unknown device message in Device Manager

Similar Questions

• P 8470 & HP HP 8440 P: upgrading to W10 Pro 64 bit / device Reporting - unknown device manager

  I have recently upgraded to Windows Pro 64-bit 10.  Machines involved are - 8440p & 8470p running W7 Pro 64-bit.

  The Device Manager shows an unknown device - ACPI\HPQ6000\3 & 33FD14CA & 0.

  Could someone tell me what this is in reference to.  Perhaps point to a driver that I could update.

  Thank you / / Jeff

  You are the very welcome.

  The reason why you don't see the driver is because most of the drivers are missing in support pages, which have not worked directly for HP split into 2 companies from 1 August.

  This is certainly the driver you need.  If the version of W7 works, I can't say.

  See if it works.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

  If this driver does the same thing...

  Go to Device Manager and click on the unknown device of 6000 who need pilots.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option, then at the bottom of this window, let pick me from a list of drivers for devices on my computer.

  Click on disk and go to C:\SWSetup\sp59282\accelerometer and select the HP Mobile Data Protection sensor and see if the pilot goes like this.

  Here's a partial copy and paste of the accelerometer installation information file.

  As you can see the device is supported by the driver.

  But it's the most recent driver is there, I know.

  [Manufacturer]
  Mfg % = HP, ntamd64

  [HP.ntamd64]
  DeviceDesc % = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ6000

• Portege M200 - device unknown in Device Manager

  I did a clean install of Windows XP on my toshiba portege m200 (Tablet). I have most of the devices drivers installed, but there is one that I can't understand. The device manager says I have an "unknown device" on my "Intel 82801 dbm lpc interface controller.

  What is it? I thought it was the chip set, but I had installed the Intel chipset drivers (twice, just to make sure that I really did), but it still reads as 'unknown device' on ' Intel (r) 82801DBM LPC Interface Controller - 24CC.

  To resolve this issue go to the device, right click on the unknown device, Manager and then select set to update driver.
  When the Hardware Update Wizard appears, select the advanced option.
  From the next window, select the 'don't search. I will choose the driver' option
  Now, go to the Intel announcement and select good "82801DBM LPC Interface Controller - 24CC.
  Click OK and now it should work.

  Also, be sure you have all the drivers installed from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Re: Satellite 5200 701: unknown device in Device Manager.

  Hello.

  It WinXP Pro + SP 3.
  In the display devices, such as an unknown device manager. Try all of the pilots, who were on a disc with the laptop, nothing helps. Give the solution!

  I still use Windows XP Home with Service Pack 2 and I'm really happy with it. If you have some problems with SP3 remove and continue to use Windows XP Home with Service Pack 2 only. Satellite 5200 is quite old but very nice laptop. Make sure that the laptop works fine with SP2 and you have an application of good-antivir.

  Simply to operate Satellite 5200. I noticed that many people have reported on various issues after installing SP3. Exactly the same thing with Vista SP1.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite L650-1NC - Map disappeared WLAN Device Manager

  Hi guys!

  I bought the Satellite L650-1NC. After installing the system, everything is ok, but no wireless card. I downloaded the latest drivers from Toshiba and manufacturer sites. After you have installed the latest drivers for the wireless card disappeared from the Device Manager! Connection via cable, works without problem. Exhausted all ideas. Help, please.
  Operating system: Windows 7 64-bit
  Wireless card: Realtek Wireless LAN adapter 8191SE/8192SE

  PS. Sorry for my English

  Hey,.

  The WLAN card is listed in the device as unknown device manager or it is completely gone?

  It's probably happened due bad installation driver in your case, I recommend removing all WLAN drivers and run CCleaner tool to clean the registry. Then download & install the latest official Portal WLAN WLAN drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Also, make sure that the wireless network adapter is enabled. This can be done with the FN + F8 key combination.

• I get message "USB device not recognized", but two USB devices are actually works very well. Poster sometimes Device Manager 'unknown device', then it will disappear and reappear.

  Poster sometimes Device Manager 'unknown device', then it will disappear and reappear with the error message.  Sometimes, I see the message even when there is nothing in the USB port.

