value of Ridge over a given period?

Similar Questions

• Request for the old data that does not correspond to new data within a given period

  Hi all
  
  The reports that I need to create one for all employees who were going from one Department to another within a given period. The way I ran this report in Reportsmith (taken from our old system) was to compare the dept field from the start date to the dept in the end date field and it gives me these associate who had moved. I had to do it this way b/c dept changes can occur using several different types of actions (change to Surv, promotion, etc.), none of them exclusive to only change dept. We now use Oracle HRMS and I need to create this report even with this system using SQL.
  
  Does anyone know how to compare the data between two different dates and shoot those who do not match? Your help will be GREATLY appreciated!
  
  Best regards,
  
  Yasmin E. Alberto
  HRIS analyst
  [email protected]

  Hello

  Here is an example of an INSERT statement that may be relevant to this issue:

  INSERT INTO emp_action (empno,   action_date,                           deptno)
                  VALUES     (7902,    TO_DATE ('2009-06-18, 'YYYY-MM-DD'),   10);
  

  If someone wants to help you, in doing anything more than guess, then that person probably will need create tables that are similar to yours (but much smaller).
  To do this, they can issue instructions CREATE TABLE to the tables, the INSERT commands to fill (put data in) the tables.
  The tables invloved in this problem are probably simple, so if I can see some INSERT statements, I can probably write instructions CREATE TABLE myself and save you the trouble.

  For more info on INSERT, see the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_9014.htm#sthref8944]

  If you compare the deptno to a row of a table to the previous line, you can use the analytic LAG, something like this:

  WITH     got_prev_deptno  AS
  (
       SELECT     empno
       ,     action_date
       ,     deptno
       ,     LAG (deptno) OVER ( PARTITION BY  empno
                                   ORDER BY         action_date
                        )   AS prev_deptno
       FROM     action_table
  )
  SELECT     *
  FROM     got_prev_deptno
  WHERE   deptno         != prev_deptno
  AND     action_date >= TO_DATE ('2009-01-0'1, 'YYYY-MM-DD')
  AND     action_date <  TO_DATE ('2009-03-01', 'YYYY-MM-DD')
  ;
  

  Like all functions, the OFFSET is described in the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/index.htm#I].

  Published by: Frank Kulash, June 18, 2009 11:53
  Originally missed a few quotes.

• How to get the last day of a month for every 2 months for a given period?

  Hello

  Can is it some please let me know how to get the last day, last day of the week, the weekend last day, last Monday, one month for every 2 months for a given period?

  Thanks in advance.

  Try the below

  SELECT LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))) lastday.

  BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'SAT '.

  SO LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))-1

  WHERE TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'Sun '.

  THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))-2

  Of OTHER LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  END as lastweekday,

  BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') IN ('Sam', 'SUN')

  THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  Of OTHER LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  -(TO_NUMBER (TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))),' from)) - 1).

  END as lastweekendday,

  BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'MY

  THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  Of OTHER NEXT_DAY (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), "LUN")-7

  END AS lastmonday

  FROM (SELECT SYSDATE startdate,

  SYSDATE + 300 enddate

  THE DOUBLE)

  CONNECT BY LEVEL<=>

• See documents inserted\modified to a given period of time

  Hi guys,.

  Is it possible to display all the records (maybe the list table) inserted or modified in a given period?

  This should give me some clues in some records to the database level in a large application debugging.

  Thank you very much

  Napster

  As far as my knowledge goes, there is nothing that your DBA has done for backup and can be restored, I guess you will not be able to recover it back. Only option left would be to debug the code to check which could be modified/inserted.

  Thank you

  Ishan

• Maintain a VXI - 11 connection continues over TCP/IP to a device over a long period

  Hello

  Is there anyone managing to maintain a continuous connection of VXI - 11 from Matlab to a device connected using TCP/IP over a period of a few days to weeks? In the meantime, the unit could be handle quasi-continuite orders SCPI and send information back to Matlab very well also?

