V6120US not Boot lights blinking...

Similar Questions

• Desktop is not boots up

  So, I have a rather unusual type of a problem. My pc was working fine until yesterday when I stopped him and wanted to go back, he na not green light blinked, but it does not start. Then after a while I turned on it and he gave me 'beeps 9, REDS', he gave me 5 beeps before, but I fixed that by simply cleaning the inner parts, etc. and it went well, now, I did the same thing, plucked the RAM out and put new. Power, and it was fine.

  So today, when I start my PC, it gives me the same problem, I remove the RAM, put again and its fine :/? Like WTH a circus happens someone help me please...

  PC is hp dc 7700 small form factor.

  Hello

  This document and the information is available on the web from HP:

  HP Compaq dc7700 desktop PC - beeps nine times during startup of the computer

  Question

• HP 5400 printer light blinks, but does not print

  HP 5400 printer light blinks, but does not print

  Hello theguttu,

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• TX2517ca, will not start - blue LED - Num Lock & Lock lights blink.

  laptop just decided NOT to start a day... I can hear the fan and HARD drive activity minimal. I tried the Hard reset as directed by HP and removed the battery etc...  lights blink at the exact same time, stay on for 1 second and off for 3 seconds and then Flash simultaneously again and does not stop until I pull the power, there is no clicking, grinding, beep, nothing, nothing on the screen at all. The rest of the lighted buttons are lit in blue.

  FYI, I am a 15... computer technician home based at this time. so I pulled the memory, cleaned, air-dried to compress (1 GB & 2 GB), 2 of them and blue on the slots and reinstall even by only 1 at the time, no change, same result, flashing of the LED. Then I pulled just the hard disk connected to another machine as an external HARD drive, it works fine, I see the C drive and the disc of recovery without any problem. so at this point, I just shot from the card pile and leave for a while see if we can clear the BIOS/CMOS (I was wondering if the software is stuck in hibernation or sleep setting and when turn is only back to the similar condition, but represent no display on the screen...) so far points to CPU I think. Then after having replaced existing hard drive and try to start if it does not work, I have a blank hard drive to work I can insert to the hell of it... stay tuned...

  Also system Oh, hair Immaculate, not collected or dust in the ports of fan etc...

  Hello
  Click on the link below:
  LED white screen error codes

• P1102w: P1102w - orange light blinking - won't initialize

  My printer won't boot and the orange light blinks. I tried to uninstall and reinstall the printer driver and firmware.  It also shows 'it can run out of toner' when I know that it is not. Cannot print page of test or anything else that he does not communicate with the computer. Help!

  Hey @cbloom57,

  Welcome to the Forums of HP Support!

  I understand that you have an orange light flashing on your Laserjet P1102w printer range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute. If you still see a flashing light orange, then the printer is more likely to have a recoverable hardware problem. This document explains How to resolve error lights on the printer.

  Please let me know the results after following the above. If you are able to clear the blinking light, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Satellite A60 Pro is not booting

  Hello

  I hope someone here can help you. I know that this laptop is old ages, but it's the only one my aunt and she would that he repaired if possible.

  Basically, the question is this.
  You can start the laptop, all the normal lights light up and the screen with the Toshiba logo and 4 icons at the bottom and then... nothing.

  He's sitting there for centuries, showing the logo and nothing more.
  You can turn it off by holding the power button down and turn it back on again, same thing.
  I did this without the disc without the optical drive and HARD. No difference.

  The worst part, without a keyboard input seems to be accepted. I help ESC, F1 and F12 on separate occasions but no change - goes to the screen of tosh, no other movement.

  HARD drive and optical drive turn up, as in they make noise and you can feel their displacement.

  I'm at a loss and need help please!

  Phill

  Hello

  If the laptop is unable to pass the Toshiba start screen, then this would mean that a serious hardware problem has been detected.
  During the startup process, POST (power on self-test) is running (for the POST, you see the Toshiba start screen) and the material is checked. If that fails, the laptop would not boot the system.

  I guess something is wrong with the motherboard. You can see the modules of memory, but in the case where the modules are ok, the mobo may be the troublemaker.

• C55-b860 satellite is not booting

  Hi all

  I have a Satellite laptop c55, b860 which is not booting unfortunately. I disassembled it and deleted all the components that are connected to the MB, including hard drive, keyboard, and touchpad and also changed ram, but still the laptop does not start. As soon as I connect the power (with no hard drive attached), I hear a little gurgling noise. Not even the small hard drive is lighting up so it seems that the problem is with the MB. However, I'm not sure if it's the power supply. Can anyone give some advice on this? or maybe experienced something similar? Thank you

  Any comment please?

