Update KB2779562 installation problem?

Similar Questions

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

  Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

  Hi PeterLloyd,

  (1) what is the complete error message you receive?

  (2) what version of Windows you are using on the computer?

  (3) updates are you referring?

  Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Update installation problem (error code: c8000210)

  original title: update installation problem

  Error C8000210

  Thanks for providing all relevant information to help us try to you.

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Some updates of Windows 7 installation problem

  I have Windows 7 Professional 64 bit. It is located to automatically download updates. The problem is that it will install updates, as in Windows Defender, but others will fail, as Microsoft Mouse detection pilot or Hp Printer drivers. Why is - it then all these updates are considered "important"?

  Dolfin152,
  If the updates are for hardware related items, you can go to the manufacturer's website and install them manually.  Then, run Windows Update and see whether or not they are presented again.

  Let us know how it goes.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WINDOWS 8 NOT IS NOT UPDATE, VIEW THE TROUBLESHOOTING TOOL "RECENT INSTALLATION PROBLEM REFRESHES NOT FIXED" THEN WHAT SHOULD I DO?

  Day before yesterday I installed windows and its not updated and have problems upgrading to windows 8.1.

  ITS JUST STOP RESPOND TO CLICK ON WINDOWS UPDATE.

  Doesn't show is not a mistake or a clue.

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista
  https://support.Microsoft.com/en-AU/KB/2700567/

• Satellite P10-304 - update Windows 7 problem

  I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows.

  I reinstalled, deleted the hard drive and reinstalled again. Tried the stop and start the Windows Update utility.
  Downloaded the stand-alone Windows Update.

  Updated the BIOS to V2.0 and downloaded the Toshiba Service Station application (who says no update is necessary).
  All this without success.

  My hopes were raised when I saw that the Station Service for Windows 7 32 bit software was available for the P10 304 but I am now at a loss.

  Anyone know if this laptop can be upgraded to Windows 7 and how to get updates of work?

  Help is welcome.

  Peter

  I'm sure that installation of Windows 7 update problems are not specific to Toshiba problems even if you use the Toshiba laptop.

  From my point of few, you should check the Microsoft support pages to find the solution.
  For example this:
  http://Windows.Microsoft.com/en-us/w...#1TC=Windows-7

  Just a tip: I had some problems in the past to install updates because of the antirust software. He locked the installation of some essential updates and after you disable temporal, updates could be installed...
  Missing Service Packs might concern the single installation of patches.

• Windows Update KB976902 causing problems with Roxio Creator

  I am not able to burn video to a DVD-R after Windows Update KB976902 installation (using Roxio Creator 2011).  I can burn video on CD - R no problem. It was not a problem until I installed this update. I can't do a system restore, the restore point will not go back to the date that I need. Any help would be greatly appreciated!

  Contact the Roxio Support.

  KB976902 is a prerequisite for Win7 SP1 update (expected soon). If KB976902 is not installed, SP1 will not be offered to the computer and you will be able to install it manually.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation problems Thrones and Patriots

  Hey everybody. I have installation problems with elevation of the thrones of nations with the Patriots. I installed rise of nations but the installation successfully Thrones and Patriots he wins in a file called CTW_New_World_Map_01_info_text.xml.18 and then says check to see if I have available disk space, or if the file is in use. It's a brand new model with no other games on it.

  Hi Riseofjohn,
   
  1. have you checked the disk installation for scratches or damage?
  2. don't you try to install the game in the other computer?
  3. What is the operating system that is currently installed on your computer?
   
  First of all I suggest to perform a disk cleanup and check whether the problem is resolved.
   
  The disk cleanup tool helps you free up space on your hard disk to improve your computer's performance. The tool identifies files that you can safely remove, and then allows you to choose if you want to remove some or all of the files identified.
  
  To use disk cleanup in Windows 7 follow these steps below.
   
  a. Click Start, click programs, accessories principally made, click System Tools and then click on disk cleanup. If several readers are available, you may be asked to specify which drive you want to clean.
  b. when disk cleanup has calculated how much space you can free of charge, in the dialog cleaning disc, scroll through the content of the files to delete list.
   
  

  Disk Cleanup dialog box

  c. clear the check boxes for files that you do not want to delete, and then click OK.

  For more options, such as cleaning of system restore and files copy of Shadow, under Description, click on clean up the system files, and then click the other Options tab.
  d. When you are prompted to confirm that you want to remove the files specified, click Yes.
   
  After a few minutes, the process is completed, and close the Disk Cleanup dialog box, leaving your computer more efficient and clean better.
   
  I also suggest you to run chkdsk.
  Follow these steps:
   
  a. click on start
  b. Type "cmd" in the start search box
  c. right-click on cmd.exe list programs and then select the run as Administrator option. If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  d. in the command prompt window, type the following command and press enter Chkdsk/r X:
   Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.
  a. press y when you are prompted to check the drive the next time the system restarts.
  b. close all applications and restart the computer.
   
