I connect a scanner through a switch?

  I'm trying to analyze something like I did it many times with my brother MFC7820N hung on my tablet. But recently, I replaced a 2nd router I had in my system that failed with a new Dynex switch.

  I have my internet modem and 2 computers connected to a Linksys wireless router. I have another ethernet cable connecting the router to a new switch. I have my 2 printers attached to the switch. One is a Brother HL-2700CN color laser and the other is a brother MFC7820N mutli-function. It use PaperPort to scan stuff on him, since provided on the CD with the device.

  So today I open PaperPort and click the Scan button and it appeared an error saying unable to communicate with the TWAIN device box.

  So I clicked on a doc shown in PaperPort that I had scanned a few weeks ago and I click right and select Print and printed to this MFC7820N.

  Then I come back to click on scanner again and yet again, it appears that box. So I watch and WIA-Brother MFC-7820N LAN is displayed in the Scanner marked drop-down list box. So I switched the power of the MFC and tried again and it still appeared that same box again.

  OUCH! I'm going nuts! You have any ideas?

  Hi Jeff has Davis,
   
  Method 1: Uninstall and reinstall the driver again and check if it helps fix the problem.
   
  See this article for more information:
  How to manage devices in Windows XP
   
  Method 2: Try the suggestion given in this article:
  'Could not enable TWAIN Source' or 'He has not find scanner' Error Messages are displayed

• Unable to connect with the PC tab

  I bought a Ubislate android 7 C + from Datawind, but unable to connect with the computer

  Burnersalvation,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. what happens when you try to connect to the tab?

  3. How do you connect tab to the computer?

  To connect to Android Ubislate to the computer, it may require some software to install on the computer provided by the manufacturer of the tab. Then I suggest you to contact the manufacturer of the tab to get help on this issue.

  Check out the link:

  http://www.ubislate.com/contact/index.html

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• receiving the message "unable to communicate with the TWAIN device.

  I get the message "unable to communicate with the TWAIN device.

  Hi Kim,

  What is the brand and model of the scanner?

  For now, you can have a look at the link:

  http://nuance.custhelp.com/app/answers/detail/A_ID/3572/~/%E2%80%9Ccannot-communicate-with-TWAIN-device%E2%80%9D-error-message

  http://www.computing.NET/answers/Windows-XP/BRO-MFC240C-scanning-problem/160840.html

  http://www.hwkb.com/Uwe/Forum.aspx/scanner/615/scanner-problem-TWAIN-vs-WIA

  http://forums.techguy.org/hardware/270578-brother-mfc4800-scanner-kicking-my.html

• Unable to connect with the Mac computer?

  Unable to connect with the Mac computer?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• C4599, error-print wireless unable to "communicate" with the device?

  problem with the wireless C4599 printer

  sometimes wireless works, and sometimes it's not

  "solution center" shows that it is connected.

  When the work get status = "error - printing"

  "solution center" still shows as connected, but when trying to get information, such as ink level, get "the computer is unable to establish 2-way communications with the device.

  OK work when connect with usb.

  does not help to disable ZoneAlarm firewall.

  What are the good ' property settings, for example...

  ' 1. ' localization ', Ip etc.?

  2. "ports", including one for check or add?

  3 etc.

  could not find any help in the manual.

  Maybe there's another document that helps with that.

  any other suggestions for fixes?

  Thanks again for your help!
  AKM (XPproSP-3, 7 - IE, Office2003)

  I'm starting to suspect a problem with your firewall.  Is the firewall disabled Windows (do)?

  In addition, ZoneAlarm has some known issues with the HP printing software.  Learn how to set it up here.

  I would like to set a static IP address (or reserve, and IP address), but I don't think it's a source of your current problem.

• Unable to communicate with the printer hp deskjet 1000

  I have used this printer for almost 2 years and problem say never FAILED before... forst my text printing is distorted then he showed in offline mode and later its says printer is ready, but when I give the command of printing... it said 'cannot communicate with the printer.

