Upgrade of malfunction!

Similar Questions

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Smart phone BlackBerry Smartphones is malfunctioning after the upgrade.

  Hello

  I just got my blackberry a few weeks ago, and it worked perfectly until I've downloaded BlackBerry Desktop Manager, plugged in my camera and updated... It works much more slowly. There is a good 5-15 seconds when you try to access the menu of the delays and it will freeze while I'm answering incoming calls. Also I woke up no longer works. There is no sound coming out when it goes off, the volume is set to high, but it still sounds when someone calls me. It worked before the update, and I changed no settings after. Is there a way to roll back the update. I thought that updates were supposed to solve problems and issues, not to create them.

  Thank you C

  PS It's a BlackBerry 9000 by Rogers, o/s. 4.6.0.303

  Hmm... When he began to occur after the update I removed the battery put it and restarted it, but it did not help. Five minutes ago I accidentally dropped it it and the battery fell... Turn again, and it works very well, so far. I guess that it needed, it was a quick kick in the * beep *, as may parents TV old

  

• Only get a gray screen after upgrade of El Capitan. What can I do?

  I tried to install an upgrade, but only now have a gray screen.  The installation seems to have stopped half way through.

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• After the upgrade to the new version of firefox 13.01 I can't play video on youtube and other sites what should I do?

  After the upgrade to the latest version 13.0.1

  I can't open videos from youtube and other sites

  I tried all the solutions, but none works

  I would also consider the following. Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 13 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

  To resolve this problem, follow the steps in these articles in the Knowledge Base:

  Flash Plugin - maintain and troubleshoot

  Adobe Flash plugin has crashed - avoid that it happen

  11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  http://forums.Adobe.com/thread/1018071?TSTART=0

  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!

• The UPGRADE of processor in NB520: of N550 at N2800

  Hello everyone. This is my first post. My question is this:

  I've a Toshiba NB520 netbook with an Intel Atom N550 processor. I would like to know if I can upgrade the processor * welding * a N2800. This is the same socket: BGA559.
  I don't know if the BIOS or chipset would recognize the processor.

  Can you help me? Thank you!

  Hello
  To my knowledge the processors are not welded but "nested" which means that the processor is removable from the system board.
  But this does not mean that the party must be exchanged/updated or changed.

  In most cases, the BIOS does not work with the replaced CPU which causes a malfunction of the machine. The other reason that could make this not recommended is the chipsets support.
  However, support for chipsets can be checked on the Intel ARK Web site.

  But I m wondering why you want to upgrade the processor? The performance difference isn't important.
  Of course, you'd get a faster processor, but the performance gain will be not noticeable.

  My advice: replace the HARD drive with a new SSD. It's much better choice to increase the performance of s for laptop.

• Satellite C850D-11 q - No. Bluetooth after upgrade Windows 10

  Hello
  Just upgraded to win 10... nothing about Bluetooth in Device Manager... this model not have these abilities or are malfunctioning... tia

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

• Satellite A660 - 11 M - Memory Upgrade - problem

  Hello world!

  I'm having a problem with upgrading my RAm 4 GB to 8 GB memory ([link crucial 8 GB Kit | http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=28543EEAA5CA7304]) which should be compatible.

  When I turn on the laptop after mounting of the modules to all first all seem to be right and the Bios start, but then it will not load windows and stucks on a black screen.

  Could someone help?

  Thank you!

  Hello

  What to say: it looks like it s a problem with new RAM modules.
  The RAM modules aren t fully compatible or they malfunction.
  You must use other modules I made good experiences with modules from Kingston.

• Attack of the kernel after upgrading to El Capitan

  I need help and fashionable of despair. I get an error Kernel attack (such as published in full below) and can rule out a hardware malfunction. My situation is unique in the sense that I had a MacBook 2011 Pro - I upgraded to El Capitan and began to get the kernel attacks every twenty minutes or more. I ended up doing a restore of my Time Machine backup (which was of Yosemite), and the problem stopped. The interesting thing is that the time machine backup, while in Yosemite, never came back save El Capitan.

