Vista Inspirat. Ignored WARNING.
OK my laptop is windows xp and iv always hated windows look base so I found that it was possible to make your xp look like vista. I went to do so whenever my computer over there 1 problem that prevents him from using internet. the error message reads.
Wcescomm.exe - Illegal unauthorized system DLL
DLL user32.dll system was moved in memory. the application will not work correctly. the move took place because the DLLC:\\WINDOWS\system32\SHELL32.dll occupied an area of address reserved for windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL.
This is the first message of warning and here is the second
wcscomm.exe = illegal unauthorized system DLL
DLL user32.dll system was moved in memory. The application will not work correctly.
and from there, it goes about the same as the first warning message. I changed the layout because im a silly ungr8full who wants more can somone help me solve this problem?
Hello
Please continue with the following steps to support...
-Create an alternate user account and check if the account else works successfully. If so, use this account and migrate the data above.
-System Restore to a date and a time before making any changes on your system.
-Proceed to a repair facility (below are the steps)
Please proceed to a repair of the OS installation. In case of failure, please make sure that you back up your data to an external location before performing the repair. Here are the steps to proceed with the repair.
To start the repair facility, load Windows 7 and make sure that you are connected to an administrator account. Then, insert the Windows 7 DVD and run the file setup.exe from the menu autoplay:
Then click install now to start the process:
Now, uncheck the box "I want to help improve Windows ' and select the optionto go online to get the latest updates for installation :
The installation process will then search online for available updates, which may take a few moments. Once complete, read the license agreement, then checkthe box I accept and clickNext:
Now, click on the box to upgrade to start the Windows 7 repair facility:
Windows will then be re - install Windows 7 over itself and you will be informed of its progress as it does. Your PC will reboot a couple of times during this proc
Once restarted, you are then prompted to enter details of the usual initial installation (for example, the license key, location and time settings). When it is finished, the repair facility was conducted entirely.
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Tags: Windows
Similar Questions
-
I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help
Run the Setup again.
Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation
Does that help?
If the above does not help then try to reset WMC: -.
Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.
Now reconfigure WMC again
-
Windows Vista, get a warning that I have a Trojan horse
Well, I'll start with the Trojan warning that keeps popping up, I tried to move it to the vault, and nothing happens. It is said he is in my system and should not be removed but the pop up warning me is really boring. Then my windows updates do not work, he repeats to me is not currently runnning and won't let me turn it on. Then my computer crashes every time I do anything and I have to keep restarting. I don't know if their related. I tried to restore, and he says that the process cannot be completed. I tried a few internet options and still nothing. Any help with this would be greatly appreciated.
Original title: Windows Vista problems
1. Please download the free version of Malwarebytes.
Update immediately.
Do a full scan of the system
Let us know the results at the end.http://www.Malwarebytes.org/products
2. Next you get advice from specialist about your problem via the links below.
-
Lately my pc has been randomly close without warning. It doesn't seem to be compatible on when he decided to "shut down". I noticed that if I turn it on and just leave, so it seems that the time it takes to turn off is shorter. But the time intervals are different each time. If I turn it on and use a heavy application immediately (like Need for Speed) and it remains on 90% of the time without problem. I tried a number of analyses of virus and so far nothing has much turned upward. I checked my hardware and all is well. There is a problem in the windows registry, virus, or vista is just corrupt.
I am running:Vista Business SP23 GB ram3.0 ghz AMD Athlon 2 xNVIDIA 9500 GT graphics cardPC Chips motherboard80 GB HD (hard drive was free, hoping to get a much bigger VERY soon)Hello1. don't you make changes before the show?This happens usually if the program or device driver is defective.Step 1: to find out what is causing the problem, check the event logs to find out what is causing the problem.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-ViewerYou can try the following steps to keep your system up to date, as it has sometimes solves the problem.Step 2: we recommend updating all drivers for devices on the computer and install the latest updates of windows for better functionality.
To update the device driver, try the following steps.
1. click on start, type devmgmt.msc and press to enter.
2 to the list of issues, do a right-click on the following and click on update driver.
a. graphics cards.
b. the network cards.
c. Chipset driver.
3. If prompted, restart the computer and follow the same steps for updating other drivers.
For more information about updated drivers, visit this link: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
Step 3: check in safe mode.
If the problem does not persist in safemode, it then confirms that some programs not Microsoft is causing this issue.
Visit this link to start the computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
If the problem persists, check the logs of events and after return details, so that we can help you further.I hope this helps.Kind regardsSyedAnswers from Microsoft supports the engineer. -
Vista stops without warning regardless of which program, I opened
This has happened for three weeks. I am a user of modrate green. I have to restart several times during the two session.
HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Hello
When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.
