Validation failure message showed twice

Similar Questions

• Third twice repeated failure message

  Hello

  I've been looking and looking for answers on this, but obviously there is something I don't understand.

  I have a quiz with 1 short answer question.  I allowed the user to have 4 attempts to question.  I chose to have 3 failure messages (the maximum that seems to be available) that I customized.  My problem is that third failure message is repeated twice and I can't seem to find a way to stop him from doing this.  Here's what happens:

  1. the user fills out wrong answer, presses present - #1 failure is displayed

  2. the user fills out wrong answer, presses present - #2 failure is displayed

  3. the user fills out wrong answer, presses present - #3 failure is displayed

  4. the user fills out the wrong answers, presses present - #3 failure to appear again.

  Is there a way to customize a fourth failure message?  I tried the last attempt on but that only runs after that failure #3 appears for the second time.

  If I need to write a tip action to bring up my own failure messages then it is fine.  But how is that possible?  I can't find how to store the number of attempts at a variable so that I can display appropriate messages.

  I am using Captivate version 9.

  Thank you in advance for your help!

  Leigh

  A quiz question slide contains only three tests:

  • On slide Enter - used when you go to the slide, but not after
  • Success - when you question
  • On the last attempt - when you have exhausted all right tests and still did not have the correct question.  If you set attempts to infinity, this event does not fire and therefore cannot be used to trigger actions.

  As you noted, Captivate provides up to three different failure messages. There is not really much you can do with default quiz question slides beyond this point.

  However, you do not have the ability to use areas of text on a slide of normal to create something that works very similar to a quiz question slide (and it may be too much) but with more flexibility around how many events you have to trigger actions. What the user enters into the text field is recorded in an associated variable, which you can then evaluate forward conditional Actions.

• Failure messages can not be updated KB971029 Win Vista on YOUR site only showed 8007371C error Code is 80073712

  I was make failure messages can not be updated Win Vista only indicated on YOUR site 8007371C error Code is 80073712

  Benn has been trying for a few months. July 12 last day to support. Sent me him to all sorts of places to read things, nothing helps.

  Update fails: kb971029

  Error code: 8007371C NOT 80073712

  Hi ChuckEva,

  Check to see if this article helps you.

  You cannot install some programs or updates

• 'Check' media (failure) MESSAGE ON BOOT

  For the past 2 weeks, I get the following message is displayed on the system startup: "checking media (failure). The message appears twice, then the system starts normally and I didn't notice any problems with any of the applications and programs. I have not installed new software until this problem started and made no other changes I can remember. All the checks I ran showed no problem, I contacted Dell support, and their response is to re - install WIN 8 but I'm a bit wary of doing this because I fear that this will lead to other problems/questions.

  I saw the same problem mentioned on various forums for Dell and other machines, so it doesn't seem to be brand-specific, but no solution has yet been offered.
  I use a laptop Dell Inspiron 5520 with Win 8 (64-bit) and Service Cap 0.
  Any solutions or suggestions would be greatly appreciated. :)

  Thank you very much!

  This solved my problem.
  So just to repeat what he said,
  1. press F2 right when the Dell Logo appears.
  2. use the arrow keys to move to the tab named "Boot".
  3 select with the arrow keys so that the text named 'UEFI Boot' is white font color.
  4. navigate to the bottom, where it should say Windows Boot Manager
  5. press F5 or 56, to move in the list until you get the settings like:
  Windows Boot Manager
  UEFI Onboard LAN IPv4
  UEFI Onboard LAN IPv6
  6 hit F10, then your system will restart, without this annoying message appear.
  Thank you very MUCH MathewFrancis!

• Satellite M30-704 slow start and IDE #2 0203 failure message after replace it

  Hello

  two problems:
  first after replacing the cd/dvd drive, my computer does not start now automatically and displays a "IDE #2 0203 failure" message. I can start then it but all of that takes time?

  second problem: until I can access any program, a message will appear: "apdproxy.exe - Application error - the application failed to initialize properly (0xc0000006)" appears twice before so I can continue and then the computer is very slow.

  Can anyone offer solutions? (ps - these two problems are not related that they occurred the month apart).

  Thank you, Gardiner

  (1.) I would say that the BIOS can't handle the new drive correctly because wrong settings master/slave/c-salt but he s strange the player is running.
  I think you should check in the Device Manager, the primary and secondary IDE channels.
  The transfer mode must be on DMA if available and the type of automatic detection device

  2.), it seems the ' apdproxy.exe is a part of the Adobe Photoshop or a similar application.
  This software may cause an error. So just try reinstalling this program

• Continue to receive the KB928365 when I try to start it I get a failure message.

