Vista crashed after installing MS office 2010 beta version

Similar Questions

• Delay of Subscriber notification followed Winlogon 0x800705b4 after installing MS Office 2010

  My PC Windows 7 Professional x 64 now takes a long time to start. I see a screen "Configuring Updates" which remains at 0%, followed by "failed to configure.

  The logs show a second delay 300 as follows:

  -L' subscribed to winlogon notifications took 300 second (s) to handle the notification event (CreateSession).

  So my updates pending show as follows:

  -Installation failure: Windows failed to install the following update with error 0x800705b4: update to the list of compatibility view Internet Explorer 8 for Windows 7 for x 64-based systems (KB2447568).

  Even for updates KB2284742, KB2388210, andKB2249857

  This started happening when I installed Microsoft Office 2010 (download HUP).

  Suggestions?

  Error_Timeout 0x800705B4

  From: you can encounter errors related to the connection of temporary when you use Windows Update or Microsoft Update to install updates

  First see if there is a proxy server used by the security software installed by following the steps for Windows 7 Sub
  Method tip B: remove the entry from the WinHTTP proxy configuration proxy server.

  Netsh winhttp show proxy from a command prompt displays Direct access , type exit and then press enter at the command prompt to close.
  Otherwise type netsh winhttp reset proxy , and then press ENTER to remove the proxy, then type exit, press ENTER to close the command prompt.

  If a proxy server is not the question...

  We use a 3rd party firewall? If the answer is Yes, then suggest you set up boot system, restart the system and make sure that the native firewall of Windows 7 is now on by opening the Windows Firewall in Control Panel (click on the view by: link and set it to small icons to be able to access the Windows Firewall), then see if the updates install now.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If the updates install or not, Cancel now clean boot configuration and restart the system once more.

  If updates are always not to install please copy & paste the last lines of 50 or more WindowsUpdate.log in your response.
  How to read the Windowsupdate.log file

  Expert MowGreen Windows IT Pro - consumer safety

• Satellite L350-24U: Windows Vista crashes after installing SP2

  Hello

  I own a Satellite L350-24U laptop with Windows Vista 32. I bought in October and had to reinstal the OS twice now. Still, it crashes after installation of Service Pack 2. After you restart the system, a blue screen appears, giving the following information

  STOP: 0 X 00000024 (0 X 00190444, 0X86B9BAD0, 0XC0000102, 0X00000000)

  I had to reinstall Win Vista with HDD Recovery from Toshiba (press F8, then repair etc.) and everything worked properly again.
  THS time, it's more serious. Last night the system shut down whenever you use internet explore (after about 30 seconds). SP2 has not been installed, but there are so many problems, I decided to install SP2, because I hoped that the bugs I had with SP2 would be eliminated. When installing SP2, the system crashed again, and now I got the same bluescreenmessage new.

  I tried to reinstall Vista, but the Toshiba HDD program starts no more: it is said: the installed program is not working (or something similar) - please click on ok to close.

  I did not burn the cd of recovery yet, so I don't know what more can be done and online support is closed today.
  I'd really be very happy for any help
  Thank you

  Hello

  I searched a bit on the Microsoft Web site and on the blue screen, I created this article:
  http://msdn.Microsoft.com/en-GB/library/ms793935.aspx

  So I think that the reason for the BSOD is a corrupted file system or a defective HARD drive. You should check the drive using the Drive Fitness Test for example.

  I put t understand why you didn't burn the disc of recovery yet. Why you didn t read the manual at first?
  Now, you have only one option to get a new recovery disk: Please order a new Toshiba directly: https://backupmedia.toshiba.eu/landing.aspx

• Computer Windows Vista crashed after installing Service Pack 1

  original title: SYSTEM CRASHED AFTER INSTALLATION OF SERVICE PACK 1

  Running Windows Vista Home premium. I get a message the an update for windows is available for Service Pack 1. A few weeks ago, I received the same message and proceeded to the installation of the update to Service pack 1. After I did, my computer crashed and I had to reinstall windows using the MS. technology Now I get the same message and I don't want to take a chance and run the update.  Why I get this message, and why it crashed?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• User account deleted when I uninstalled Office 2010 Beta, how do I get it back?

  Details:

  • I am using Windows XP Pro SP3
  • I had already installed MS Office 2010 Beta. When I went to use it recently, I learned the period Beta was over and I was given two options: 1) buy Office 2010 or 2) uninstall. I chose to uninstall. When I restarted the computer after uninstalling, my user account has been deleted.
  • Fortunately, I had an another user account with administrative access, but it is never/rarely used, so when I opened this account is like watching a new computer desk. I see again all my files on the C drive of the other account, but they are all read only files.
  • I restarted the computer in safe mode at a given time, with networking and could see my old user account. Now I'm trying to find a way to recover permanently.
  • Any ideas are greatly appreciated!

  Hello

  It could be that the user account registry key is deleted which is instructed to show the user account name in the login screen. I suggest you follow the steps mentioned below.

  Step 1:

  I suggest to do a restore of the system on the computer and check if you are able to see the user account.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Step 2:

  I suggest start in the other user accounts that you have never used before and then remove the Office 2010 system by referring to the article below.

  How to uninstall the suites Office 2003, Office 2007 or Office 2010 so I can't uninstall it from Control Panel?

  http://support.Microsoft.com/kb/290301

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install Outlook Express 2010 (Beta) that email by default in Windows 7

  I try to install Outlook Express 2010 (Beta) as my default email in Windows 7 Home Edition.  It does not appear in the list of programs can.

  There are no Outlook Express 2010, beta or otherwise.

  Try posting here rather on Outlook 2010 beta (until Office 2010 is made public): http://social.technet.microsoft.com/Forums/en/office2010/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• VMware Workstation 11 crashes after installing VMware tools

  As the title suggests, VMware Workstation 11 crashes after installing VMware Tools with a guest Windows 7 x 64. I am running VMware on a host Windows 7 x 64. It happens every time I try to install the guest operating system. Attached to this post are all the newspapers that I could find that I thought would help solve the problem.

  
  

  Thank you

  Wila

  Hello again,

  Maybe the following post helps (where you installed Visual Studio)

  How to troubleshoot Workstation (vmui) - Access Violation Crash? How to troubleshoot Workstation Crash (vmui) - Access Violation? How to troubleshoot Workstation Crash (vmui) - Access Violation?

  --

  Wil

  As you may already know, VMware has just released a major update for 11 workstation (including VMware tools updated). Workstation now works almost perfectly. I don't have accidents since then. This means that I have was right in my post above. This is indeed nothing more than a BETA version of VMware buggy, lazy, masked as a "final". Wow, it looks like that a respectable company like this would not resort to such unethical practices. I mean that you would expect this kind of crap of a company like Electronic Arts, but VMware? Come on guys, you're better than this!

• The pre installed MS Office 2010 Starter Pack

  I can't get my MS Office Pro Plus 2010 to install properly and recognize my files because of the pre installed MS Office 2010 starter pack. What do I need to uninstall the starter pack, and then reinstall my legitimate copy before that it will work and recognize all my historical Office files?

  Please review the information in this page Web Microsoft ANSWERS. It seems that you can uninstall Starter now and fix installation Pro but your mileage may vary.

  Frank

• I bought educational individual creative cloud on Mac, but after installing it still shows trial version on the soft CC.

  I bought educational individual creative cloud on Mac, but after installing it still shows trial version on the soft CC.  How to configure the version full?

  Hello

  Please visit:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

• -Error code 646 - repeated the failures (now for the last two months) to install updates Windows 7 S/W, possibly after installation of Office 2010?

  For the last two months - easrly November, when stopped down, I saw 10 message updates are being installed. This follow-up installation of Office 2010 (download from Web site), who bought Office 2007 earlier this year, and by choosing to take the free update promised for 2010.

  On the control, I find that whenever all ten updates failed to install (error code 646)

  Concered updates are KB2202188; KB982726; KB2289161; KB2289078; KB2413186;  for Office 2010

  and KB2345000 - Word 20120.

  KB2409055 - 2010 Editor;

  KB2289116 - Social connector;

  KB2431831 - knitting 9;

  KB2433299 A Note;

  Any thoughts there?

  Steve L

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121http://snipurl.com/164ypp>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• Windows 7 RC crashes after installed updates. Initial Setup works fine.

  Everyone knows about system crashes after installation of microsoft after a successful Windows 7 updates installed.  I would like to point out that the installation of the operating system is going very well and there seems to be no problem, another that I have a found unknown device that is not described here until you go into system properties.  When the windows update notification is in place there are usually 7 updates important and 36 optional updates.  Optional updates include drivers for the video card and other drivers and also a Toshiba ACPI value-added product for the General and logical devices.  I don't know what it is because I can't find any information about it.  It is not really important at this stage because everything hangs!  I had this problem since the beta version and it is still not resolved.  I have read and tried to fix this with "accidents of the Explorer of windows 7 after update" using the Microsoft fix by regedit keys.  It did not work.  I also tried various updates one at a time to see if it has an impact, without success.  I tried to go to the Toshiba website for updates, but so far there is none.  I continue to read the forums and also sent food to Microsoft beta on this problem.  Someone can help me.

  System Specs:
  Toshiba phone L355D-S7829
  AMD Turion x 2 dual core mobile RM-72
  4 MG RAM
  ATI Radeon 3100 Mobile graphics card Shared
  Dual-boot system: Vista 64/Windows 7 (64-bit) RC

  System works fine on Vista and as long I don't upgrade anything, Windows 7 works very well.  Software installs works very well as long as they do not require a video card update.  I tried to use the video driver for Vista and it still crashes.

  If I can offer any other information I can be set aside, please let me know.

  Thank you!

  James

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the Windows 7 Forum.

  These Forums you are in are to help posters with the problems of Vista.

  Windows 7 questions should be directed to the place that above.

  See you soon. Mick Murphy - Microsoft partner

• Uninstall office 2010 bet problems

  I installed beta office 2010 and then found I don't love it, but I now can't uninstall it properly, help.

  I use vista sp2.
  Canvey

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Can someone help me solve the problem APPCRASH on Windows 7? The problem occurs after installation of Office 2010

  Hi all

  the OS is Windows 7 SP1 32-bit Enterprise Edition.

  I use an important banking software package called ORF more than Misys, the application is critical for the company, the problem occurs after the installation of Microsoft Office 2010 Professional Plus with Service Pack 2; the ORF more crashes when you try to print to a PictBridge compatible printer.

  I get the following message from crash:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: orfplus.exe
  Application version: 5.0.1.0
  Application timestamp: 3f6f479b
  Fault Module name: StackHash_802d
  Fault Module Version: 6.1.7601.22436
  Timestamp of Module error: 521eaab0
  Exception code: c0000374
  Exception offset: 000c38b7
  OS version: 6.1.7601.2.1.0.256.4
  Locale ID: 2057
  Additional information 1: 802d
  More information 2: 802d0d721d077b7993d17470b8164201
  3 more information: d6a2
  Additional information 4: d6a2e9e6b15ae70428294b9407d7e88d

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ----

  I tried to exclude the orfplus.exe of the DEP, but that does not solve the problem, the application always crashes when I try to print a report.

  ----

  As a result, we are unable to upgrade our office staff of Office 2010 Professional Plus application.

  I appreciate if someone can help me solve this problem.

  Thanks in advance.

  Hello Matt,

  According to the issue description, it seems that you are connected to a network domain, so I suggest you to republish your query on the TechNet forum and I hope that you will receive a response it a better way that they are trained on the computers in the domain and their settings.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• Firefox crashes after installing 29,0

  People,
  I installed 29,0 early Saturday morning (10/05/14) before the 29.0.1 patch has been published. Even after 29.0.1. installed himself, he continued to be planted after 1-2 minutes. I couldn't even keep it long enough to generate reports of crash and never had the crash report dialog box.
  
  I downloaded and installed 28.0, but nothing has changed.
  
  Today, I watched in the Mangler task to see if something came out. I open the Services tab and found that nearly half services for Firefox was "arrested." Being desperate, I decided to try to restart some services and on the top 10. I started to receive messages one by one that said that a service could not be restarted because of bad software from a facility (no surprise).
  
  I gave up and tried to restart Firefox again. This time, he stayed up! So, I tried to find the grave down for 5/10. There is NOT! Apparently, the program did not stay up long enough to generate and save a report of crash in the usual way.
  
  But after trying to restart services "Stopped", Firefox is stayed until the fairly long for me to read the page giving suggestions for accidents. I decided to restart in safe mode, and it remained up to again. So, try to restart some services both run in safe mode appear to work (we'll see).
  
  I went to the directory of App Data\Roaming\Mozilla\Firefox\Crash reports and found two reports of incidents for 5/10. They were not in the subfolders 'pending' or 'subject '. However, when I tried to copy them to another folder, they disappeared.
  
  So, where should I go from here? I have a disabled browser that is important for my work. I especially need add-on Adobe Acrobat to work. You can fix this?
  
  
  
  Charlotte Wolter
  
  [email protected]

  Here is the list of "All reports of incidents." No multiple accidents which took place may 10 after installing 29,0 appear here. Apparently, the browser works so badly that it has not yet generated incident reports.
  
  
  
  Date of the ID report
  
  25b4b155-179a-4d09-b72e-7bde46e24f1d 21/04/2014 17:38
  
  21bbefaa-D430-446F-A0C7-efde37c24131 03/11/2014 21:32
  
  f484ca3f-b9c7-42f0-89d2-12d0d1127c1f 02/03/2014 12:12
  
  435fd93a-ae70-4a61-A216-50b62ace89a4 26/01/2014 12:55
  
  89bbd2c9-6b30-495a-BA32-ca2b1ab4035b 26/01/2014 12:44
  
  8b78e516-320F-434a-b307-153132e4df73 20/01/2014 10:11
  
  BP-a27ae405-72CC-4EC7-b989-23abe2140111 11/01/2014 10:34
  
  
  
  Finally, I saved my favorites and uninstalled Firefox completely. Then I installed the 28. It has not crashed, more. Then I upgraded to 29.0.1, and now it seems OK.
  
  But, why did I have to go through all that? That the average user could do that? N °
  
  And still no recognition of what happened with 29,0. I'd love to charge an hour for the time I spent on this or maybe I just do not contribute this year.
  
  
  
  Techlady