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

• CQ61-312SA: Presario CQ61 does not boot, black screen.

  In setting in motion:

  • LEDs LED power supply front and button cases NIP
  • Wireless LED lights
  • Above the touchpad LED lights continuously
  • LEDS near caps lock and above paved digital flash streaming
  • No sign of drive activity, no fan noise, the screen remains black.

  Looks like it is not booting in the BIOS.

  However, I tried:

  • Remove the battery, button to power down etc.
  • Remove each RAM module and Exchange.
  • Remove the HARD drive

  NB symptoms are the same when the power supply plugged in or not.

  I believe that the flashing LEDs are important but I the only references I can find are telling me to contact the HP Support.

  Can anyone tell if this is likely to be a failure of a repairable component.

  I was hoping to identify the component that prevents the laptop to even start the BIOS but I guess I'll have to just it's bin.

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• Power light blinking XPS 8900

  I bought my XPS8900 a few weeks ago and immediately upgraded the memory up to 32 GB.

  Everything worked fine, but then I decided to upgrade the video card to an EVGA GeForce GTX970 SSC.

  This card requires a 6 and a power connector 8 pin that does not provide the power supply Dell stock. So rather that to return the video card, I have improved the power supply to a Corsair CX750M, I've read that other XPS8900 users have had success with this machine.

  As others have pointed out, this PSU is a tight fit, but I could get installed it. As soon as I turned on, my trouble started.

  The case and CPU fans spin, I hear the rotation of the drive upward, and I can open and close the dvd tray. So I know that the power supply provides at least a power. But I get no video, and on the top of the box, the power LED flashes amber model.

  I tried to go back to the video card and power supply dell stock, but still have exactly the same problem.

  I also tried unplugging the power cable and power for 30 seconds button. But still, the power light flashes orange model.

  I know there is no beep codes for the 8900 XPS and the sequence of flashing orange light power is used to diagnose the problem, but I was not able to locate any reference to indicate trends.

  The power light blinks a 2-7 model and repeats.

  Anyone know what this means?

  Follow-up:

  I had ripped all with no luck. Well, everything except the improved memory. He had worked, so I don't think that it would be necessary to remove it. But I was wrong.

  I went back to the memory of stock and the blinking orange light problem disappeared!

  Then I reinstalled the new memory, and it worked too!

  So I guess it was just that the memory should be seen.

  Not sure if the model of 2-7 means 'Question' memory, but this would be my guess.

  Since the 8900 XPS does not support beep codes, I hope that Dell will eventually publish what mean flashing light patterns.

• How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  There is a Snow Leopard update that would probably help.  It's called 10.6.8 Combo update.  Download and apply.  Then discover iTunes.

  https://support.Apple.com/kb/dl1399?locale=en_GB there is also a supplement that should also be downloaded.

  http://support.Apple.com/kb/DL1429

• Satellite A200 - 19L can not boot from the CD

  Hi guys,.

  I'm glad I found this forum site, I pretty well hope to find a solution here.

  Well, this problem is not very complicated, in fact my DVD player (model TS-L632) is not read more, so much so I decided to change with a new one, but it is not the same model as the original drive.
  It is the case of the generic DVD player really.

  Now when I inserted my recovery disk or any bootable disk is not booting the CD, and when I press F12 for I can't find any CD/DVD drive, but running in Windows I can't find the DVD player and it can read any CD priority boot normally.

  Just having the problem while booting from CD.
  I thought that maybe there is no security for this model that locked some hardware.
  So please guys want to help me how to understand it,

  any help would be greatly appreciated.

  Thank you

  > When I press F12 for boot priority I can't find any CD/DVD drive, but running in Windows I can find the DVD player and it can normally read any CD.

  The whole story seems really strange to me
  If you access the BIOS, you can see the details of the CD/DVD drive? The drive is recognized properly?

  If not then I guess that the STRANGE inserted is not totally compatible due to different master/slave/c-salt settings.

  > but running in Windows I can find the DVD player and it can normally read any CD
  It s also strange to me so that the CD/DVD drive appears in Device Manager even if the CD/DVD drive Startup menu option does not appear.

  But first check the BIOS