  OT: How can I get them to stop sending me KB928365?.

  Microsoft keeps clogging my phone with this update line.  It's for .net Framework v2, but my computer has only v4.  I get the update, and when I try to start it I get a failure message.  How can I get Microsoft to stop giving this gift?

  Hide it.

  1. click on start, point to all programs, and then click Windows Update or Microsoft Update.
  2. click on customize.
  3. Click to uncheck the box next to the update you want to hide.
  4. expand the update you want to hide, and then click the checkbox "don't show me this update again".
  5. click on review and install the updates.

  Information about the update: https://support2.microsoft.com/kb/928365/en-au

  Known issues that may occur during the installation of the update

  • You receive a Windows Update '0 x 643' error code or an error code Windows install "1603" when you try to install an update for .NET Framework 1.0, 1.1 or 2.0
    For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
    923100

    (http://support.microsoft.com/kb/923100/)

    When you try to install an update for .NET Framework 1.0, 1.1 or 2.0, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  • You receive an error message "the folder 'Program Files' contains an invalid character" when you try to install an update to security for .NET 2.0 Framework
    For more information about this problem when you install an update to security on 64 bit versions of Windows Server 2003, click on the number below to view the article in the Microsoft Knowledge Base:
    923101

    (http://support.microsoft.com/kb/923101/)

    Error message when you try to install an update to security for .NET Framework 2.0 on a computer that is running Windows Server 2003 x 64 Edition: "Error 1324. The folder 'Program Files' contains an invalid character.

• How to catch the exact validation error message?

  Hi experts,
  
  I want to intercept the exact validation error message.
  If the validate operation fails then I get the following SOAP fault:
  
  < env:Fault xmlns:ns0 = "http://docs.oasis-open.org/wsbpel/2.0/process/executable" >
  ns0:invalidVariables < faultcode > < / faultcode >
  faultName < faultstring >: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable} invalidVariables}
  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage} < / faultstring >
  < faultactor / >
  < detail >
  < exception / >
  < / details >
  < / env:Fault >
  
  However, in the Manager of the company (audit trail) I see the following message to the failure to validate the operation:
  
  Invalid data: the value of the variable 'req_ProcessAdjustmentOp' part 'bodyUPI' does not match the schema definition for this part of invalid text '?' in the element: 'date '. Invalid xml document is shown below:
  
  I would like to send this message to the service consumer because it contains more information about the error. How I do that? I've tried the function ora: getFaultAsString() but I had the original sin.
  
  Thank you
  Viktor

  The root cause of the problem is that, in the bpel fault lifted, the details of the fault are empty (i.e.) {summary}, {details} and

   are not populated for  element.
  This same issue was logged and tracked via Bug 12551111 - VALIDATE ACTIVITY DOES NOT POPULATE FAULT VARIABLE FROM CATCH - published on My Oracle Support.
  
  As per developments update in 12551111 :
  Failure content won't be set for standard faults according to BPEL specs. It will be available in the audit trail.
  
  This means that :
  1. {summary} , {detail} and 
  

  will be omitted for standard faults fault variables.
  2. given that the details of 'fault' are not met, "validation" of the variable of fault against the schema (RuntimeFault.wsdl) should fail.

  There is a demand for improvement already filed: Bug 12700279 - FAULT VARIABLE DETAILS ARE NOT POPULATED for STANDARD HOLES.
  Unfortunately, at the moment there is no workaround known solution for this.

  Best regards
  Oana

• Validation failure genuine Adobe software

  Hi I have creative cloud and have to pay for months... I tried to install the first and I get this message. I tried to reinstall the creative cloud application mgr and got the same message... Ugh! I'm downloading from your site - how can we not authentic?

  ERROR:

  Adobe Application Manager:

  We encountered the following issues:

  Adobe software genuine Validation failure. The product you want to install is not a genuine Adobe software and appears to be counterfeit.

  This might help: -.

  http://helpx.Adobe.com/x-productkb/global/digital-certificate-revoked-AAM.html

• Sporadic fan starting failure message. This speaks to the need to replace the fan?

  Sometimes when I restart my desktop computer after being absent for a day or two, I get a message of fan failure.  I immediately turned off the computer. I wait a few minutes and try to restart.  The reboot is going well.  Has anyone else had this type of message?  What I need to check that the fan is a failure?  If this is the case, where you can hold a replacement fan?

  Yes, this is indicative of a faulty fan. I was getting messages from 'System fan failure' sporadic on my HP a1632x. I first removed all dust and dirt, then decided to put one or two drops of oil on the bearings and 'exercise' the fan to work the oil in the compressed air. Two years later, and not once fan failure message.