  I use Matlab 7.40 with the instrument, NI-VISA 460 runtime control toolbox and Anritsu device with an Ethernet 10BASE-T interface. After about 24 hours of SCPI continues handling command, I get the error "VISA: the Protocol specified is not valid.

  A solution is to send that an SCPI reset command to restart the device and try again. Network and power systems are very good; No, the problem here. If this isn't a known problem, the problem is maybe on the side of the unit.

  All your comments/ideas would be very welcome

  Thank you

  You use DHCP or static IP address? Normal DHCP lease is renewed every 24 hours and who knows what that the instrument will during this period - reset the link perhaps!

• While loop with reading of text file - calendar of events in a given period

  Hello world.

  I created a program that if serial interface via a port to a syringe push in my lab. Currently, the program reads in a text file-flow rate values and sends them to the pump, one by one, through various commands. I need to ensure that whenever a new flow rate value is sent to the pump, it does in a specific/hard time for a while. I.e. every 0.1 seconds, changes in flow rate and must are active until the next period. I tried to use a timed loop and I think I've succeeded, but it hogs system resources, so I was wondering if there was a way to do it using the number of cycles or something of this nature. I just started using LabView, so I'm slowly getting the hang of it (easy when you watch my VI!)

  See attached VI. I took orders from serial port and have instead orders display in an indicator. The nested and densely populated while loop contains the commands that need to be completed/last during the period (like 0.1 second).

  Thank you for your time and help!

  -Phebotalus

  Hi, you should read some introductory material on LabVIEW to down the idea of the stream.

  Basically, the data flow in the wires from left to right, and any node will not work until it has reached all of his contributions.

  The thread of the error is the best way to run data streams.

  ***

  In your VI I use data wires, their execution through structures, and forcing the structures to run in the sequence.  Using a structure of sequence you mentioned in your next post will force the two scripts to execute in the order of (the only one we discussed to be in race condition.)

  Similarly, for brevity, I would wrap the EMO and she is business structure in a single sequence and force it to run last using stream.  In this way the user has the most possible time to decide to hit the EMO before she is called by the application.  As it is now, it most likely is interviewed at the beginning of the loop, so if it's the exchange value you won't see results until the next loop.

  When running in execution of highlight you see the order of data flow, but that is not guaranteed to be the same for a normal performance, where the use of the data stream.

  ***

  The counter tick account ms up to a very large number and then "says" reset and start counting again.  I know you want to START the loop as close to every 10 ms.  Yes, using data flow, take the number of cycles first, perform actions, then return the number of cycles.   The second time of the tick read that you are in a nested loop that does not stop until you get 10 or more difference on the number of cycles.

  And, on the off chance that you must achieve "return" on the tick counter comes stops the nested loop then move.  (if the second measurement is less than the first, then the tick counter handed.  If you miss this situation while you'd have to wait a long time for the condition of the difference > 10 in the reunion, basically locked in the loop.

  ***

  You could put the EMO sequence, we have seen, in line with data streams.  Before or after the second control of ticks will not make much difference in terms of 10ms.  I would put it after checking the tick, again give the user more time to hit the EMO if necessary.

  ***

  I put in a queue for the stream error and removed the other stuff.

  LV2010

  Check out some of the LabVIEW intro docs, they are online, they discuss these issues and much more.

• total number of bytes of network traffic for a given period and given a vm guest

  Hello

  I want to see the total number of bytes of network traffic a given virtual machine generates in a give period.

  I think it's possible with a great metric but don't know how.

  Any help is welcome.

  Kristof

  This is for vrops x 6

  1. create a metric configuration

  
   
      
  
          
          
          
      
   

  2. create a new dashboard with a list of objects and graphic metric

  3 edit the object list widget, and the filter object type\Virtual Machines and save

  4. change the metrics graph and select the metric config that you created in step 1 in the metrix configuration box and save it

  5 in Widget interactions select list of objects in the menu drop-down and click on apply Interactions and save the dashboard

  When you open the control panel and select a virtual machine from the list (or search for it in the filter), it will display the average amount of data received and transmitted in Kbps in the metric table. Use the controls to date to specify when you want to see the data to and from.