  Hi malsnano,

  I see that usb devices do not work on xp. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the issue limited to these usb devices?

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  M odes 2:

  Put the computer in a clean boot state, then check if that helps.

  How to solve the problem by performing a clean boot state:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in step 3: to reset the computer as usual.

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 4.

  You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart the computer and Windows XP will automatically reinstall all USB controllers.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Vista on Satellite A100 - peripheral unknown listed in Device Manager

  Hallo,

  I installed Vista on my Satellite A100-771. I also installed all the drivers downloaded from the Support from Toshiba site.
  But when they come out still - starting to Vista, a new hardware based message. I don't really know what material it is.

  There is an unknown device in Device Manager, and windows cannot find the driver for this device online.

  Can someone help me?
  Thank you very much!

  Hello

  may I ask what you´ve drivers downloaded? And about the new hardware based: did you check your device for the Device Manager?
  What is standing there as the device is not installed? Mass or multimedia storage? Please be more specific with your explanation and Don t forget the drivers in the list.

  THX

• Re: Equium L20-198 - in Device Manager unknown devices

  Hello
  I have a PSL2ZE Equium L20-198.

  I have trouble with the drivers provided by this site everytime I try to install the driver it stops telling me that the chipset is not supported by the program, so I have these unknown devices left to solve

  Ethernet controller
  modem PCI
  SM bs controller
  controller of SB
  VGA controller

  And even if it is a wireless switch (and it works IE turns the light on). I have no software or the details of the installed wireless (standard) whatever it is!
  Not there at - it no utility driver like all the drivers in one of toshiba!

  Thanks to anyone who repiles in advance as this is driving me crazy!

  Hello

  Do you have what OS installed on your Equium L20?

  Normally, you can download all the drivers on the Toshiba site. Did you check that?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I had a similar error message if I tried to install a new driver from chipset, but it worked if I installed the driver in the Device Manager with the Advanced installation order.

• Device Manager - unknown device + Hig Defintion Audio Device (Point of Exclamation)

  Hello

  I hope that someone can help you. The hard drive on my laptop of HP ENVY TS 15 (product number: E3S19UA #ABA) out crapped and I reinstalled Windows Enterprise 8.1. I downloaded and installed all the drivers from the HP website. When I look at the Panel, I have an "unknown device" and in the audio, video and game controllers, I have an exclamation mark next to the high definition Audio Device.

  I installed the HP Support Assistant and let it do its thing. That has not fixed the problem. When I look at the properties for the unknown device, I see the following in detail: "ACPI\HPQ6007\3 & 11583659 & 0" regarding high definition Audio, I see the following in the general tab:

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  When I try to update the driver software fo the High Definition Audio, I get a message that "Windows has determined the software driver for your device is up to date.

  Don't know where to go from here. Any help or words of wisdom would be greatly appreciated.

  Thank you

  -Val

  You are the very welcome.

  This is defininitely the driver you need and you need to install it manually.

  Run the driver again.

  Go to Device Manager and click on the unknown device needing driver.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software, and find the folder of the driver that was created when you ran the driver.

  This file will be located in C:\SWSetup\sp66078.  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If this does not work, then back to her browse my computer for driver software window and then select Let me pick from a list of drivers for devices on my computer option, then select Have Disk and browse to: C:\SWSetup\sp66078\InstallFiles\Win8_1\accelerometer and select the HP Mobile Data Protection sensor from the list and see if the pilot goes like this.

  The HD audio device is the audio device Intel HDMI which could not install when you ran the graphics driver, so run it again and if it does not install, manually install the driver using the same procedure that I posted to the 3D driveguard.

  If it doesn't, then I remove the driver and tell you where to get the driver from, as I did for the above device.

• CanoScan 5600F Scanner appears as unknown in Device Manager

  I have a new CanoScan 5600F scanner which appears as unknown in Device Manager. I downloaded and installed the latest driver (several times) from Canon.

