USB 3.0 on the Pavilion m9360

Similar Questions

• Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

  I removed a work card TP-Link to a Pavilion a1300a XP Home PC network to put in my Pavilion p6340a Win 7 (64-bit) Home Prem PC.

  Download and install the current drivers of TP-Link.
  Installed everything well and the adapter can be seen in sub "Change adapter settings" in network and sharing Center and shows as working properly in Device Manager, but it is not recognized as a network within the network and sharing Center.

  Under "Manage wireless networks'" nothing appears, if I then click on Add"then manually create network profile" "I then get an informative message '" an unexpected error occurred'. "

  Suspect a problem with the NETWORK card, I uninstalled it and its drivers and tried to install a USB wireless adapter with the same exact result and the error message. It seems that there must be an OS problem or something stopping the wireless to work. USB adapter both NIC work properly when installed on the former Pavilion a1300a XP Home PC. NETWORK card and USB adapter are the current drivers for Win7.

  All the ideas it driving me crazy. A simple 5 minutes on any other PC task turned into many.many hours without solution.

  After many hours of uninstall re install & try everything under the Sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times was the final fix

  1. Uninstall NETWORK card and USB drivers and devices.
  2. Then uninstall the AntiVirus (in this case AVG Internet Security)
  3. Reinstall the NETWORK card and drivers
  4. Reinstall AntiVirus

  Tried the USB adapter as well so that the antivirus has been uninstalled and installed no. with problems.

  Everything works very well.

• HP Pavilion p7-1451: when I try to start my hp Pavilion p7-1451 from a USB I just get the HP Logo

  Recently, I upgraded my OS to Windows 10 and follow the procedure to create a system backup and recover and restore the Flash Drive. When I try to start my HP Pavilion p7-1451 from a USB I just get the HP Logo. Do I need to change the settings on the HP?

  Use the esc key when you see the HP logo, it should give you a list of startup, and then press F9 to get a list of boot devices, then choose your USB key from this list and press ENTER.

• Can't boot from USB or DVD. HP Pavilion g6 - 2257sr

  My new laptop HP Pavilion g6 - 2257sr doesn't let me boot from USB device.

  The laptop computer startup, I pressed ESC and F10. Then I put in place the order of startup UFEI - USB-device / DVD / OS selector.

  I use the official Windows 7 disc and several own USB devices with bootable images.

  But rebboting use OS hard drive provided.

  Help, please. I want to delete the current operating system on my laptop.

  Hello:

  I have a set of recovery first disks before continuing.

  To start the PC, you must go into the BIOS and enable the legacy mode.

  Then you should be able to boot from another device.

• My usb ports on my HP Pavilion dv7-6b56nr Entertainment Notebook PC

  My usb ports on my HP Pavilion dv7-6b56nr Entertainment Notebook PC do not work.    Windows 7 Home Premium 64 bit.  Product # A1T84UA.  No matter what I do, I can't get to work.  When I go into the Device Manager it shows a conflict.  When I try to update the drivers, he says that they are up-to-date.  I even tried to do a full system recovery, and if it was not for an image that I saved my computer would become a paper weight.  I am grateful, that he's back running.

  Hello

  Please install driver chipset for your machine from this link (a 2nd), this will fix a few things for you:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  Kind regards.

• Pavilion 15 n-246se: usb port 3 for hp Pavilion 15 n-246se

  I have hp pavilion 15 n-246se and I tried hard to set the usb port 3, but I can't... it worked before, but now it no longer works

  Thanks in advance

  Hi @sohaibadel,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-n246se and problems with USB 3.0 does not properly. First of all, you need to remove all USB devices.

  In Device Manager uninstall everything that is listed in the USB devices. Restart the computer after the uninstall, it must be reinstalled automatically. Then put in the USB devices and it should update all drivers.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  I would like to know how this happens.

  Thank you.

• USB 3.0 card desktop Pavilion Elite HPE - 390t CTO?

  Is there a HP (or other) 3.0 card USB compatible with the Pavilion Elite HPE - 390 t CTO desktop PC?

  Thank you.

  Hello

  Your product, it seems that you should have enough space to expand.

  I suggest you find a USB 3.0 PCIe card to any provider of computer frame.  Here are the instructions on installing a PCIe card (you can start with step 2).

• How to replace the motherboard on the Pavilion p6550z

  How to replace the motherboard on the Pavilion p6550z

  Depending on where you have acquired your replacement Board Aloe, it may be 'tattooed' with the name of the model, product number and the serial number of your computer.

  Use these HP guides as needed.

  (1) unplug the computer and hold power in 5 to 10 seconds.

  (2) on the side of the cover (see guides above)

  (3) place the case on the closed side with the open side facing upwards

  (4) take a photograph detailed inside your computer... take more if necessary

  (5) unscrew the restraint of external expansion card (see guides above)

  (6) disconnect the power supply connections to the motherboard and all devices... tag and/or take more pictures

  (7) remove the... rock expansion cards cards gently just pulling up

  (8) unplug data cables from the motherboard and readers... tag and/or take more pictures

  (9) disconnect remaining USB switch, connections etc... once again, the label or take more pictures

  (10) remove all motherboard screws on the case and remove the motherboard

  (11) reverse the steps, starting with #10 and working #1

  Good luck

• Satellite R630 with USB 3.0 to the Portugal?

