used to scan

Similar Questions

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• I need the scanner for hp officejet 4215 for the use of scan software

  I need the scanner software for hp officejet 4215 for the use of scan and when I press the scan button on the printer know any software to scan function.

  Hello

  Please use the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=351106

  Kind regards.

• Using the scan Mode 9411 cRIO-9074

  Hello

  I use an entrance Module differential differential NI9411 under cRIO-9074 with scan Mode, but I noticed that some problems are present.

  My application needs two encoder and we choose two incremental encoders with 1024pulses/rev. I have configured the NI9411 quadrature Mode, so I can read the position and speed of the encoder. Each shaft turn at different speeds.

  One of them can turn 4.6 rad/s as a maximum speed, while the other hit it up to 402 rad/s. Then, the configuration of the module input filter is set to 1microsed, the time base speed 32768 microseconds and the disabled index mode. These values make for a correct reading? The cRIO scanning speed is set to 1ms.

  On the other hand, watching the tutorials or (http://zone.ni.com/devzone/eda/tut/p/id/7109), that the degree of rotation depends on the encoding type, what type of encoding is used in Scan Mode? X 4?

  Using System Manager OR distributed, one of the encoders to read impulses sometimes sporadic (up to 2 digits) Although the encoder is stopped. However, the other bed is always 0. It seems that the encoder is broken, isn´t it?

  Thanks in advance for your comments

  Hi Juancar,

  I think that the values are suitable. The issue of reading 0 is explained in this KB:

  http://digital.NI.com/public.nsf/allkb/C9088DFDF803CD8B862575F3007C40FD?OpenDocument

  In addition, according to this document:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7338

  decoding type must be set to X 4.

  I hope this helps! Suerte con ello.

  Jesus

• Why my scan used to scan a document in color so I can change it?

  Why used my scan scan a color document in a file that I can edit?

  Hello

  To edit a scanned document, you may need to install a program. To learn more about editing a scanned document, I suggest you to check the below link.

  Scan and edit a document

  http://Office.Microsoft.com/en-us/Word-Help/scan-and-edit-a-document-HA010254879.aspx

• OfficeJet J4660 all-in-One on Windows Server 2003 R2 - cannot use the scan and fax functionality

  Hello everyone,

  I recently purchased the Officejet J4660 AIO.  I had to install on our Windows Server 2003 R2 (with all latest updates), being present on the CD of driver for Win XP, I had to download the latest driver (OJJ4600_Corporate_ENU_10 - 55.8 MB) from the HP site.  During installation, ONLY the printer driver has been installed.  I can't use the SCAN function or the FAX software.  In fact, the icons for these two programs not created in the HP program group.  No error message appeared well while installing.

  All the world was a program similar and been able to get a work around for this?  I would like to use AIO printer that I bought, not only on the side of impression of it.

  Any help will be much appreciated.

  Thank you.

  Salim

  I think that the Acquisition of Image Windows (WIA) service is disabled in your system. Unlike Windows XP or Vista, in most Windows Server systems, this service is disabled by default. You can activate it in this way:

  1. right click on my computer and select manage.

  2. Select "Applications and Services-> Services";

  3. find Windows Image Acquisition (WIA), right click and select Properties.

  4. Select "auto" in the "Startup Type" list box in the "Général" tab

  5. in the situation 'Services', click 'start '.

• Photosmart B209a can you overried printer function? use the scan only?

  I have the Photosmart Plus B209a model installed print head is not intended for this printer, or is damaged. Refer to the Doc of the printer. Now, I have done this and cleaned ect. So, assuming that is damaged. I called to get this part and OMG! I might as well buy a new one! $85.00 and I did. My question is can I substitute the information of the printer and use the scan function again?   Thanks for any help!  Michael

  Unfortunately, you can not.  If the printer is in an error state, it locks you out of all the other functions of the printer.  I'm sorry.