Can you help me
Thank you
Original title: Cprogram
Hello
Method 1:
I recommend you put the computer to boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope this information is useful.
-
Download/Download speed of control with windows vista
I've searched for a solution to control my download speed on my system. I live in a House with other roommates and need to know if there is a way with windows vista to restrict my network speed and download. I looked at the software and routers, routers, or way out of my price range and offers much more, then I would need a home network. Software requires another computer to stay on at all times, working as a router/firewall software. If there is some hidden in windows settings, this would solve my problem.
Thanks, SkydayHi Skyday_BG,
Thanks for posting your question on the Forums of Windows Vista.
There is no option to set the download speed on a particular computer in Windows Vista. There are 3 third party applications which allows you to limit the download speed of Windows Vista.
WARNING OF THIRD PARTY SOFTWARE
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope the information will help. Please post back and we do know.
Thank you & best regards
Ashish Gupta
Microsoft Answers Support Engineer -
Vista Home Premium is short-term memory
When using Samsung Digimax Master editing error message appears "Out of Memory". I have 2 GB of RAM even on my old XP 256 RAM was ample and used to warn the 'memory is low"that allowed me to stop and save my work so far. Vista gives this warning so my work is lost then which is really annoying. Is it possible, until memory becomes critical, I can set up the Vista to give "memory is low" warning too?
You can increase the amount of virtual memory that Windows is configured to be able to use.
-
Satellite L300D - 12L: Error: MISSING BOOTMGR + HDD partition 2 corrupted
Hello
I recently bought my L300D - 12 laptop computer in a store Staples close to me (for use at the University). After about 4 months of use, the system seems slow, and yesterday, my laptop started giving me the BSOD messages whenever I tried to boot up the laptop and have to restart.
I tried to use the safe mode to move all my files on a desktop computer and that seemed to work well sometimes even safemode could not start with a BSOD with [memory management error] coming and sometimes IQRL_Less or equal...
I can also have accidentally deleted partition HDD 2... but I thought that it would be OK, because I had created a recovery disk already in the days following the purchase, and it works.So my problem is this, my laptop is now free of my files as I have carefully their saved with the storage devices removable mass via a defective safe mode; I have used the disk recovery... but clarification, I think I should list step by step what happens when I use the disk...
(1) "Windows is loading files" (a black screen with a white bar at the bottom)
Microsoft green loading bar 2)
(3) utility recovery gray and white décor with "Recovery Utility" box telling me to choose a language (I choose English)
(4)' Please select the item you want to install and click on [{Next >}.] Current recovery drive size is: 76GB (I choose then with "English (Windows Vista)" highlighted)
(5)' WARNING: your hard drive will be completely erased. Do you want to continue?' (I click 'OK')
(6) command prompt appears with the following...Verification of the HDD1
HDD1 not found!
Try to remove all possible partitions on the HARD disk letters 0...
Try to remove all the possible partitions on 1 HARD drive letters...
Microsoft DiskPark_Version 6.0.6001
Copyright1999-2007 Microsoft Corporation.
On computer: MINWINPCDisk 0 is now the selected disk.
DiskPart succeeded in erasing the disc.
DiskPart succeeded in creating the specified partition.Partition 1 is now the selected partition.
DiskPart successfully assigned the point of letter or get in the car.
100% complete
DiskPart successfully formatted the volume.
DiskPart succeeded in creating the specified partition.Partition 2 is now the selected partition.
DiskPart successfully assigned the point of letter or get in the car.
100% complete
DiskPart successfully formatted the volume.
DiskPart succeeded in creating the specified partition.Partition 3 is now the selected partition.
DiskPart successfully assigned the point of letter or get in the car.
100% complete
DiskPart successfully formatted the volume.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Copy the files of database recovery
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
HTMPREP...
Boot...
EFI...
HDDPREP...
sources...
Tools...
Bootmgr...
1 file (s) copied.
Original setenv.ini...
1 file (s) copied.
Warn the HTML...
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Unzip the operating system and WinRE
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Set RECO_info_GUID = A5CD0EA6 - 2 = 4E10-8C6B-4902928583FB 02c
Set RECO_info_imagecount = 2
Set RECO_info_partnumber = 1
Set RECO_info_numsplit = 5
Set RECO_info_bootindex = 0Copy of F:\06738XSP.swm to V:\HDDRecovery.SWImg [1/5]
1 file (s) copied.
Copy of the CRC files
1 file (s) copied.
1 file (s) copied.
Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [2/5]
1 file (s) copied.
Copy of F:\06738XSP3.swm to V:\HDDRecovery.SWImg [3/5]
1 file (s) copied.
Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [4/5]
1 file (s) copied.
Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [5/5]
1 file (s) copied.
Setting permissions access to 'V:\HDDRecovery '...