  Note: upon reboot, Windows checks the drive for errors, and then Windows starts
  
  After the computer restarts, repeat steps 1 through 4 for the other volume and then check if the disk cleanup works.
   
  If the steps provided above does not resolve the problem then I suggest to install the game using the cleanboot and check for the issue.
  Put your system to the clean boot state helps determine if third-party applications or startup items
  the origin of the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and re-
  install the program.
  See KB Microsoft article below for more information on how to resolve a problem by doing a
  clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135  
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above KB
  article.
  I suggest also allows you to check the compatibility of the game with the Windows 7 operating system.

   

  To do this, you can visit this link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/         

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Trust existing cat pack 17028 webcam installation problem

  Trust existing Chatpack 17028 installation problem

  I bought the above web cam/headset (wilkinsons uk) connected the webcam usb and headphones pink/green taken then nothing? I looked at the site www.trust.com/17028 trust and he said he didn't have drivers? (without cd/disk provided). I tried the test on the site of confidence, but just got webcam blurry moving lines. I looked in the re sounds Control Panel / audio, but no new material seems to be there. I have windows xp... Thank you for your

  Hi Tony,.

  ·         Did you check if the webcam is displayed in Device Manager?

  Try the following.

  Method 1: Run the next Fixit tool and see if it helps.

  Hardware devices do not work or are not detected in Windows

  Method 2: Try to update the Device Manager drivers\software.

  a. click the Start button and then right click on my computer. Click on Properties.

  b. click on the hardware tab, and then click Device Manager.

  c. to see the webcam that have been added to the computer, double-click imaging devices.

  d. right-click on the webcam and then click Update driver software. Windows must now seek the latest drivers/software.

• Updates Windows installs - Error 8000FFFF

  Whenever I try to install an update through Windows Update, I get the same error: 0x8000FFFF. I tried the solution given here, but these registry values do not exist in my registry so the problem is something else. I was not able to install an important update in a very long time (some updates requiring installation go all the way back for 2009!). Because of this window will let me install Internet Explorer 9 and Security Essentials. Updates only that it allows me to install Silverlight and Microsoft Office updates are, are not as important as the updates of security and whatnot. Any help?

  Windows Vista Edition Home Premium 32 bit SP2

  Time to try it here:

  http://supportservices.Microsoft.com/support/services/windows_update>

  If you find the answer to your problem, please let us know! I hope someone else can benefit from your solution.

  09:52:2107/13/11

• PHOTOSMART AIO C309a PRINTER installation problems

  Hello. First, I installed theC309 with the cd that had top windows7. and hp solution Center isn't open might 14.1. Did a new install of HP web site with 32-bit windows driver software 7 that everything was great, even the center of solution a few days later, when I tried to sweep the center of solution would not open again with the same message on installation is not complete. He invites you to plug usb, but if you do that you lose your wireless connection and the solution Center does not always open.

  I was on the page of AMAZON review for HP printers and saw so many people frustrated with installation problems. The printers that you have always been for me, but I spent way too much time with their installation lately there is any real help out there / I tried all the patches and updates to your web site.

  Hello, I had the network utility, but not the scan utility so I tried and it seems to have solved the problem of the question. The HP Solutions Center now works and gives an assessment of own health with the exception of a few problems of façade YOU THANKED me.

• DB 12 c on the Oracle Linux 7.1 installation problem

  Hello

  I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

  Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

  I'm stuck at 8, it's the following message is displayed:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3640

  Additional information: 1543399787

  Process ID: 0

  Session IDs: serial number 0: 0

  I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

  cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

  I missed something?

  Comments are welcome!

  Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

• Flash Player installation problems - WinXP

  Hello

  I currently have v21.0.0.242 of Flash Player installed in Firefox on my Windows XP SP2 PC, but if I can download v22, it will not start in order for me to install it.

  I saw an article (#8) here: Installation problems | Flash Player | Windows 7 and earlier versions, but, even if it leads to a place at Microsoft Support to get an update of the file supposed to be necessary for SHA - 256 certificates, this isn't just for Windows Vista and Windows Server 2008, Windows XP.

  In addition, another thread in this Forum addresses the versions of Windows XP 64-bit, but mine is 32-bit.

  Finally, I heard talk about some recent software installers being configured in a way to WinXP can not read to launch, but I hope that's not true here, or that there is a workaround solution for that.

  Can you please help me with this?

  Thank you very much

  Bram Weiser

  I can't speak as to why the update is not eligible for your Vista system.  It would be a matter of Microsoft.

  I don't see Adobe take back a signing certificate less secure as we head to sha256, i.e. the last signature technologies safer. Microsoft also announced (just now) they are falling for the old version, sha1.  You will see this more, not with righteous installers, but with both sites (sites that use HTTPS instead of HTTP protocol).  If an HTTPS Web site uses a certificate that is always sha1 Microsoft will show the lock snapped during a visit to this page, instead of the secure lock.

  You can try to opt in the background updates to see if it works.  To do this, go to control panel > all items in the control panel > Flash Player > updated tab > select "allow Adobe to install updates (recommended).