Updated HP Device Manager 4.6 SP3 (OpenSSL vulnerability)

Similar Questions

• How to fix a sound problem - reading devices no. for the Device Manager on WinXP SP3?

  (1) I can't to Device Manager by following the guide for help on my system.  The steps do not match what is actually showing me my Windows and I can not here the only way I can get to it is to use a link on the help page directly.  Even when I do that, the steps in the help guide still do not match what I see on MY screen.  Is this perhaps an update of this Guide to match my system?

  (2) I need Device Manager to find out what happened on my Audio device.  I have no sound from my speakers.  It happened all of a sudden when my wife was using the computer.  I don't know what she can do both.

  Start/Settings/Control Panel / sounds and Audio Devices Properties shows "No. Audio Device", hence "Volume of the device" is gray.  Audio tab displays 'No peripheral to read '.

  The fastest way to bring up the Device Manager is:
  Start-> Run-> "devmgmt.msc".
  If it detects the sound equipment, but there is a problem with a driver, you will probably see a yellow "!" appears by your audio device.

  If he was working and stopped, you can try to perform a "System Restore" to a point where it worked:

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• updated HP device manager 4.5 attempted to sp4

  Hello

  I tried to upgrade 4.5 hp Device Manager to sp4.  The installation seems to complete ok, but then an error appeared at the end of installation the indicating that the installation has not completed correctly and to check the logs.

  Now, I try to launch the application, and the application does not load.  Where are the logs of installation? and if anyone has encountered this error in the past.  Anyone know how to solve this problem and get the product once more work?

  I tried to restart the services, does not.

  Thanks in advance

  Concerning

  CA

  It turns out that an additional user has been connected to the remote server.  As soon as I disconnected the user and tried re installing the application installed correctly.

  Detective Conan.  I want these types of problems have always been that simple.

• I recently bought a copy of windows xp pro sp2 oem but when it is installed in the Device Manager is showing sp3. How would I know if it is a legal or illegal?

  The cd and the packaging looks authentic

  I would go for the link of piracy, I gave you and check directly with MS. MS - MVP - Elephant Boy computers - Don ' t Panic!

• I can't find an update for my device manager

  I tried to find updates for my device manager and it does not download properly, anyone know what to do.

  Hello

  1 are you referring to device drivers in Device Manager?

  2. What are you can perform in Device Manager?

  3. what you are trying to download?

  You can't update the Device Manager, and there is no update available for the same thing.

  Please provide more information on the issue to get help.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Also check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

• Pls check your Android Device Manager

  A change without notice when the Google app play Services is updated, Android device management in the United Nations controls settings > Security > directors of device that would mean you cannot use this function to locate, lock or delete your lost Moto X.

  http://www.androidpolice.com/2013/11/06/PSA-the-latest-Google-play-services-update-may-disable-andro...

  This update has affected my VZW Moto X... don't know about the other variants of the carrier.

  HTH

• Windows XP sp3 has suddenly stopped show all devices in Device Manager.

  Found problem when I couldn't put any printer online or can I install a new device. Everything else seems OK with a USB hard drive and modem works fine. Queue Pinter seems to have several printing with no name, but all around 34 bytes which keep coming back when removed.

  Hello

  1. you receive an error message when you access the Device Manager?

  2 have you made changes on the computer before this problem?

  3. What is the brand and model of the printer?

  Method 1:

  Follow the articles and check them out below:

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539

  Download the update and check:

  Device Manager may not show that all devices and network connections may not display network connections after installing Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/953979

  Method 2:

  Assessment of problem printer if the Printer Spooler service is running.

  Step 1.

  You can start the print spooler by using the following procedure:

  a. in the Administrative Tools folder (click Start, then Control Panel, then system and Maintenance and then Administrative Tools), open the Services snap-in.

  b. Locate the print spooler service in the services list and confirm that the status is started. If this is not the case, select the service, and on the Action menu, click Start.

