update of error80073712 help anddt000 problems?

Similar Questions

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• Are there any important updates for windows 8 that help stop problems?

  Please give me the name of these updates, which contributed to major problems in windows 8?

  The 8.1 update resolves more than 400 has reported problems, crashes, bugs and glitches.

  But each are cumulative: you cannot install hotfixes later until you install the previous ones.  Each of them is based on the previous to avoid file version conflicts.

  Once you have installed all the updates available, if you have any questions, we can focus on them. What questions do you have?

• Popup declared attempt to access Firefox; clocked to 'block '. now can not access ALL Web sites; update did not help; What's wrong??

  Reported popup web site tries to access Firefox (don't remember exact message); available buttons: allow once, allow, block; has chosen the block (I selected allow once before, but that seemed to be a bad idea). After that, I get "Unable to connect" no matter where I go. You had to use IE to join of Mozilla.org. Firefox update did not help. Troubleshooting procedure did not help.

  Hello, this looks like a problem with your security/firewall software blocking the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• update of iOS 9.3 problem

  Hello all help big problem ios 9.3. Gustomer problem icloud update aktivaet icloud idi password error.

  (ios 9.3  problem) (ios 9.3  problem).

  Your message is not clear... do not hesitate to write a message detailed in your own language, then, we can use our translation service of choice

  First of all, you do not tell us your device - BUT - iOS 9.3 is usually an installation broken for MANY devices - you can read about the problems in the present statutes

  • If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support
  • Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous
  • Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac
  • GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors
  • If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support
  • 9.3 iOS update issues

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• HP655 update for windows 8.1 problem with Realtek driver

  Need help with the problem addressed in another forum HP.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/HP-655-update-to-Windows-8-1-problem-...

  The last message point far on this forum to get help.

  -----------,

  Install the new Bios and the network works

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Windows Update will not install 9 latest updates recommended, need help!

  I tried to install:

  KB980182
  KB977816
  KB978338
  KB979683
  KB980232
  KB981332
  KB905866
  KB976264
  KB980248

  pls help

  Hello

   

  
  a. don't you encounter any error message when you try to install or download updates?

   

  You can view the history of update to find errors.

  Let us make the below listed methods one by one and check if you are able to install these updates successfully.

  
  Method 1.
  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

   

  For steps about how to run this utility, refer to the article below.
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2.

  Try also download and install these updates manually and check. Visit the Web site below and look for the number of update and choose the right operating system for the update and try to download and install.

  http://www.Microsoft.com/downloads/en/default.aspx

  
  Method 3.
  I would ask you to reset the Windows Update components and check if you still get this error message.
  Click the Fix It button in the article below to do it automatically or you can do it manually. For more information, refer to the article below.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  
  Method 4.
  I would also recommend to install the Windows Update Agent to manage the updates on your computer.
  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Method 5.

  I ask you to download the journal of cbs on the skydrive.

  Navigate to the following location on your computer C:\Windows\Logs\CBS\CBS.log Can and upload your log to your public folder the SkyDrive for analysis.

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After windows auto updates can't open Internet Explorer, but can open firefox. Vista Home Premium, CA Security Suite. Can do system restore and get on, but it will update the next day and problem reports.

  I get a popup to firewall this tells me Internet Explorer tent to access internet I click on allow but get no results. Then I get this page can not be displayed, and you are not logged as an administrator

  Hi Snoopy65,

  Welcome to the Microsoft Answers site!

  Perform a system restore and then try to install each updates manually one by one. Each time that you install the update, restart the computer. Take note of the update that is causing the problem and let us know. We will be in a better place to help you if we know the exact update which is causing the problem.

  To run the system restore

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "update.exe has encountered a problem and needs to close. We are sorry for the inconvinience.

  Hello

  Uses a deployment tool to deploy the patches in the environment, and this time after doing so I am getting an error below

  "update.exe has encountered a problem and needs to close. We are sorry for the inconvinience.

  Please help its critics.