  I bought a new MacBook Pro from Apple and restored my backup time computer machine and then upgraded to El Capitan backup, as he showed in my remarkable applications. Although less frequent, the attacks returned core. I got on the phone with Apple and we did a cover of the OSX drive on two of my computers. I get still kernel tackles. It's very frustrating and any help would be greatly appreciated.

  Anonymous UUID: 9A1431EE-FA42-9921-CDE2-2604EFA46733

  Wed Mar 30 20:12:16 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff8006b1fff0): "link element invalid queue for 0xffffff8043382000: 0xffffff80433ace40 next next-> prev 0 prev prev-> next 0x38"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.40.184/osfmk/kern/queu e.h:245 0xffffff80417789c8.

  Backtrace (2 CPU), Frame: Return address

  0xffffff91f4cbbcb0: 0xffffff8006adab12

  0xffffff91f4cbbd30: 0xffffff8006b1fff0

  0xffffff91f4cbbd70: 0xffffff8006b1c7e2

  0xffffff91f4cbbe50: 0xffffff8006ae4d59

  0xffffff91f4cbbe70: 0xffffff7f8723d077

  0xffffff91f4cbbea0: 0xffffff7f8723de29

  0xffffff91f4cbbf00: 0xffffff8006b0f1ea

  0xffffff91f4cbbfb0: 0xffffff8006bc8e27

  Extensions of core in backtrace:

  com.symantec.kext.internetSecurity (5.4f7) [852B8212-F3BE-D5F6-87F6-84B8D6517550] @0xffffff7f8723c000-> 0xffffff7f8724afff

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel: 0 x 0000000006800000

  Text of core base: 0xffffff8006a00000

  Text __HIB base: 0xffffff8006900000

  Name of system model: MacBookPro12, 1 (Mac-E43C1C25D4880AD6)

  Availability of the system in nanoseconds: 7646056019303

  last load kext to 4181530331876: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f89655000 size 32768)

  Finally unloaded kext to 137779832539: com.apple.driver.AppleIntelLpssI2C 2.0.60 (addr 0xffffff7f88ed4000 size 40960)

  kexts responsible:

  com Symantec.kext.PF 5.7.1f4

  com.symantec.kext.internetSecurity 5.4f7

  com.apple.iokit.IOBluetoothUSBDFU 4.4.4f4

  com Apple.filesystems.afpfs 11.0

  com Apple.NKE.asp - tcp 8.0.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AudioAUUC 1.70

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AGPM 110.21.18

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHDA 274.7

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleIntelBDWGraphics 10.1.4

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleCameraInterface 5.46.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleIntelBDWGraphicsFramebuffer 10.1.4

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleTopCaseHIDEventDriver 86

  com.apple.driver.AirPort.Brcm4360 1040.1.1a6

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.security.SecureRemotePassword 1.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 274.7

  com.apple.kext.OSvKernDSPLib 525

  com.apple.driver.AppleIntelLpssUARTCommon 2.0.60

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.iokit.IOSurface 108.2.1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 205.3

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.CoreStorage 517.20.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.AppleMultitouchDriver 304.10.2

  com.apple.driver.AppleHIDTransport 5

  com.apple.driver.AppleHSSPIHIDDriver 43

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.AppleHSSPISupport 43

  com.apple.driver.AppleIntelLpssSpiController 2.0.60

  com.apple.driver.AppleIntelLpssGspi 2.0.60

  com.apple.driver.AppleIntelLpssDmac 2.0.60

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacBookPro12, 1, MBP121.0167.B16 of BootROM, 2 processors, Intel Core i7, 3.1 GHz, 16 GB, MSC 2.28f7

  Graphics card: Intel Graphics Iris 6100 6100, integrated Intel Iris graphics card

  Memory module: DIMM0/0, 8 GB DDR3, BANK 1867 MHz, 0x02FE, 0x4544464232333241314D412D4A442D460000

  Memory module: DIMM0/1, 8 GB DDR3, BANK 1867 MHz, 0x02FE, 0x4544464232333241314D412D4A442D460000

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 133), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

  Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SSD SM1024G, 1 TB

  USB device: USB 3.0 Bus

  USB Device: Card reader

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Pro, Apple Inc., 27.1

  Please remove the Norton/Symantec products in accordance with these instructions. If you have a different version of the product, the steps may be different. If you have tried to remove it by dragging an application to the trash, reinstall it and finish the job.

  Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

• Blue screen after upgrading to Win 8.1 - Satellite C850 - 17G

  A year ago, I bought a Satellite C850 - 17 G (PSKCCE) with Windows 7 pre-installed. For a small fee, I upgraded to Win 8. Worked well.

  In November 2013, I wanted to do the free update to Win8.1. There I estimated at 2.5 months and a lot of reading on the forums to complete the upgrade to 8.1 Win. Everything worked fine for about 3 weeks.

  Can I get some updated windows up-to-date pressed, restarted the laptop and it ended the history of success.
  Blue screen and I had this option was to force back to the factory settings.
  So here I am again with Windows 7.

  On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win. Can someone tell me why?

  It will support in the future?

  > On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win

  Hmm, I guess you're wrong because on the Toshiba UE driver page I could find drivers Windows 8.1 for the Satellite C850 PSKCCE
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  BSOD issues are really bothersome, because this can happen due to hardware malfunction or also due to problems of system or driver.
  Same 3rd party software could affect systems

  That's why it very difficult to say what might cause this problem without checks unique pieces, the pilot, and the reporting system.

• Satellite P10 804 will not accept the upgrade of RAM

  Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

  In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

  Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

  The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

  Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

  Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

  1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

  The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

  Any advice welcome. Thanks for reading.

  > The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

  Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

  The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

  So it must be a module problem

• Satellite P105-S6024 upgrade processor T7400

  Welcome

  Welcome

  I wanted to replace the processor in a laptop Toshiba Satellite P105-S6024.
  I bought the CPU for $200 (core 2 duo T7400 of).-connected new processor T7400 and laptop are not included, which could be the problem.
  I have 4, 70 - BIOS if the BIOS supports the T7400 processor, otherwise please write quick bios that supports the device T7400 processor

  Help, please

  Post edited by: krzysiekrk

  > have the BIOS 4, 70-if the BIOS supports the T7400 processor supported, if not please write quick bios that supports the device T7400 processor
  LOL :D

  Maybe you should check this FAQ from Toshiba:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=13

  You will find the information that the processor is removable, but this does not mean that you could improve it.
  As you mentioned that it might be a BIOS compatibility issue and this would lead to a malfunction of the laptop so simply said CPU and GPU upgrades are not supported and if you want to upgrade the processor then you can do this ONLY at YOUR OWN RISK.

  Well done dude

• Satellite L300 - beep after Windows 7 upgrade loop

  Hello

  I have the laptop next

  Toshiba Satellite L300
  Number of model PSLB8E - 15W007EN
  Serial 99086404Q

  I'm trying to upgrade to windows 7, it completed the process of installation, but when I boot, the laptop is a continuous loop off beep (sounds like she a loop of 22 beep... If that's any help), then shows a blue on the screen if you have installed new hardware, etc. So, I go to repair system that fails, please someone help me.

  Thank you

  Welshie

  Hi Welshie_1,

  These beep codes mean usually there is a hardware malfunction detected

  You can start in safe mode?
  Have you noticed the beep code when you go into the BIOS too?

  You can install Windows recovery disk Toshiba or you get a bluescreen too?

• Upgrading memory on Satellite Pro L40 - 15A

  Hello

  I have the Satellite Pro L40 - 15A with 512 MB of memory (Samsung), but I'm not going to 1 GB. I have Kingston ktt667d2 / 1 g I tray to put into the two slots, but nothing works I can't spend on computer.

  But when I change to old laptop is ok. What can I do? Install special program update the BIOS, or maybe the memory stick is broken.
  Concerning

  Hello

  Safe computer laptop doesn t after upgrading memory due to these different problems;

  -memory modules are not compatible set
  -memory modules are not compatible with the laptop
  -memory modules are defective
  -a memory slots is defective

  In most cases, replace the memory module helps.

  A hint; have you tried to move the modules of memory in the slots? Sometimes it helps.
  A few weeks ago I updated my memory and safe laptop didn t.
  I thought that it s a malfunction of memory, but after the switch module Notepad started successfully.

  Good luck