USB stick does not support

Similar Questions

• USB stick does not go to the desktop using OS10.11.3

  USB drive connected, but does not appear on the desktop. Have already made external drives is checked.

  Try this first:

  'Reset the controller of system of management (SMC) on your Mac - Apple Support

  If this does not work, run disk utility and then plug the USB key. It appears in the left pane of the window? If so, select the drive and try to fix it. Then look in the upper part of the program disc Utiilty for the mount button and try to mount it.

  If she does not appear in disk utilities or if it does but the repair will not let you mount on the desktop, try to use it on another computer. The drive may be dead - they are actually more fragile than you think. If you can not read it on any computer, but you can see it in the disc utilities you can try to erase. However for me, when a broken thumb disc I throw it.

• X120e - yellow USB port does not support suspend or Hibernate

  I have two options enabled in the BIOS, but the yellow charge USB port when the laptop is awake.  I use the latest BIOS and drivers.  Does anyone else have this problem?

  It is enabled in power manager. I just read the help dialog here and it does not mention that it will only charge when connected via AC what kind of defeats the purpose for me. I was hoping I could recharge my phone off of the battery of the x120e, while he was in hibernation.

  I guess that "always on USB" isn't exactly "Always on" Oh well

• USB stick does not (need to format, cannot format)

  Yesterday I tried to install Kali on a USB key. After the installation, however, the computer does not in it. In Windows, I tried to access it but it says "You must format the disk before using it." So I clicked on the format, but it said "Windows couldn't complete the format". After this, when I try to access the USB, it says "insert a disc into _. I tried to reinstall the drivers and disk management (it does not even detect the USB). What should I do?

  After a few hours of an atrocious, I came across the answer! Click computer-> manage-> disk-> In the LOWER SECTION, the volume of your flash drive will be visible and he'll say no 'allocated' (it will not appear at the top)-> right click and select "New Simple Volume" just and -> spam the button next to the time. : D

• USB stick does not download software for camera and other new devices - HP Desktop G5418uk

  Product:-HP Desktop G5418uk

  Operating system:-Windows 7

  Error message: - install the software device driver - followed - software device driver was not installed, success no driver found.

  I bought a new Creative Plug and play WebCam which I couldn't work even if it worked on desktop computer stores. I returned it and the store changed to a WebCam from Microsoft, but it is the same thing. Since then I tried to use 2 separate drives pen and drivers will not load low. Existing plug & play such as my external hard drive works as usual, so the problem has increased for new material. Don't know how many times, but it happened during 6 months. I also managed to install the camera on my old desktop with no problems. Can anyone give any help would be highly appreciated.

  No yellow or red indicator appearing with Device Manager need to be addressed first. The fix requires that nothing is plugged into the USB ports.  You can start here.

• USB stick does not appear on the desktop

  With the help of Mavericks OSX, I just format a USB Flash drive; but the Flash drive icon appears on the desktop.  What should I do to get the icon to display on the desktop?  (I formatted a formerly DiskWarrior USB Flash Drive).

  What format did you use? Check the Finder/preferences/general to make sure that the hard drives and external drives are checked.

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• Does not support the Lenovo S650 Usb otg cable

  I bought the new lenovo S650 and I connect the usb otg cable for read my USB but it does not support? Why? Please help me

  S650 hardware does not support the OTG. Regardless of the cable.

  The micro-USB port to charge the phone only.

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

• Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

  Original title: Sony Hanycam HC20

  I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

  using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

  I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

  as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

  There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

  The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
  You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.

• Windows 8 does not support the prolific usb to serial driver

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry