URGENT: Some USB devices no longer work in Fusion 3!

Similar Questions

• Some USB devices are more recognized when plugged after upgrading Fusion 7

  After reclassification of the merger of 6 to 7, some USB devices, specifically webcams is faster to connect to Windows (guest) or Host (osx).

  They also no longer appear in the USB & Bluetooth under the Virtual Machine settings.  Anyone else see this problem?  Try to understand this point, I completely uninstalled merger to try to solve this problem.  Webcams work fine under OSX itself and are usable.

  7 merger supports a virtual USB camera, that can be added as a new device in the virtual machine settings. This allows the physical camera (USB or integrated PCIe FaceTime HD) to share between the host and the VM at the same time.

  There is currently no option in the settings of the VM to UN-hide USB cameras for passthrough to the virtual machine, but it can be done with a preference.

  Edit the ~/Library/Preferences/VMware\ Fusion/preferences file and add the following line:

  vusbcamera. PassThrough = 'TRUE '.

• Satellite Pro L20 USB ports no longer work

  Hello

  A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.

  Things I've tried so far:

  Reinstall the chipset drivers
  Update the BIOS.
  Ensure USB is enabled in BIOS
  Uninstall and reinstall the USB controllers via the Device Manager.

  

  The USB ports no longer work and I ran out of things to try. Any suggestions?

  Thank you

  Hello

  If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.

• None of my USB ports no longer works

  Original title: activate the usb port

  Suddenly, the usb ports no longer work.

  Used a recoverypoint, but did not help

  Remove all usb ports and new discovered computer and installs but no result.

  There is power on the ports becase that a usb fan works

  What to try?

  Hi JoopSteenhuis,

  Try the methods and check the results below:

  Method 1: Run the patch from the link mentioned below and check if the issue still persistent.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right-click every device under the USB Bus controllers node, and then click Uninstall to remove one at a time.

  f. restart the computer, and then reinstall the USB controllers.

  g. plug in the removable USB device and perform a test to ensure that the problem is solved.

  You can also see the following article for more information:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

   

  I hope this helps.

• USB ports no longer work

  all usb ports no longer work and I tried to fix all the methods have failed and he tells me that all drivers are installed and work properly... not

  all my devices that worked in one of the 3 usb ports. I tried all methods on the 'help' with questions. I get a msg that says that all devices are up to date and working properly but it always starts as "computer does not recognize this device ' click here to solve. I can't solve

  Hello

  You did all the people?

  Try a Place Upgrade or repair Installation. If this does not work, you will need help of a
  real computer store (not the leeks and the glances at a BestBuy or other big box stores) or the system
  Support from the manufacturer.

  This tells you how to access the System Recovery Options and/or use of disks of Vista
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Or you could do a clean install.

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I get message "USB device not recognized", but two USB devices are actually works very well. Poster sometimes Device Manager 'unknown device', then it will disappear and reappear.

  Poster sometimes Device Manager 'unknown device', then it will disappear and reappear with the error message.  Sometimes, I see the message even when there is nothing in the USB port.

  Hi malsnano,

  I see that usb devices do not work on xp. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the issue limited to these usb devices?

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  M odes 2:

  Put the computer in a clean boot state, then check if that helps.

  How to solve the problem by performing a clean boot state:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in step 3: to reset the computer as usual.

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 4.

  You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart the computer and Windows XP will automatically reinstall all USB controllers.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Devices no longer works, usb does not get detected, CD-ROM & CD/DVD-R do not recognize disc

  Original title: devices suddenly stopped working?

  All my devices (that I used a few weeks very well) stopped working.  Help please... I'm trying to upload pictures from my camera to my computer, but my USB is not detected.  My card is not detected.  And my CD-ROM & CD/DVD-R do not recognize the disc.

  Hello

  1. What is the brand and model of the computer?

  2. you receive an error message?

  3. all devices do not work on your computer?

  4. the Device Manager shows all the yellow icons for unknown devices? You have installed all the drivers?

  5. have you made changes on the computer before this problem?

  Method 1:

  You can run the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  You can read the following article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/?kbid=310575

  Method 3:

  You can read the following article.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  See also:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) How to back up and restore the registry in Windows

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

• Satellite M60: USB devices do not work

  Hello...
  I have a Satellite M60 and all USB devices with microphone (webcam, VoIP phone) do not work.

  If someone could help with some suggestions, I would be grateful.

  Hello

  What do you mean by "not working"? The operating system recognizes external USB devices?
  Have you installed the drivers of these external USB devices?
  I also have a webcam and I had to install the drivers provided to use the device.

• Error message receiver: headphones may not be installed correctly and Sennheiser U 320 USB headset no longer works.

  Original title: USB headset not recognized by windows 8

  I have headphones Sennheiser U 320 USB that I got about 6 months before, it worked fine up until this point. The sound no longer plays through the headphones, he just playing through the speakers. I reinstalled my audio drivers and I tried to put the default audio headset in playback devices but the headphones don't even appear. When I right click on the space empty and check see the disconnected devices that they don't even appear. I don't know what to do at this point. At the time where they worked I got a few messages in the status bar system that says my helmet might not be installed correctly, I tried to fix it but didn't know what to do so I swept, then they just stopped working all together.

  There seems to be something weird with the usb it comes spontaneously started working and then when I unplugged and plugged again it does not work.

  Hello

  For a better understanding of the issue, I would need more information on your side.

  1. are you able to connect and use other USB devices on the computer without any problem?

  2. don't the problem occurs when you connect the headphones on another computer in Windows 8?
  3. What is the brand and model of the computer?

  I suggest to uninstall and reinstall the Device Manager USB controllers and check to see if it helps.

  (a) press on the Windows key + R, type devmgmt.msc.