  According to the fan being a system fan or CPU fan may affect where you can hold a replacement. To start, try Newegg.com. Take the measurements of the existing fan. Check the BIOS for the fan RPM speed and buy the one that is at least this fast if it is 10% faster. Make sure that it is a three lead with tachometer coonector.

• Glitch in Messages showing unread messages

  The Messages on my Dock icon indicates unread messages there.  When the application is open, there is no message showing.  When I click and hold on the icon in the Dock, it shows 3 unread messages (sorted by phone numbers), but no messages are when the application is open. How can I solve this problem?

  Please take each of the following steps that you have not already tried it.

  1 right-click or click and hold the dock icon to view the messages unread, as appropriate.

  2 quit and restart the messaging app.

  3. disconnect all messaging services you use and reconnect.

  4 log off or restart the computer.

• Faced with a failure of OSD task sequence. The failure messages in the end are: failure to file WIM mount (0 x 80070002) & Failed to create media (0 x 80070002)

  Hello

  Faced with a failure of OSD task sequence.

  The failure messages in the end are:

  --------------------------------------------------

  Has no file WIM mount 0 x 80070002

  Cannot create media 0 x 80070002

  CreatTSMedia failed with error 0 x 80070002 details MediaGenerator

  --------------------------------------------------------------------------------------------

  It comes via SCCM 2007 R3 and a version of Windows XP.

  I think 0 x 80070002 means "the system cannot find the file specified."

  But what file?

  How do you determine what the media Wizard is missing to generate this error?

  Is this a driver problem?

  Thank you

  John

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/configmgrosd/threads

  Hope this information helps.

• scanner failure message

  My printer will not make copies or scan.  I get the scanner failure message.  Any options?

  With a scanner failure message there is no much you can do. The document below will take you through all the steps. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax:
  http://goo.GL/MCuNG

• Why do I get the catastrophic failure message when I try to save?

  Why do I get the catastrophic failure message when I try to do a back up?

  Hello

  You don't say how you try to back up or where you save up to.

  And do not make backups on the hard disk recovery Partition

  Backups must be performed either on DVD or external hard drive.

  How to back up your data (this applies to all versions of Vista).

  http://www.wintuts.com/how-to-backup-your-data

  How to restore these data:

  http://www.wintuts.com/how-to-restore-files

  If you have Vista Business, Ultimate or enterprise, you can perform a full backup of the computer:

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  How to restore this backup of the computer:

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  See you soon.

• I have a unfinished message in "drafts". When I click on "drafts", message shows on the screen but is 'refractory', which means that I cannot work on it or send it. What to do about it

  Windows Mail

  I have a unfinished message in "drafts". When I click on "drafts", message shows on the screen but is 'refractory', which means that I cannot work on it or send it. What

  on this subject - step by step?

  Thank you

  Bogdan

  E-mail address is removed from the privacy *.

  In addition, how to activate cookies? I have accounts at multiple Web sites (like netflix, allrecipes... etc.), and whenever I go I need to sign my username, password...

  I tried to follow the instructions on the Windows online help, but they are useless - I must have a university degree in computer science to be able to follow this high technology

  languauge and navigate a web of Byzantines 'options', a crazy maze that could only be born in the sick minds of these stupid high school dropouts

  artists such as Bill Gates, Steve Jobs (RIP)... and the rest of them.

  If you, my tutor, happens to adore these punks, please disregard my harsh words and just help me.

  Thank you once again!

  I love the "punks", but must take over your computer and learn some things about it to use it properly.

  For cookies, in Internet Explorer go to tools | Internet Options (or control panel |) Internet Options). Privacy and things together in the middle and you can adjust which sites to allow.

  For the issue of Windows Mail, you can have the database corruption so try to compact and repair the database (see www.oehelp.com/WMUTil/), and then see if that helps any.  Try to restart also.  If you still have the problem, then look for the antivirus interference (disable e-mail analysis - see www.oehelp.com/OETips.aspx#3) and then delete your e-mail account, close and reopen WinMail and then add it back back.  Also, instead of using air streams is to use the file | Save as and save the unfinished on the desktop message when you dial the it.

  See if that helps.

  Steve

• When I opened my cell phone message shows that Windows detected a hard disk problem I use toshiba laptop windows 7

  When I opened my cell phone message shows that Windows detected a hard disk problem I use Toshiba laptop windows 7

  Hi Vimalpal,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of the model of the laptop?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you run the disk check and check if it helps.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.