  Pls help!

  My problem was solved by removing and reinstalling the drivers... .any way thanks for your help

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  

• HP 2510 "Unable to communicate with the printer" error.

  Greetings,

  I recently bought a Deskjet all-in-one of HP 2510. I'm running on Windows 7 Home Premium 64-bit.

  When I try to print documents, the printer comes with the following error:

  http://i.imgur.com/uwK8MNq.PNG

  Try to use the print and scan tool doctor, I find a conflict report of driver:

  http://i.imgur.com/B9NCkTQ.PNG

  Thus, after following the instructions, I uninstalled and reinstalled as indicated (in taking very special care to make exactly as shown in the installation instructions). Errors still occur.

  I tried to delete the printer from the Device Manager, uninstalled the drivers of the various related devices out there, uninstalled the full software features using Add/Remove...then tried reinstalling again. I even tried to foregoing the installations CD and website (Yes, I tried both) and let Windows automatically installs the drivers. Always the same two errors original.

  It sucked to the top of my Sunday together. Someone saw?

  I managed to go today to get the USB power cord and it has indeed solved my problems. It seems that the USB cord that works with older models is not compatible with this printer, so that's been my problem.

  Fortunately, the new cord works perfectly and I was able to print two pages of perfect test.

  I apologize for my frustrated shattered earlier and thank you for your help.

• Unable to connect with the MIFI device.

  I have a Verizon Jetpack 890 L mifi device and an older model Dell laptop that is wireless. After spending two hours on the phone with Verizon, finally got the correct IP address for the device to 'connect' with the computer. The States of the computer it is connected to the device, but the device shows that it of just nothing connected to it, have tested the device with a phone and the Xbox and the two front showed connected and functioning with the device. But the computer does not connect to the internet. Help, please!

  The message "the network password needs to be 40bits or 104bits depending on your network configuration. "This may be criteria such as 5 or 13 ascii characters or 10 or 26 hexadecimal characters" means that the system used encryption is WEP (instead of WPA or WPA2).  Although it is the lowest available wireless security, now that I think about it, I'm a little surprised that the mifi comes with a wireless security is enabled.

  There are at least 3 different "passwords" potentially used by your device.

  1. There may be a password that allows the device to connect to cellular service.  As far as I can tell from the manual, it is a "PIN code" that may or may not be required by your cell carrier (i.e., Verizon).  See page 15.

  2. There is a password that gets access to the configuration of the mifi utility.  This is the password that is supposed to be printed on the back of the mifi AND displayed on the LCD when the mifi is turned on.

  3. There may be a password for encryption (or "network key") wireless as the wireless mifi and your computer is configured to use WEP, WPA or WPA2.

  The more I read the manual for this device, I am convinced that the default setting for wireless encryption is 'None' and the password on the back of the device #2 above.  On the other hand, I can't imagine how he could have set himself up for the WEP encryption.

  Here are my latest suggestions.

  1 reset the mifi to factory default.  Beside the decision-making when the power cord is connected is a small button.  With the power on, press and hold this button. The manual says only: "hold."  I would like to keep the button pressed for at least 20 seconds or until there is some indication on the screen that a reset has occurred. You will need a unfolded paperclip to press the button. See http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=50011#alt

  2. make sure that the battery is fully charged.

  3. turn on and confirm that the connection ('up' and 'arrows'), (e.g., 4 G LTE) service and the strength of the signal (bars) are turned on:

  

  4 wait about 10 seconds and then go to "View available wireless networks," find the one that matches your mifi (check to make sure that you do not have a neighbor with a mifi with a similar SSID) and click on connect.  You should NOT be asked for a password.

  5. open a web browser and enter the address 192.168.1.1 OR vz.hotspot in the address box and click GO.  You should see the following text:

  

  6. Enter the password of the sticker on the back of the mifi in the box and click on the button "Login".

  From there, you can follow the manual to configure wireless security settings.  Good luck.