  Hope this helps

• Find an attribute value Boolean inferred at a given date in the past

  Hello

  Need advice on below:

  Looking to find a value of the Boolean attribute to a given date in the past.

  Ex: [b1] condition A is true if

  age < 18 of the person and (the age is calculated using the date of the assessment [this is a basic attribute spent] year subtracted by year Date of birth of the person)

  the person has met the State B (may be that there is a finding of another rule that serves here as a condition which, in turn, uses the date of assessment)

  Looking to find if the [b1] was true at another date in the past. (for example a 6-7 month date before the date of delegated review)

  The function according to temporal but he explores always give the date [b1] value assessment and not the past date we want to find the value of.

  Thank you.

  In the example, the conclusion rule (condition A is true) will have a constant value (true or false) if there is no temporal logic feeding, i.e. no attributes with temporal values and no temporal function. However, if 'the person we met condition B' has changepoints, then it will be the conclusion.

  For example, if the value of ' the person met the condition B is initially 'false' and become 'true' to a point of change on 01/01/2014, then "condition A is true" will be set to 'false' at the start and 'true' 01/01/2014.

  Temporal data in the Debugger entry: http://docs.oracle.com/html/E48373_01/toc.htm#Debugging/Debug_temporal_rules_and_data.htm#Enter

  Temporal reasoning can be very powerful when used correctly, but most of the time it is exaggerated and made just the things more complicated than they should be. Most date calculations can be addressed with functions and logic of regular date.

• The date ranges whose value is on two different reporting periods

  I have a SQL puzzle. How Can I with a single SQL statement GB of data like this to a reduced set of data knowing that a simple use of min/max does not correctly report 9494 x TVALUE is actually on two distinct periods separated by the 26202 x TVALUE. I messed around by using the analytical functions of the Oracle of lead and lag to see if if she me net anything or to reveal at least one model that I could take advantage of. It is probably with myself, but I'm not.
  
  Any ideas?
  
  EMPNO TVALUE TSTART TEND
  "1234", "x 9494" 11/5/2007 12/5/2009 ".
  "1234", "26202 x" 12/6/2009-4/30/2010 "»
  "1234", "x 9494" 5/1/2010 8/18/2011 "»
  
  OF THIS
  
  EMPNO TVALUE TLAG TLEAD TSTART TEND
  "1234" "0" '0""0' 10/16/2000-5/30/2002
  "1234", "x 493" "0" "x 493" 5/31/2002-9/20/2003 ' "»
  "1234" "x 493" "x 493" 'x 493' 9/21/2003-11/1/2003 ' "»
  "1234", "x 493" "x 493" '0' 11/2/2003-4/17/2005 ' "»
  "1234", "x 5821" "0" "x 5821" 4/18/2005-9/2/2006 "". "
  "1234' ' x 5821" "x 5821" "x 5821" 9/3/2006-2/9/2007 "' '". "
  "1234' ' x 5821" "x 5821" "x 5821" 2/10/2007-7/7/2007 "' '". "
  "1234", "x 5821" "x 5821" '0' 7/8/2007 11/4/2007 ' "»
  "1234", "x 9494" "0" "x 9494" 11/5/2007-5/9/2008 ' "."
  "1234' ' x 9494" "x 9494" 'x 9494' 5/10/2008-12/20/2008 ' "."
  "1234' ' x 9494" "x 9494" "x 9494" 21/12/2008-12/31/2008 "' '". "
  "1234" "x 9494" "x 9494" "x 9494" 1/1/2009, 5/12/2009 "" "" "
  "1234", "x 26202" '0""0' 12/6/2009-4/30/2010 "»
  "1234", "x 9494" "x 9494" '0' 5/1/2010 8/18/2011 ""»
  "1234", "x 3718" "0" "0" "8/19/2011-10/22/2011.
  "1234", "x 76364" '0""0' 10/23/2011-12/31/4712 "»
  