  You can also do this from an elevated command prompt window (right click on prompt in the start menu and click Run as administrator) by typing the following command: net stop spooler & net start spooler

  (It of actually two commands, "Net stop spooler" and "Net start spooler", came at the same time for that process control Windows both, one after the other).

  Step 2.

  To start the dependencies for the print spooler service, follow these steps:

  a. in Services, right-click on print spooler and then click Properties.

  b. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.

  c. take note of each service, click OK, and then restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.

  Reference: http://support.microsoft.com/kb/946737

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Hope the above information is helpful.

• Why is unknown in the device manager that will not disappear with the update disc

  Its been two weeks preparing the motherboard as possible for the repair of the BONE, but there is now an unknown in device Mangr which did not exist before that I was doing all the Driver Update with the drive to the motherboard. Will be also someone please tell me why a CD with drivers for ASUS and motherboard support options change to a file only as reading support only, but it was like an installation disk? I mean he had the factor graph and as multi-format, now it gives just files and are not a pleasure drive anymore? Can I change it back? What happened to him? I did try and she put the BIOS on diskette for a flash for a one-way effort, but it has not worked for me! I messed up the CD? I don't see how?

  Hello

  • This "graphic factor" are you referring?
   
  You can check this link:
   
  How to troubleshoot unknown devices listed in Device Manager in Windows XP
   
  http://support.Microsoft.com/kb/314464
  

• It says I need to update my video device driver? I found my device manager is empty, it is all the?

  When I try to play videos, they are very restless. It is said to update my video device driver. When I went to my device manager it was empty. I don't know how to solve these 2 problems. Can someone please?

  Thank you

  This can solve both problems, certainly the Virgin Device Manager.

  http://support.Microsoft.com/kb/311504

  This is for XP, but I don't see why it wouldn't also apply to vista.

  SYMPTOMS

  When you open Device Manager, no devices appear in the list. Instead, a blank window appears.
   
  CAUSE
  This problem occurs if the Plug-and-Play service has been disabled (disabled).
   
  RESOLUTION
  To resolve this problem, set the startup type for Plug-and-Play on automatic. To do this, follow these steps:

  1. Click Start, click run, type services.msc and click OK.
  2. Double-click Plug-and-Play.

     If you receive a Configuration Manager message, click OK.

  3. In the Startup Type list, click Automatic, and then click OK.
  4. Services nearby.
  5. Restart the computer.

  STATUS

  This behavior is by design. MORE INFORMATION
  Plug-and-Play is a main operating system service, and therefore, it is best to not disable. It works in normal mode and in safe mode.

• Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  I have windows vista 32 bit.
  -------------------------------------------------------------------------------------------------
  Re-edit:-I do not use the Device Manager to find all my drivers and by clicking on each of them... one at a time update.
  Y at - it another way to find and update the drivers at the same time and for free.

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• Device Manager have to finish installing updated driver (recommended)

  I get this message every time I boot my laptop. I took the ask me later option and checked to see if I have the latest update of driver (NVIDIA GeForce 8200 m) and Device Manager indicates that I do. I check with NVIDIA and they want delete me the two files that I can't find in the registry (ISUSPM startup) and ISUSScheduler. Another site says remove the driver and install it manually. NVIDIA recommends the use of my computer is built to do the installation. What should I do?

  I tried the solution of joel S but it did not work. I still got the message "finish the installation of the driver." I did a search online and stumbled on what seems to have solved the problem. Some people think UAC is the problem and suggested to disable. Then I turned off the User Account Control feature and rebooted my computer. The message went away after I restarted my computer. I have re-enabled the UAC feature and the problem did not return. I don't update my NVIDIA driver anytime soon. From what I found on the net, NVIDIA has had this problem with their drivers for a couple of years.

• Error code 10 updating the Microsoft teredo tunneling adapter driver via Device Manager

  Hi, I have a hp pavillion dv6 with windows 7 64-bit edition. I saw the yellow exclamation point in Device Manager and when I try to update this driver by let me pick up the driver (it says error code 10) or research online (updated driver already installed). What should I do to remove this yellow question mark in Device Manager? Thank you.