• Scanner (Officejet 7500) cannot find the computer when you use shortcuts scan to printer

  When you choose Scan to PDF, e-mail, etc., by using the scanning on the 7500 buttons it allows me to select the computer on the network (each with all of the latest drivers and software loaded). However when about to the scanner and then says the computer is not found (whatever the) despite them being on and ready. Scanning by any other method of the Mac works. Automator shortcuts work very well during the tests, but they do not seem to get initiated by the scanner for scanning form of initiation of the printer itself.

  Research on the support site HP and conclusion - a 'connection error' or "Computer no. detected" Error Message displays when trying to Scan from the printer control panel - as a subject gives PC solutions, but nothing for Mac. And so here I am. Help!

  JKB

  The next thing to check is that "HP Device Monitor" is running.  This background process is responsible for detecting the keys for scanning applications.  If you open the activity monitor (located in/Applications/Utilities) you should see this class as one of the running processes.

  It may be generally preferable for you to perform an uninstall and reinstall the HP software.  You will find in Applications/Hewlett-Packard HP Uninstaller.  Use this utility to remove the old software.  I recommend that you download and install the latest version of the software for your 7500 here: http://tinyurl.com/4voly2d.

  Hope this helps,

• How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

  How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

  All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

  Canon: http://www.usa.canon.com/cusa/consumer

  Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

  J W Stuart: http://www.pagestart.com

• When you use Windows scanning how to scan multiple pages on the same thread of document? He seems to want to make a separate file for each page.

  I have thhink the question says it all. On my previous PC, when I scanned a page, it asks if you want another scan and if you did, they would all wind upward in the same folder?

  You use the scanning software provided by your scanner/printer all in one

• After mac os update and software reinstall now unable to use the scan function

  Hello

  I never thought I had to post on one of them, but it really made me. I have a Macbook and stupidly thought that I would update to the mavericks os 10.9 the other day.

  I continued to be able to print once the update, but it was impossible to use the scan function. So, I removed the printer and the drivers and downloaded the new drivers which would have been compatible with os x 10.9. When I went to reinstall the printer, he couldn't locate it on the list of "available printers" - I connect using wi - fi connection at home.

  The only way I could connect the printer was installed manually by entering the ip address. It was found and I print now, so I don't think there is nothing wrong with the connectivity, but a warning when you do this that says scan function does not work, and of course the scan option is simply not there.

  Thought I have would bypass this using analysis of e-mail on the printer. It seemed to work fine, but when I received the email there was no attachment.

  My husband is now scanning these documents to his computer (a pc) and emailing for me - is not ideal.

  Any ideas on how I can fix this?

  Thank you

  Annie

  Hi Annie,.

  Here is a picture of a printer, USB cable,

  

  Now that I know what printer we work with, I have another idea. On the front screen of the printer please press the wireless icon. There are 4 icons in the upper part, the wireless is the second from the left. In the Menu arrow until settings wireless advanced. I would like to disable IPV6, arrow down to IPV6, and then select OFF.

  I saw the IPV6 interferes with the Hello Protocol several times, often time turning off this feature will solve the problem and allow the Mac to see the printer on the network. Once IPV6 is disabled try to add the printer again.

  Please let me know if this solves the problem, I am eager to see this solved and you get printing and scanning of your own computer.

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• Photosmart 5524: Sweep ends only when go HP printer Asst. ; used to scan automatically

  Just for the last 2 weeks or so, when I go to scan a document to my computer with a Wi - Fi, the message ' computer does not, check network connection is displayed. I have virtue to solve the problem and the analysis, after going to the Printer Wizard, manage the scan of the computer, and then disable and then allowing once again the analysis to the action of the computer. Why is this and I go back to auto scan the prinetr again? Is this something to do with the recent Microsoft updates?

  Hey @Palmyra3,

  Welcome to the Forums of HP Support!
  