Unpack the WinRE...L ' ImageX for Windows tool
CopyrightMicrosoft Corp. All rights reserved. 100% step
The image is applied successfully.Unzip the Vista operating system...
Image x tool for Windows
CopyrightMicrosoft Corp. All rights reserved. Progress: 0% audit of the Splitloader...
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Configuration of Split charger
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ERROR: No BCD on two or a partition!
Press any key to continue(7) an error box comes up with
"imagex.exe - Application error.
The instruction at 0x776359c3 referenced memory at 0x527d838c. The memory could not be read.
Click OK to terminate the program ' (I click OK)(8) at the command prompt, I press a key to continue. The cmdprmt stops and everything is empty...
(9) I restart the computer
(10) this happens on a black screan"BOOTMGR is missing".
Press Ctrl + Alt + Delete to restart(11) the repetitions of cycle no matter how many times I run the recovery disk
SO! I read a few issues with the recovery discs and most of the time the answers are buy one out of the toshiba site... my question is this...
Based on my case above... do you think that the error is by damage or internal memory corruption?
Is the recovery disk I can buy different from the one I created?WHAT ON EARTH IS GOING ON WITH MY LAPTOP AND HOW DO I FIX THIS!
Post edited by: ArthurTYL
Hello
This error is interesting:
> ERROR: no BCD on two or a partition!
> Press any key to continueThe BCd is the Vista bootloader which is necessary to load and start the Vista operating system.
It seems that it is not found and so Vista will not start.The next error message saying: BOOTMGR is missing, press Ctrl + Alt + Del to restart would confirm my hypothesis.
You said that your system slows down considerably.
Possibly the HARD drive is faulty. I have only this one explanation.
In your case, the warranty is valid, and I think you should ask the ASP in your country for assistance guys could check the HARD disk and other parts and could replace it.Good bye
-
Store.E Canvio HDD - Win XP logo test has been placed correctly.
Try to install this drive but says that he has been testing windows logo for XP compatibility.
Why?
Hello
To my knowledge, this error pops up to avoid errors with Windows hardware and related software that is installed. Mainly the indication that the software or driver or one of the files is not signed for the version of Windows that you are using in your case of Win XP.
Windows system conduct detection signature each time an INF file is used to install the equipment from a designated device class. You can simply the button continue the installation of the software
For the future, you can turn off this kind of message.
1. open system in Control Panel.
2. on the Hardware tab, click driver signing.
3. under verification of signatures of file, click on ignore, warn or block
Click Ignore to allow all device drivers must be installed on this computer, regardless of whether they have a digital signature. -
Qosmio G40 - 11 d - can't read 4 GB SD card
Hello
I have the card SD Transcend * 4 GB (no SDHC *) and I want to use on the G40 - 11 d card reader.
Windows Vista (SP1) me warned of "the card is not formatted" but at the same time, this card works perfectly with the Asus eeePC windowsXP (sp3) (and other devices too)How can I solve this problem?
Hello
As I m not wrong not it takes a utility of the SD card that should allows you to format the SD card in the Qosmio s card reader.
Format so first of all, then check if you could read this card.
Good bye
-
BOOTMGR is missing after you mount the new hard drive
I have an acer 6930g laptop using windows vista. My laptop crashed and left the hard drive corrupt / unreadable, so I set up a hard drive again.
When I start it shows message BOOTMGR is missing.on restart alt f10 not work.i have the 2 dvd backup which I was invited to burn when I first bought computer I tried to load these, but the ability to load backup Hi drive light not so can not click on it. This option is the factory restore and it shows error impossible restoration - reason 0xd000000d. Click ok to restart the computer... and then I am back to BOOTMGR missing again.Hello
If you created the backup restore disc complete by using Windows backup and restore, you try to perform the system restore. If you have not created backup disk using restore option, I suggest you to contact the computer manufacturer to restore Windows vista.
Warning: When you use a Windows complete PC backup image to restore your computer, it is a complete restoration. You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten. You must regularly back up your files by using the back up files Wizard.
For your reference, follow the steps in the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
-
How to remove Tune Up Utilities 2011
Need advice on how to remove Tune Up Utilities 2011.
Hello
(1) have you tried taking ownership of this file?
I suggest you to see link below and check if it helps.
Method 1:
How can I connect as an administrator?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator
For your reference: How to open a file if I get an access denied message?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message
Method 2:
How to manually remove programs from the add tool / remove programs: http://support.microsoft.com/kb/314481
(Also applies to Windows Vista)
Registry warning:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756Hope this information is useful.
-
Canon IP2600 driver and Windows 8
Hello world
I tried to download the driver for Canon printer from various reputable sources, online and I get an error message that indicates that the driver is for 32-bit layout only and cannot run on my current system.
Does anyone know what I can try to get my printer to download for Windows 8?
