Unknown connection status: dependency service or group was able to start

Similar Questions

• Connection status: unknown. The dependency service or group was able to start.

  Greetings!  I have a year old Dell Inspiron.  Everything worked fine last night, but when I woke today I couldn't connect to the internet.  When I put the cursor on the network icon, it says "connection status: unknown."  The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually.  In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.

  My antivirus (Avira) software is fully up to date from last night.  I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause.  The guy there said it was a software problem.  I tried resetting TCP/IP (netsh winsock reset) without success.  I also tried sfc/scannow in safe mode and windows without success.  Are there other options?

  Thanks in advance.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• [Windows 8.1] Limited Internet access + the dependency service or group was able to start the PROBLEM.

  So I have this problem for a long time . I can connect to the internet, but it says limited. It works perfectly fine but the computer says that I am not connected.  I don't know what are the causes that. Troubleshootin g can't find any problems. Also when I go to network and sharing Center , he said:

  Unknown

  The dependency service or group was able to start.

  Thank you: D-Patrick

  Please run a check of system files (SFC) & DISM if you're on win 7 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Error message: unknown connection state. The dependency service or group was able to start.

  I installed Office 2010 on my computer with Vista and now can't connect via cable or wireless.  I get the error message: unknown connection status. The dependency service or group was able to start.  I know that the router and the wireless work.  I tried several of the mentioned patches, but nothing has worked.  My Verizon card works.

  Hello Chelen,

  I suggest you visit this Microsoft TechNet thread where they discuss the same problem you are having:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/fb551ba5-327F-4265-8764-ea201331afb4/
  This response may be useful:
  "I also had the same problem and the solution above does not work.

  My problem was caused by corruption in the TCP/IP stack

  To fix, you need to run a command as administrator prompt

  Start > all programs > Accessories > prompt (right click and run as administrator)

  At the command prompt, type: netsh winsock reset

  "Ignore all errors, restart and voila'.

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• "dependency service or group was able to start.

  I have a laptop with vista. my wireless connection is explained by limited access internet and the icon in the launch area shows "dependency service or group was able to start.  I have internet, so I don't know what that means.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-the-dependency-service-or-group-failed/2f8fb4c8-26f1-48E0-BC7F-7b0fa631fd26

  It will be useful.

• install problem - c:\users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

  I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

  I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

  c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
  The dependency service or group could not start

  Any ideas?

  You may need to temporarily disable your security software (antivirus).

• The dependency service or group was able to start. DHCP client service.

  My computer will basically not connect internet by cable or wireless. Network adapters seem to have gone haywire. Ive done several system restores and even a sfc has to analyze in the command prompt. He said "Windows resource protection found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. "Journal >" etc.
  It would seem that I corrupted with Vista. If I restore these files or what I have to do my second recovery system? Any help would be appreciated.
  Thank you.

  Hello

  ALU is ASUS Live Update, so you should check with the manufacturer ASUS and system and/or generator as you have
  in fact to be material errors.

  ------------------------------------------

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
   
  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When you try to share my internet wireless connection I get this errordependency service or group was able to start

  When I try to share my internet connection, I get the following error. dependency service or group was able to start

  Hi Jason,

  1. What is the brand and model of the computer network adapter?

  2. How did you try to share the internet connection?

  Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest you make sure that the slot addiction services are enabled.

  a. Click Start, select run, type services.msc and click OK.

  b. to activate a service, look for it in the right pane, double-click its entry.

  c. do not forget its Startup Type is set to automatic, and then click OK.

  All the following services must be so configured to use ICS:

  Application Layer Gateway Service
  Network connections
  Knowledge of the network (NLA) locations
  Plug-And-Play
  Remote Access Auto Connection Manager
  Remote Access Connection Manager
  Remote procedure call (RPC)
  Telephony

  After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Error 1068: Unknown connection status: the service dependency or groups could start

  Hi all

  I ave a problem with Vista service pack 2 running on Sony viao with the network. I have access to the internet, but my connection icon has a red X on it with the message "unknown connection status: the dependency service or group could not start". I did my homework to browse all the threads and have performed all of THE following conditions, but the problem persists.

  1. in the course of execution sys check through sfc/scannow

  2. reset TCP/IP through 1. netsh winsock reset 2. netsh int ip reset

  3. verification of all services such as the services in the list of networks and knowledge of network locations.