  Original title: teredo tunneling adapter microsoft

  Hello Hamdullah,

  Please keep us updated on the status of the issue.

  Please refer to the suggestions of Mohammed Raieed said on January 16, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter/27162f78-d3b2-4A80-8166-b5596ca9fa11

  I hope this information helps.

  Thank you

• CD drive does not read discs, can not update "multimedia controller" in Device Manager

  Hello, I tried to get my CD drive to read CDs and DVDs and we tried the update driver software.

  It says my driver "matshita dvd ram uj 850 s ATA device ' is up-to-date, but I see no specific driver CD, but no yellow exclamation point in" readers of CD-ROM/DVD-Rom ".

  The only thing with a yellow exclamation mark in Device Manager is in "other devices" and is called "multimedia controller".

  When I try to update this device it says

  "windows driver not found software for your device.

  I tried to uninstall the driver and then restart, but he still has the exclamation yellow on restart.

  I have a sony VAIO pcg8w1m with windows 7 ultimate.
  Does anyone know which specific driver, I'm looking or if something can be a problem?
  Someone at - it other ideas I could try? Thanks for reading this!

  OK, for the problem with the CD of music sometimes having "exclusive mode" active "blocks" audio CD so try disabling the "exclusive mode":

  Right click on the speaker icon in the Notification area of the taskbar > playback devices > then under "Playback" tab, click on "Speakers" (or the default unit) > properties > advanced > remove the check mark in front of "Allow applications to take exclusive control of this device" > OK

  For the "unknown device" can you, in Device Manager, right click on the "unknown device" and "Uninstall" the device and restart the computer and let Windows redetect the device.

  The device still presents itself as an "unknown device"?

• Update blackBerry Smartphones / Device Manager issue

  Hey guys, I have a problem.

  I recently acquired a Blackberry 8330 and let me start by saying this: it's one of the best machines I've ever held. It is simply amazing.

  I installed the Device Manager and have been using it without any problem. Then, I went and did an update wireless with my phone, the upgrade of the OS. Since I did this, however, the Manager has recently stopped recognizing my device - my computer recognizes him again, as he charges when it is plugged in and I can always access to the hard drive, but for some reason, I cannot use the Device Manager to do anything - down, States in the Device Manager there is no trendy Black Berry as shown by the 'None' exposed next to the Pin number.

  What can I do? I really need to access blackberry via the Device Manager. Someone, please help > _

  Things I've tried:

  -Restart the Blackberry (both by pressing the red button and pull the battery and re insert)

  -Update the device to the more recent version Manager

  -The latest version is uninstalled, then download and install the version provided with the blackberry (4.2)

  I noticed that the CD that came with the device itself does not contain the most recent edition of the Device Manager, if that means anything. It's just weird that the Device Manager has stopped working after I upgraded. Currently, my OS is V4.5.0.175. I've recently updated both my 8310 Black Berry - same question parents. Before, I could access it via Device Manager. Now, I can't. Please help me!

  -Santos

  Ahhhh Yes... interesting... try these:

  Here is the list of troubleshooting atricles... I hope that something will be useful:

  http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  KB02640 Troubleshooting USB connections
  KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  KB01451 How to enable Sync advanced logging if a wired synchronization fails

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these.

  I hope that something it is useful!

  See you soon!

• Update wireless card sees didn't not in Device Manager

  Quick preface...

  Likely to create problems for me which are not necessary, but...

  wanted to install a wireless card in my dv2415nr who had the band N.  Find p/n 436255-001 which is "compatible" with the cell phones of 2400 series?

  He does not see in the Device Manager when I boot.  I have re-installed the abg wireless card came with the laptop.  It appears in Device Manager and works well.

  Is it possible to get the laptop to recognize the new wireless card?

  Here is a link to all revisions of the pilot.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-78841-1&mode=5&prodTypeId=321957&prodSeriesId=3688868

  Click on the blue link driver next to the date to install this version.

  The most recent one listed may not install unless you do it manually.

  In any case, one of the most recent from 2012 will work. I think I got the last being installed, but I did it manually.