  Does anyone know if possible to buy the Satellite R630 with s * USB * 3.0* to the Portugal?

  When it will start coming in the comercial range?

  The actual configuration is:

  x 3 * USB2.0*, 1 porta combo eSATA / USB sleep-and-Charge com, SD Card

  I'm just wayting for the feature to buy my new thoshiba.

  Oficial new Toshiba:
  http://PT.computers.Toshiba-Europe.com/innovation/JSP/news.do?service=PT &; Year = None & ID = Satellite_R630

  Thank you for your help.

  RB

  Hello

  As far as I know the Satellite R630 supports USB 2.0
  Only a few models support USB 3.0, but this should be replaced in the future.
  Of my knowledge that the Portege R700 supports a docking connector which allows you to use a USB 3.0 controller.

  Seems that you have to wait a bit if you want a laptop with a USB 3.0
  But I think it's worse to wait because a maximum of 3 USB, 0-Port flow 2.5 times the speed of a USB 2.0 Port.

  Of course, you will need to connect a USB device to USB 3.0 to get this performance

  Welcome them

• Is there a risk of overloading a pencil Apple via a USB, rather than in the iPad Pro?

  I just bought an iPad Pro and the pencil of Apple. I understand that the pencil can be loaded without using the iPad. How much time will it take to receive a full charge and is there a risk on reload. Can I plug to charge all night so I have a full load to shoot during the day? Unfortunately, I found no information on this. The booklet that came with it didn't cover this issue.

  I appreciate any help I can get in this regard.

  Is there a risk of overloading a pencil Apple via a USB, rather than in the iPad Pro?

  Lol of course not.

  No company could design a product that would allow it to be overloaded.

• DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

  Greetings HP Forum,

  Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

  NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

  Thanks in advance for your help... I greatly appreciate it!

  See you soon!

  Wes

  It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• failed to install for photosmart b109 all-in-one a - m. has said usb not connected to the computer

  I replaced Vista with a new version of windows 7 64-bit and cannot get my HP Photosmart B109 all-in-one a - m at the end of the installation I downloaded from the HP site. I uninstalled this printer as suggested before attempting the download. He gets to the part where you plug in the power and then the lights on the printer the computer tells me that my USB key is not plugged into it. I tried changing USB website and tested the USB connections and ensure that they work on the computer, but still the same response. The program then continues to stay on the installation of the final software and never complete. Talked with a local tech guy who suggested that you contact because he has no idea.

  Hi, thanks for the suggestion. However, I did not upgrade but remove vista altogether. I found the problem after a lot of grief and research - there was a cord that had fallen on the back of the library that was not plugged in!

• HP Envy 15 - q47002 i7: laptop overheating, does not recognize any USB. Even in the Bios.

  Hello

  I bought this product last year, so my warranty wore off.

  My laptop is overheating and it is very slow at this point (even videos are not working well). I tried to clean it up but it was without result.  I want the game and computationally intensive applications, but I'm afraid of the motherboard or hard drive failure.

  Now to the point. I can't install the new OS, any OS because this laptop doesn't have a DVD player and it doesn't recognize any usb 2.0 or 3.0.  I tried to change the options in the Bios and I tried to uninstall and install the drivers (they are up to date).

  What should I do? I can't install a new system because of this problem, and I can't use anything more demanding than youtube which is really annoying since this laptop has good specifications.

  I am currently running Windows 8.1 which I got when I made a purchase.

  I hope someone answers!

  Thank you.

  EDIT: In the Device Manager it says device not installed with yellow exclamation point. By Usb or ext hdd. And it will not find the device-specific drivers. As I never need them on another PC or laptop.

  Hi @HarunC,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP ENVY 15 t-4710HQ i7 Quad Core Notebook and questions with serveral fuctions works do not. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  With the USB not recognized by Windows.  Here is a link to solve the USB connections.

  I would like to uninstall everything cited first in the list of universal serial bus controllers.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link if you need to download drivers USB Intel for Windows. This is a utility to update.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• The Pavilion g6-2123us left hinge pulling the bezel!

  Hello. My daughter about 2-3 years-old HP Pavilion g6-2123us has a problem with the left hinge. The support is pulling loose from the lower left corner of the lcd screen and the cracking of the collar. Did some research, it seems similar to problems left hinge that has occurred with the HP DV 9000 and the Pavilion dv7-4070us series.

  While the unit was under warranty, we sent it in for repair of hinge, which was covered - so this is the second time in the life of the laptop a two-or-three-year-old who broke the hinges. Needless to say, I'm not impressed by the quality of this laptop case/hinges. (It works well otherwise!). Although the warranty has expired, I hope that customer service can make something low-cost or free given that this seems to be a serious design flaw. (I have some experience with electronic repair and I saw coins on ebay, etc., but I really hope HP can intervene at the plate!)

  Thank you! Anyone has the info / similar problems with this model?

  Hello kgallagher

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.