  I understand that you are not able to use systematically the "computer scan" function on your HP Photosmart 5524 e-all-in-one printer to your computer Windows 8.1. I would like to help you today with this problem of communication of intermittent scanning. Now, because you are able to go in and manually enable the option 'analysis of the computer' and it works fine (temporarily) we know that your software and drivers are correctly installed and that you have no such conflict of wireless communication. I think a background on your computer or a firewall program can cause the conflict of communication bidirectional scan.

  To solve this problem today can I please have you click here. When the page opens you will be taken to the paper Support HP for a computer"not found" or an error message "Connection error" message.

  The steps that I want you to pass by are going to be a little out of order that the document States. Please run through:

  Solution 5: Search for critical updates, hotfixes, and firmware:

  The only available for your printer update is update the firmware of the printer HP Photosmart 5520. If you click on the link provided you can upgrade the firmware for your printer and test again the front scan function.

  Solution 6: uninstall the software, run Disk Cleanup, turn off background programs, configure the firewall and then reinstall the software:
  

  Please start by step 4: turn off programs running in the background and again test the scan function. If everything works fine now that a program running on your computer background is at the origin of the conflict. You can leave your disabled if you want as the background programs. Programs on your computer will work fine, they just used automatically running in the background of your computer.

  If the problem persists, please browse: second step: delete unnecessary files and folders with disk cleanup, step 3: restart the computer, and fifth stage: Configure the firewall under Solution 6

  If the issue still persists, as the race through Solution 2: download a tool to fix the problem automatically

  Please let me know if the steps I have provided resolve your problem of communication of scan. Good luck!

• Used to scan HP Photosmart connected to a MAC.

  Series of HP Photosmart C4400 1

  both iMac and MacBook Pro under OS X 10.6.8

  Habit of scanning, scanner section does not register in the system, preferences/print & fax

  

  Download and install this: support.apple.com/kb/DL907

  Use Image Capture to your Applications folder to scan.

• 5610 all-in-one - black thick top of line down on the pages scanned using the scan feeder tray ONLY

  Using HP Officejet 5610 all-in-one I've had for years and maybe 6 months ago, I noticed that anything that is analyzed by the load plate (if you need to scan a bunch of pages without having to analyze each page individually between analyses what is tedious that need constant attention) has this thick black line goes up and down on the middle left of THE pages scanned. Honestly, it looks really bad like if there is something hidden in this terrible line through the process of moving the paper through the feeder, BUT the original is just fine without damage.

  If I scan just a page by placing the document on the scanner glass, and then NO matter whatsoever.

  100% reproducible every time.

  So I know that it has nothing to do with the glass (which is clean), but only when the scanned document must pass through.

  Checked the forums for similar problem and found no exact match.

  I imagine that an expert out there knows the answer to that high hand. IF you could speak up, I would appreciate it.

  I THOUGHT ABOUT IT!

  I read another post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8500A-plus-vertical-black-lines-only-when/m-p/1391261/highlight/true#M30268

  who is mentioned on opening the ADF cover. Well I opened the whole Assembly, having absolutely NO idea how it all works, and I found a 1 "x 8.5" thick mirror (for lack of a better term) who had what looked like white paint on it to the place where the pages were probably getting the black line. I scratched, retested and the question was gonzo - that's all!

  Then my wife just told me that she thinks that she knew what the problem was all along. She had put on a page and it had not dried, and she tried to put it in the charger to make a copy. She just thought that we were going to replace the printer even when and if ever, let me know. During this time it was me mad for months. What are you laughing at me? This all-in-one works very well for years - replace without good reason, must learn a new product, get new cartridges, out the same old, same old, NO way. If it is not broke, do not replace it!

  Detective Conan.

• HP Photosmart 5510d: series HP photosmart 5510d used to scanning for Mac

  Unable to get HP Photosmart 5510d scanner the computer no more.  I uninstalled it, downloaded a new driver, tried to get going again and again, it does not analyze.

  Hello @Biebs and welcome to the Forums of HP, I hope you enjoy your experience!

  I understand that you are having problems scanning Mac.  I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend you to reinstall HP Photosmart 5510 e - All - in - One printer full feature software and drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!