  However the problem persists. I cannot forget to mention that the list of Network Services and network location awareness not start I get the same error when I try to start them. I checked all the services above is dependent on and they are started and set to automatic.

  Is there anything else I can do to solve this problem other than the system of recovery or reinstallation? I have some stuff on my laptop that even if I save them I have given will be lost. for example the accounting software with its data, software for which I don't have the disk to re - install and the data in them cannot be saved on a server running. To make the story short, I really want to avoid recovery on the option of resettlement

  As I said, I have access to the internet, but the mere fact that this problem is there, its that bothers me and I don't want to run bigger problems later

  Any help would be greatly appreciated

  Thanks in advance

  Hi IMOMDS,

  1. don't you make changes before the show?
  2. have you checked if the network connections and support TCP/IP NetBIOS services are started?

  Try these steps and check the result.
  Step 1: Virus scanner online
  a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
  b. click Full Service scan and complete the scan.
  c. check the difference.

  Note: Use your favorite security software to search for viruses or malware on the computer and remove it.

  Step 2: If the problem persists, restore the computer to an earlier time when it was working fine
  a. see what is system restore?
  b. Once you have restored the computer, check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to connect to the ESSBASE server &amp; opmn was able to start

  Dear all,

  I couldn't connect to Essbase server and a service to opmn works not as well. Hard at this issue not accessible planning application, kindly help us this is very urgent and very crucial for us.

  Here are the controls and exit (Please find logs attached):

  The message is EASconsole below:

  ========================

  Error: 103: unexpected error Essbase 1030818

  Error: 1042006: error network [10061]: unable to connect to [XXXXXXXXXX.

  1. DS.
  2. XXXXXXXXXX.

  [local: 1423]

  Error: 1030818: failed to connect. Please check if the server and port are correct. If you receive timeout or handshake failure, please check if you have tried to connect to secure the port without keyword secure or disable the port with the secure key word.

  Of MAXL:

  ========

  Essbase MaxL Shell 64 bit - version 11.1.2 (ESB11.1.2.4.000B193)

  Copyright (c) 2000, 2015, Oracle and/or its affiliates.

  All rights reserved.

  MAXL > connection;

  Enter the user name > admin

  Enter the password > *.

  Enter the host > XXXXXXXXXX

  ""

  ERROR - 103 - Essbase unexpected error 1030818.

  Error - 1042006 - network [10061]: unable to connect to [XXXXXXXXXX.d

  1. s.XXXXXXXXXX.local:1423].

  ERROR - 1030818 - login failed. Please check if the server and port are correct.

  If you receive timeout or handshake failure, please check if you have tried a bitch

  CT to secure without keyword secure or clear with the keyword secure port...

  MAXL >

  Cmd prompt try everything to start opmn below is the message:

  ======================================

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\hyptstadmingdc > cd C:\Oracle\Middleware\user_projects\epmsystem1\bin

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl status

  opmnctl status: opmn is not running.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl startall

  opmnctl startall: from opmn and managed all process...

  opmnctl startall: opmn was able to start.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin >

  

  Hi all

  Problem was solved after reinstall & reconfig (without uninstalling) box-2, after that I could use planning an application as usual without error.

  Kind regards

• The computer browser Service 1068 error - dependence or the Group was able to start

  I hope you can solve a problem that I'm trying to solve for 2 weeks or more.

  My small house nat network - XP Home - was working fine then I found I could no longer see / access files remotely on my network. The other PC can see and access my shared files and the other pc, I can ping and Internet access is ok. 

  Inspection services do not start: - computer browser, desktop and Netlogon - any attempt to boot from the Administrative Tools / Services results an error 1068 - dependence or the group does not.

  I ran the network set up wizard, and I tried to reinstall the network adapter and the drivers but no change. I checked the Web sites and sought suggestions; I checked the registry and dll for as suggested in the articles, but have found nothing.

  Any suggestions would be welcome and thank you for your time.

  Kind regards

  Bob D UK

  You must start the dependent services. Dependent services are workstation and server. I think that you start the workstation service.

• Windows could not start error 1068: dependency or group was able to start the automatic configuration of WLAN set the local computer.

  I am not able to start some services to get connected wireless.  In Device Manager the poster adapter works correctly.  The WIFI light is on.  Start Windows Wireless Service bar lights up, but the service does not just start.  I have run chkdsk and several other parts but registry cleaners I keep coming up empty.  Help, please.