  FOR THIS
  
  EMPNO TVALUE TSTART TEND
  '1234' '0' 10/16/2000-5/30/2002
  "1234", "x 493" 5/31/2002-4/17/2005 ".
  "1234", "x 5821" 4/18/2005-11/4/2007 "»
  "1234", "x 9494" 11/5/2007 12/5/2009 ".
  "1234", "26202 x" 12/6/2009-4/30/2010 "»
  "1234", "x 9494" 5/1/2010 8/18/2011 "»
  "1234", «x 3718 "8/19/2011-10/22/2011"»
  "1234", "x 76364" 10/23/2011-12/31/4712 "»

  Ok. I think I understand your question now. I need to use the 'beginning of a group method:

  with sample_table as (
                        select '1234' empno,'0' tvalue,'0' tlag,'0' tlead,to_date('10/16/2000','mm/dd/yyyy') tstart,to_date('5/30/2002','mm/dd/yyyy') tend from dual union all
                        select '1234','x493','0','x493',to_date('5/31/2002','mm/dd/yyyy'),to_date('9/20/2003','mm/dd/yyyy') from dual union all
                        select '1234','x493','x493','x493',to_date('9/21/2003','mm/dd/yyyy'),to_date('11/1/2003','mm/dd/yyyy') from dual union all
                        select '1234','x493','x493','0',to_date('11/2/2003','mm/dd/yyyy'),to_date('4/17/2005','mm/dd/yyyy') from dual union all
                        select '1234','x5821','0','x5821',to_date('4/18/2005','mm/dd/yyyy'),to_date('9/2/2006','mm/dd/yyyy') from dual union all
                        select '1234','x5821','x5821','x5821',to_date('9/3/2006','mm/dd/yyyy'),to_date('2/9/2007','mm/dd/yyyy') from dual union all
                        select '1234','x5821','x5821','x5821',to_date('2/10/2007','mm/dd/yyyy'),to_date('7/7/2007','mm/dd/yyyy') from dual union all
                        select '1234','x5821','x5821','0',to_date('7/8/2007','mm/dd/yyyy'),to_date('11/4/2007','mm/dd/yyyy') from dual union all
                        select '1234','x9494','0','x9494',to_date('11/5/2007','mm/dd/yyyy'),to_date('5/9/2008','mm/dd/yyyy') from dual union all
                        select '1234','x9494','x9494','x9494',to_date('5/10/2008','mm/dd/yyyy'),to_date('12/20/2008','mm/dd/yyyy') from dual union all
                        select '1234','x9494','x9494','x9494',to_date('12/21/2008','mm/dd/yyyy'),to_date('12/31/2008','mm/dd/yyyy') from dual union all
                        select '1234','x9494','x9494','x9494',to_date('1/1/2009','mm/dd/yyyy'),to_date('12/5/2009','mm/dd/yyyy') from dual union all
                        select '1234','x26202','0','0',to_date('12/6/2009','mm/dd/yyyy'),to_date('4/30/2010','mm/dd/yyyy') from dual union all
                        select '1234','x9494','x9494','0',to_date('5/1/2010','mm/dd/yyyy'),to_date('8/18/2011','mm/dd/yyyy') from dual union all
                        select '1234','x3718','0','0',to_date('8/19/2011','mm/dd/yyyy'),to_date('10/22/2011','mm/dd/yyyy') from dual union all
                        select '1234','x76364','0','0',to_date('10/23/2011','mm/dd/yyyy'),to_date('12/31/4712','mm/dd/yyyy') from dual
                       ),
                 t1 as (
                        select  empno,
                                tvalue,
                                tstart,
                                tend,
                                case lag(tvalue) over(partition by empno order by tstart,tend)
                                  when tvalue then 0
                                  else 1
                                end start_of_group
                          from  sample_table
                       ),
                 t2 as (
                        select  empno,
                                tvalue,
                                tstart,
                                tend,
                                sum(start_of_group) over(partition by empno order by tstart,tend) grp
                          from  t1
                       )
  select  empno,
          tvalue,
          min(tstart) tstart,
          max(tend) tend
    from  t2
    group by grp,
             empno,
             tvalue
    order by tstart,
             tend
  /
  
  EMPN TVALUE TSTART     TEND
  ---- ------ ---------- ----------
  1234 0      10/16/2000 05/30/2002
  1234 x493   05/31/2002 04/17/2005
  1234 x5821  04/18/2005 11/04/2007
  1234 x9494  11/05/2007 12/05/2009
  1234 x26202 12/06/2009 04/30/2010
  1234 x9494  05/01/2010 08/18/2011
  1234 x3718  08/19/2011 10/22/2011
  1234 x76364 10/23/2011 12/31/4712
  
  8 rows selected.
  