  • I tried the scanner on two PC running XP Home - a new Compaq Presario and a new Barebone VisonMan. It does not work on either.
  • I also tried the Epson scanners on both machines, and they don't work either.
  • However, when I run the Compaq Presario with Vista (which came with it), works to scan Canon. Problem is, I don't use Vista (or Win7) and I have no intention of.

  This seems to indicate that it is a problem with XP Home, do not recognize the scanner. I did not have this problem with any other USB device. Any suggestions?

  Thank you.

  Hello Onliner999,

  Thank you for your message.  I see that you have installed the correct drivers several times, checking with Canon, it seems that they have a new driver for your product that comes out on 10/26/2009.  Please try to download and install from the link below:
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=17142
  Please let us know if it did or did not resolve the issue.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unknown device in the device error 43 Manager

  I get a 43 unknown device error when I start Windows 7.  I tried every fix I found after ten days of research.  When Windows starts, and the notification is popping up that I can't use my keyboard are so difficult to do anything.  Finally, the message disappears (I don't know why) and I am able to type, or if I catch it just just between notifications.  At this time I started my computer in clean boot mode and no error message appears and the unknown device is not USB device controllers manager.

  What, in my view, that has happened, is that I used to have an LG phone and the software on the computer.  I now have a new phone, Samsung, that I just connected to the same port on the front of the computer.  The Samsung worked, but did not ask me to install the software, then must have run out of the LG.  I deleted the software from LG and then reconnected the Samsung and got the prompt to download the correct software.  I then plugged a generic USB hub device in order to use the phone and any other device that I could plug in (none at this time and I even unplugged the generic hub).

  Now I get the unknown device.  Some fix told me he didn't need a driver, but Windows keeps load a generic driver and so the message repeats the process over and over again.

  Unknown error seems to be a common problem, probably a fix is available from Microsoft.

  Any help would be appreciated more because it drives me crazy!

  Thanks for your reply, Al-Shabaab.  In fact, I solved the problem.

  I deleted all the Verizon and Samsung software on my computer.  When doing this, I noticed that my keyboard has gradually deteriorated (failed to start in safe mode F8 key would not work).

  I bought a new keyboard... and EUREKA!  Problem disappeared!  Then I rebooted my phone software and have had no problems since.  I guess it was a coincidence that the keyboard was dying as I tried to connect my phone to my computer leading me on a GOOSE Chase that was long, difficult and extremely frustrating!

  I appreciate the help and I hope this will help others.

• 4 "other unknown devices" in Device Manager. Windows 7 RTM 64 dv7 1450

  Just bought a computer HP dv7-1450 laptop with AMD Turion X 2 64 processors. Installed Windows 7 RTM 64 and everything seems to work except there are 4 unknown "other devices" listed in Device Manager. The 4 devices are:

  -System base unit (x 3)

  -Unknown Device (x 1)

  I have no idea what are these devices. I tried looking for drivers for chipset on the AMD and HP Web site without result. But I do not know if these are the associated chipsets. One of the devices would be the disk fall sensor hard (it does not appear in the device no matter where Manager)?

  Unfortunately on the HP site, there are not many downloads of drivers available for the 64-bit (Vista). I know that Windows 7 64 drivers won't be available until in October, but if there are not any available Vista drivers either, I expect to see all the drivers for Windows 7?

  The most important thing for me is just to know what are these "other devices" 4 and get the drivers installed.

  Thanks in advance!

  ProtectSmart Hard Drive Protection here

• Satellite C660 - tos6205 unknown device in Device Manager

  Hello
  I am not able to find the drivers. In the Device Manager when I check the details of the "unknown device" it says "TOS6205/ACPI compliant."

  I tried to look for the 'Bluetooth stack"Driver for my model in the pg Driver download. But I seem not to be fined.

  Details of my laptop: -.
  Model: C660-A275
  Short model: PSC1NV (received this box no.)
  OS: Windows 7 Ultimate version 6.1.7600 (build 7600) (I guess it's 32-bit). (the laptop is x 86)

  Please suggest solutions as soon as possible.

  Kind regards
  Sujit

  page drivers Goto
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Enter everything except PSC1NV

  take & set up
  Filter of Bluetooth driver package
  then
  Bluetooth stack

  That's all