Thanks in advance for the help & Jolly happy Christmas holiday...
2600 Pixima drivers are here
You shouldn't try get pilots from everywhere but the source.
File nameip2600svst64215ej.exe
Version of the file2.15
Size of the file5.51 MB
Languages folderEnglish | Japanese
After the Date10/08/2013
History[Ver.2.15] - Windows 8.1 has been added as a supported OS. - Windows 8 has been added as a supported OS.
EnvironmentWindows 8.1(64bit) Windows 8(64bit) Windows Vista(64bit)
Warning- With Internet Explorer 11, a web site containing Japanese may not be printed properly. In Windows Update, update the OS and Internet Explorer to the latest version. - If the printer driver is installed in Windows 8, and if Windows 8 is upgraded to Windows 8.1 while keeping the printer driver installed, Enable bidirectional support in the printer properties may be deselected, disabling detection of the ink level, etc. Re-install the printer driver after upgrading to Windows 8.1 and Enable bidirectional support.
-
I like windows 7 - I don't understand why the hell Microsoft does not have staff of digital photo or feel that he is not a necessity - was not necessary - to include the image resizer (such a small but effective and useful point) in windows 7.
Let me first start by saying:-I know there are other programs out there are perhaps those who are still free which is re-size of the images. This question goes to those who normally use, or perhaps use the toy of the power of Microsoft which has a Re sizer image and they want - if you do not change the pictures or knows no image editing etc.... Please pass this question...
I like windows 7 - I don't understand why the hell Microsoft does not have staff of digital photo or feel that he is not a necessity - was not necessary - to include the Re sizer image (such a small but effective and useful point) in Windows 7.
I am convinced there is no staff person at Microsoft who have an interest in photography because Microsoft has not come out with anything that looks remotely Digital Image Starter Edition and/or Suite or similar since it was released in 1996. It was 14 years ago. Think of the interest for photography and photography giant growth and product photography, etc... all this seems to have escaped to the spirit of an entire society for more than a decade. How is that possible? Then Windows 7 comes out, and with it, not a single program remotely associated with this boom in the huge market that is PHOTOGRAPHY and all that it encompasses. Not even the new SIZER IMAGE that Microsoft added to XP and was a hands down... feeling! Not in Vista and millions of complaints/requests to bring to the rear for - recycle for Vista - all ignored for the next 3 years - not in Windows 7. During this time... Mac sales are sky monte skyrocket. Was this all just too much to ask a simple society... couldn't you have at least thrown buyer of Windows 7 a bone and include the Power Toy Image Re sizer you missed in Vista and add it to Windows 7? I've read articles where other people say the same thing, I am at the moment - all eager to know W H Y?
The digital camera - videos - etc... the industry has exploded with new technologies and became 'the' new obsession/hobby/interests of thousands or even millions of people - make the pro little people who cared too long at all if they captured a moment on film. How does this "boom" (if you want) in the interest of this leaflet thought eyes and the thoughts and minds of ALL the creative staff at Microsoft... it's amazing really - who are the spirits of power/creation at Microsoft for lack of a better term - IDIOTS... My God - no one is STUPID THAT... because it is simply STUPID.
If Microsoft (and Microsoft is probably) a SILENCE behind closed doors with say ADOBE to promote ADOBE and AGREEMENT at the same time works back to create whatever it is perhaps at a more reasonable cost that are competing directly with ADOBE and others - and then go out with him... because it's really make Microsoft look STUPID and God knows they have accumulated more than way too many "STUPID" already in the years - come clean on this because this is a HUGE BEAST. And PLEASE... If you're not going to acknowledge the industry of digital image which is 1 million miles ahead of you already - please at least... re-the Power tool Toy "Image Re-sizer" for Windows 7 64 bit... which may not be so difficult or too much to ask - and if the statements that I made in this message are not sufficient reason - then please read thousands of blogs. etc... there where others wondering the same thing of you / Microsoft. Maybe the others they did on one your kinder, gentler. ?
Hello
I suggest you follow the link on the resizing in Windows Live Photo Gallery.
http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx
You can also leave your comments to Microsoft on a Power Toy resizing tool, updated at the link below.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
This is a very recent development.
-
can't right click on the pictures to save my files.
up to classified to the latest fire Fox browser
-
read the spreadshit have thong
Hello!!! I want to read my excel file (String) data. Please tell me what to use VI. Is there other data type where I cn a string in the form table? And easily recover it. Thank you.
-
.edb file is badly damaged. What it means and it can be fixed?
Impossible to update my computer and after following the instructions in the Help menu, I received the above error message.
-
IF you are looking for this issue you may find other places where I posted questions, got some answers, tried and so far none succeeded.The keyboard n doesn't have this problem with my Windows XP starting and using the two USB connection and PS/2 con