  (b) expand USB controllers, click drivers.

  (c) click on Properties, click on the Uninstall tab.

  (d) click OK.

  (e) restart the computer and it will update automatically pilots.

  Note: You can also install the latest Chipset driver on the computer manufacturer site.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite A210 - 11 c PSAEG: Vista SP1 - USB mouse no longer works

  Hello

  I have an A210 - 11 c (PSAEG) with Vista. A few weeks ago and after installing Vista SP1 my mouse USB optical (wired Logitech V100), began to fail - the background lighting of the mouse turns off and the pointer freezes.
  The first time I used to disconnect, then return to the mouse, which solved the problem.

  Later I had to change the USB port as well, in order to make this work. And finally, since yesterday, the mouse has stopped of works not at all on the laptop. Plug it into a USB port, Vista displays a notice of unknown/a device failed, but not more details.

  Moving the mouse over other PC shows the material is ok - the mouse is recognized and work.
  I also tried to connect other USB devices (an MP3 player), which seems to work fine as well.

  So, it doesn't seem to be problem USB Hub.

  Everyone knows about similar problems after Vista SP1?

  Cheers, Ivo Kolev

  Hello

  > Is - anyone experienced similar problems after Vista SP1?
  From my experience, not all devices, drivers, etc. are compatible with the Vista SP1.
  I read many articles about the teething problems

  Have you noticed the same thing without SP1?

  However, I would recommend this;
  Go to Device Manager and remove the USB controllers and USB hubs.
  Reboot the laptop. While Vista again recognizes the USB ports.

  After this short intervention, try connecting the mouse still once

• PowerEdge 2850 message error, no display, usb devices do not work and all readers are off (a little)

  Hello! I'm here in the dell community because I'm having an error with a PowerEdge 2850 server. When I boot it all seems to work, but inspection closer both blue and yellow led on the front is off. All devices (such as a keyboard) will not turn on. Supplies seems to work perfectly well with the error led out of power and both of the Green led on the power supply on. The drives at the front lights up but then after 2 seconds the led for every hard drive goes off and then when you reconnect the drives it will be on for 2 seconds then turns off.

  I tried:

  Reset all RAM chips and CPU in the case

  Replugin all hard drives from the server

  I tried multiple monitors

  has tried just using the power supply instead of the power brick or a surge protector

  and tried to run it only out of a raid, everything ends up in the same result

  I have no idea what to do so im just going to ask the community of dell. Thank you!

  Hello.

  What is the error specific are you? Try the system at least to the POST with the following components:

  • System Board
  • Processor
  • A bar of memory in DIMM1-A or B-DIMM1
  • Power supply
  • Riser
  • Control Panel and bottom of basket (necessary only when the last power state was off. Ensure that all USB devices, including the keyboard are disconnected.

• Satellite P10 - USB port no longer work

  Hello

  I have a huge problem with my computer usb portable-ports(satellite p10).

  After that I tried to connect my hard drive external with my laptop, all of my devices usb is lost. I tried to update all the drivers for the chipset and usb. I even updated my bios, but without success.

  Even other usb devices as my camera and mp3 player not recognized by the computer system. But it seems that the usb port still have power because my mp3 player display a reaction even without battery power.

  I hope that someone knows a solution for this problem.

  Thank you

  Hello

  I don't know, but if the USB port is bad there is also a no power supply possible. In my opinion, the mp3 player shows a reaction because the device detects a connection to the USB port.

  In my opinion, you should contact the Service of your country partner and let check the device. I don t know how old your unit and if the warranty is still valid.

  Good bye

• Several devices no longer work correctly after Windows 7 upgrade

  Hello

  Upgraded from vista ultimate to windows 7 problems with my eject button and other buttons on my laptop. They no longer work. Storage of mass and those problems?

  Please help me to get my laptop working again as I am not able to use my recovery disks that the laptop does not recognize the disc 2 so I'm stuck with Windows 7. The buttons on the phone IE, eject, s1, s2 and volume do not work and I have a mass storage controller problem it says no driver?. I tried and tried to find one, but I can't. I asked Sony for the replacement of the recovery disks and they want forty quid and I argued its their fault the disks didn't copy correctly in the first place so they should give them for free, but they do not really give a xxxx.  I'm not very high on the ins and outs of computers so if you are kind enough to help me please keep in terms simple lol. Many thanks in advance Jeanette

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > looking for the latest Windows 7 drivers > download/install the.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• USB ports no longer work after upgrading Windows 8.1

  I have upgraded to windows 8.1 and from that moment, my USB ports don't work anymore. tried to check them, but does not (uninstall,...);

  I have a HP Pavilion 15-B050EB; I can't find the drivers for the USB ports on the HP site. can someone help me?

  called them; very friendly guy, but the only solution is a total recovery.

  which means a working day to do backups and re - install software programs...

  Thanks for your kind help anyway!

• USB device does not work

  Original title: I can not use my USB, this legend is displayed: "Please insert a device", what can I do?

  It is installed as always, but when I want to use it or open it, it says "screwed a disco en Unidad extractable: (G)" Please help!

  Hello

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the USB device?

  3 is the issue limited to any particular device?

  Please follow the methods and mark the question below:

  Method 1:

  Tips for solving problems of USB devices:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: This also applies to the Windows 7 operating system.

  Method 2:

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Uninstall and reinstall all USB controllers and check.

  a. press the Windows key + R simultaneously to open run, type devmgmt.msc and click OK.

  b. in the Device Manager, double-click Universal Serial Bus controllers to expand and right-click on each of the controllers and click Uninstall.

  c. restart the computer and install USB controllers in Device Manager right click on Universal Serial Bus controllers and click on Search the hardware changes.

  I hope this helps.