  SQL> 
  

  SY.

• How to make a transformation of Fourier data acquired over a long period?

  Hello

  I am trying to configure Labview such as my data will be collected during the 10ish minutes and then have it handle all data in a Fourier transformation. I know that measuring the spectral power "tool" allows for the FFT, but my current attempts seem to have LabVIEW occupying in a limited time with a value of measures. Would it not be possible to achieve my goal without having to resort to the backup of the data I do then compile and analyze separately?

  
  

• Changing the values of control over a key

  Hi, I have a situation where I have several digital controls where you can change to different values. I have also several subVIs with references to control (as described in this article: http://labviewwiki.org/Control_References) that takes in the references to these digital commands on the mainVI. These subVIs permanently read values into their own net.

  So whenever I change a value on any of the controls, the values change of course in the subVIs, since they refer to the value of the control.  How I would do the actual value change that once I clicked the ok button?

  To illustrate this, I've done a VI with a structure of the event and another while that continoulsy reads a reference to the control and updats loop indicator. I see some heavy solutions, while I have two controls for each value. The second control would then be hidden and written only in the case of the Ok button, press. But having two controls to do something simple, like this seems superfluous.

  
  

• Sequential Workflow Condition in UCM for a given period of time

  Hi all
  
  I need to create a workflow where 7 users would get a single document in a workflow and they can order the document but they can check-in the document at any time between the period of one month. I created the workflow, but when the first user withdraws the document then the second user do not get an option at the checkout of the document.
  
  The requirement is adaptable to the Complutense University of MADRID.
  
  Please suggest!
  
  Thank you and best regards,
  Richa

  Checkout is designed in the way that only a user can have a document to start at the moment - if two users change simultaneously in the same place in the document, the changes will be considered as good?

  If you can somehow 'divide' the content item (for example a content item is a book and you can divide it into separate chapters, written by different authors), you can use folios. Otherwise, the user that extracts the document should go back (checkin a new version or cancellation of the withdrawal).

• How to set the default value of a column from the value of the 2 columns given

  Is it possible to set the default value for a column A, as the concatenated values of columns B and C of the create table statement itself without using the trigger.
  
  for example, in a line, if column B is 'James' and column C is "smith" then the column has must be "james Smith".
  in another line if column B is 'Bob' and column C is "Taylor" then column should be "Bob Taylor"
  
  Thank you
  YG

  Yes, it is possible. But what is your version of the database? Try to use "virtual column. Search for a virtual column in the following link.
  http://www.Oracle.com/technology/pub/articles/Oracle-database-11g-top-features/11g-schemamanagement.html
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_7002.htm

• Can I lock an Essbase database for a given period?

  Hello world
  I was thinking about how this can be done. Simple ways to do this? Please, post your suggestions. Periods would be defined by years or a combination of periods and years.
  
  Thank you
  Chrystelle

  So it is a planning application, then, how are the users who access data, if it is through forms, forms of smartview then security filters and open/close year/planning period will be sufficient.
  If it accesses the data purely to essbase for example through the excel add-in then Yes you must have additional filters and a process applied again after a refresh, maybe a batch maxl.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Need for total program that GB is sent during a given period. All around?

  I am considering a new ISP that charges based on GB downloaded and uploaded every month. The basic rate is 25GB with a different rate for 50 GB and a third for unlimited GB. Frankly, I don't know how much GB I download and upload each month. I wonder if there is an add-on that will keep track of the bytes downloaded into Firefox and Thunderbird and I can reset at the end of the month. Anyone know of such a program? Thank you...

  There are a number of available, see the Firefox extensions this search for AMO. You'll need one that is specifically compatible with your ISP.