  Concerning

  Vikram

  It is a forum for specific consumers.

  You will find appropriate support (such as it is) in this forum-online http://social.technet.microsoft.com/Forums/en-US/itproxpsp

• Auto update under xp home sp2 problem - will not start

  original title: auto update under xp home sp2 problem

  I am currently running xp sp2 and my auto Security Center updates has been disabled and will not let me turn it back on. I can enable it in the Control Panel, but when I open the Security Center icon is always off. I would be grateful for any help that anyone can give me. Thanks for reading, Jim.

  Yerman,

  When was the last time you checked your system for malicious programs. Just out of curiosity

  Run a Malware scan on your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx>

  In addition, suggest that you scan your computer with MalwareBytes' to remove all traces that may still be present.

  MalwareBytes Anti-Malware (MBAM)

  http://www.Malwarebytes.com/>

  The free version of MBAM is a scanner at the request and offer ' real-time ' protection. Keep and use it as a ' second opinion ' scanner.

  06/08 / 1109:00: 30 pm

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• Windows Vista will be preform no updates anyone can help, thank you

  Windows Vista will be preform no updates anyone can help, thank you

  Hello

  1. what happens when you try to run Windows Update? You get an error message? If Yes, what is the exact full error message?

  2. you have made no changes to the computer before the broadcast took place?

  3. is the specific question of an update?

  Method 1:

  Run Windows Update Reset (aggressive mode):

  http://support.Microsoft.com/kb/971058

  Now, restart the computer and check the update.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Download the update system analysis tool version of operating system and control accordingly.

  http://support.Microsoft.com/kb/947821

  How to check the updates failed:

  If you access windows update by clicking the Start button to in address bar type windows update and click on enter, click on updates of the review, and it will show you what that is either installed or not updated.

  If the problem remains even in collect and send the Windows Update log.

   

  Follow the below article to collect the log file:

   

  http://support.Microsoft.com/kb/902093

  Use SkyDrive download collected files and post screen/image capture

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

  Hope the above information is helpful.

• Update of Lightroom 6 CC problems

  Hi forum,

  I have some problems my Lightroom 6 CC, desktop Version of Windows Update.

  I have first to download the evaluation version and tested it for 30 days.

  I bought the license office.

  When I try to update my Lightroom (Help\Update) the Assistant-CC starts and stops at 2%

  with the message: try to connect to the server.

  I already successfully checked with the help of adobe (hosts file, configuration of the Explorer, etc.) -no effect.

  By the way: do I really need the CC Assistant since I use the desktop version?

  How I am updating the Lightroom?

  Thank you

  It seems that his tent always to invoke enforcement creative cloud in updates, which do not and the creative application of Cloud is not able to get the update.

  If you then uninstall only Adobe Creative error of cloud, Lightroom will display a message about the damaged MAO.

  Try to go for a new installation process solve this problem.

  It could be a long process for you, but I suggest you try the following steps:

  1. make sure you know the location of your Lightroom catalog that can be checked under the catalog settings in Lightroom.

  2 exit the Lightroom program

  3 uninstall Adobe Creative Cloud application and Lightroom.

  4 rename the following folders: (you can skip this part if you are having trouble, just to clean install)

  • C:\Program Files (x 86) \Common Files\Adobe\SLCache: Rename SLCache to SLCache-old
  • C:\Program Files (x 86) \Common Files\Adobe\Adobe PCD: Adobe PCD and rename the Adobe PCD-old
  • C:\Program Files (x 86) \Common Files\Adobe\OOBE: Rename old OOBE OOBE
  • C:\ProgramData\Adobe\SLStore: Rename SLStore to SLStore-old
  • C:\Users\chesriva\AppData\Local\Adobe\OOBE: Rename OOBE of former OOBE

  5 reinstall Lightroom 6 from this link: Download Photoshop Lightroom

  6. license it with your serial number.

  7 right-click on the Lightroom icon and choose Run as administrator and then go to help > check for updates.

  Let me know if you still face difficulties.