  I've been sarching for hours and hours... and it's already after hours of working offline with the client in their home... no restoration of the system or the backups... typical noob... but not their fault it happened... I did EVERYTHING suggested. Nothing has worked... Almost abandoned and prepared for a re - install... then I found it at the last second...

  «OMG 911techmedics...» You're crazy GENIUS!

  Finally, something works and does not require a complete reinstall of the OS. I was so scared of it because Asus does not save a physical copy of the Recovery Manager on the hard drive, and somehow my backup discs (6 disks, waste of my DVD: O) don't work at all after spending an hour by burning.

  What happened was I used RegTweaker to do a cleaning of registry on my Win7, my computer worked faster, but I lost my WLan service and no matter what I was doing nothing worked, until I stumbled upon your post! I have read more than 50 pages of Web/forum sites and tried probably suggested and none of them worked.

  I tried:

  (1) Microsoft Winsock32 Fix
  (2) replacing Winsock dll
  (3) Yes Netsh wlan with the set command
  (4) order of Netsh reset catalog
  (5) LSP Fix.exe
  (6) right click 'Manage' on computer and everything related to the WLAN + dependencies on "automatic".

  I spent 8 hours and none of the above worked. Apparently a lot of people have the same problem after using a registry cleaner. He has tried, tested and proven. I did the registry cleaning on 2 computers and next thing I know on reboot, it is that the WLAN Service went AWOL. My first suspicion is gone to a missing or corrupted Winsock, but I never thought that a simple change of 2 files in the registry would solve the problem. Your piece of text was scary to look at in the beginning, but I was so desperate that I was willing to try anything and it really paid off. Microsoft should pay you the man! Their stupid suggestions do not work. For those who like me, I break down the instructions for you:

  Step 1: Click the button START
  Step 2: In the search box, type "regedt32" (of course, do not include the ""), right-click on the result of the research and the "Run as Administrator".

  Step 3: Click 'HKEY_LOCAL_MACHINE', should extend out to a list of things
  Step 4: Next, choose 'SYSTEM', is expected to increase again
  Step 5: Choose "CurrentControlSet", develops again
  Step 6: Select 'Services', develops into a great big list of things

  Step 7: Click on "Dhcp", the right window shows the files in this folder
  Step 8: Double click on "DependOnService".
  Step 9: Remove all the words in the text, except "Afd" box, and then click OK. You are done here

  Step 10: Then under 'Services', are looking for "EapHost", this should be a few records below Dhcp step 11: same thing, double-click on the file "DependOnService".
  Step 12: Delete everything in the text are and click OK. You are finished.

  Now close everything and RESTART WINDOWS. Your WLan should be back and work once at startup of your computer. Hope that makes you win like he saved me. Thanks to an original poster for the wonderful of the resolution. Your message has been almost too obscure to find, but I'm glad that this has been RESOLVED! I will be passing the word around to save people from the constant agony of WLAN SVC goes ballistic every time after a cleaning the registry. »

  Now then... I was about to wipe the machine flowering in any case, I thought ' what the *', and just did the 12 steps without even a reg backup... AND THIS DO FEAR WORKED!

  911techmedics saved our skins...

  Thank you!!!

  The Lady Sharrow...

• I used administrative services to change my share on automatic. I have applied these changes and click Start. I had a dependency service 1068 error message or group was able to start.

  I use Bell Fibe 25

  My computor is running on the windows xp proffesional 64

  Also don't see xbox 360 image in the area of media sharing in windows media player

  ????

  Hi DougGowers,

  Follow the suggestions below for a possible solution:

  Method 1:  When the "Error 1068" error is logged, view the dependencies for administrative services tab to ensure that the services that rely on administrative services are not stopped. To view the Dependencies tab, follow these steps:

  a. click Start, click run, type services.mscand click OK.

  b. right-click on administrative service you wish to view and then click Properties.

  c. click the dependencies tab.

  If the service that depends on the Administrative function is stopped, right-click the service in the Services console, and then click Start. Then, try again changing administrative service.

  Method 2:  Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  You can also see the following articles for more information on sharing media with Windows Media Player:

  Share your multimedia files

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media

   

  Listen to music from your computer to Xbox 360

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/stream-Xbox

  Let us know if that helps.