Vista-start services

Similar Questions

• SE 8024008 error when you try to update Windows Vista 32 Service Pack 1 to Service Pack 2

  Hello

  This Dell Inspiron notebook running Windows Vista 32-bit Service Pack 1 and Windows Vista stopped editing about a year ago.  I just got the Service of update to start working again, a sort of...
  However, when I tried to update to Service Pack 2, it gave me error 80246008 and when I tried the link to fix, Services did not show the background BITS Intelligent Transfer Service () in respect of the services, so I followed the suggestions of Jose Antonio Ponton Posada CEO and tried the repair tool valid my Windows Vista 32 BIT and run the tool , but he said that repair BITS is not required on this computer.
  I checked the State of the Windows event log, and it was running.
  Please tell us how can I update Windows Vista Service Pack 1 running on this computer for the current Service Pack.
  Thank you
  Roxy111

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-vista-update-service-failure/b89bca27-9739-4bde-9f6c-a57ade14781d

• Problems Vista start up, please help out if you can

  I have a HP Pavilion dv4, vista 64 bit home
  It is only a month
  This problem came out not the case, I stop the machine from the menu start normally
  the next morning I started it upwards to get a box of "Startup Repair" pop up on the screen right away and he said "research issues", then another box pops up saying "Startup Repair cannot repair this computer automatically, sending more information can help microsoft create solutions", then he gives me the choice to send information or not so I clicked Yes to send information about this problem, so it has a box that says "Windows cannot repair this computer automatically and it gives me the possibility to each veiw diagnostic and repair details or view advanced options for system recovery and support, I tried to do a system restore to an earlier date, but he let me only to restore my 'Sytem C»» ":" drive my "Recovery D:" and my "Boot X:" both say "this disc is not in the selected restore point" someone tried to help me find the problem but not lucky I'm able to open a command prompt, if that helps in any way, im in no hurry to fix it because I don't need the computer immediately , but he was sensitive on this subject files that I am really upset if were lost, although I doubt that something wrong with the c: drive it seems that something is wrong with the boot drive, but that's why im here, if the experts can help you as soon as possible it would be greatly appreciated.

  Hello danielingalt89,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and want to save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Have you tried to make the clean boot before installing this update. There could be interference or a program context prevents the installation of this update. If you have please ignore this information.

  Clean boot

  We will also test in a clean boot environment to see if this issue is related to interference from other services / programs:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7 log on to your account.
  ---------------------------------------------------
  Click on start-> all programs-> Windows Update and reinstall the update you mentioned previously.
  ---------------------------------------------------
  To restore your Normal startup:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Normal startup.
  3. When prompted, click on restart.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation to upgrade Windows Vista Ultimate Service Desk on a pc Home Premium

  The bad news is, my sweet 3 year old 32-bit HP laptop (under home Premium), is dead, disastrously, this morning, after which a critical backup has not... my head turns... The GOOD news is that now I have the ability to clean install my new "Windows Vista Ultimate SERVICE DESK Upgrade"... Unfortunately... I can't understand... It won't let me "ipgrade" even on a restored factory pc... I counted "clean install", but am completely confused by the options window (& or not I'm sure using this software...) I checked before I bought & used to say that it works very well on this laptop...) ... In any case, I get the window & the following choices: * "Disk 0 Partition #1 (C) - Total size 221,1 GB, free Go 186,3 > & > * '0 Partition 2 HP Recovery Disk' - Total Size 11.8 GB, free space 1.4 GB / / / I do not understand the partitions or anything on this operation & need instructions...» I KNOW that this software is SUPPOSED to work properly... & of course, I don't want to go without it... NEXT disaster, I need the ULTIMATE cigarette back... / / / is there someone who understood? I can't draw conclusions, or analyze what all the... Thanks in advance for any help...

  Hello

  you do the upgrades within an operating system running and enabled

  Reinstall Home premium and then upgrade to ultimate

  and do NOT touch or modify this HP Recovery partition

  who is there to put your computer to how you bought it if necessary

  you press F11 on startup to start the process of recovery from him and then follow the prompts

• eror message when I connect a profile of the user of Windows Vista Business Service has no logon.

  eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work

  Hello

  as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk

  then do a restore of the system of breast

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and to read this information to try to fix the user profile cannot be loaded problem

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Correct way to start/services *.exe file

  When installing version 5.5 update for NTI Backup Now software of executables to start services (agentsvc.exe) has an incorrect path and will not run. Can I change the registry keys in order to correct the path information, or is there another way to fix the problem?

  I know that I should back up the registry and create a restore point before any changes to the registry. Thanks in advance for any help on this matter.

  It's updated operating system Vista, upgraded installation and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• "Apple Mobile Device" failed to start. Check that you have sufficient privileges to start services system... then options to retry, cancel or continue without installing the component

  After using this computer for 7 months (purchased new in November) and iTunes worked perfectly well until the day he stopped to view the device option (one that shows which iPhone or I pad... etc connected it) and then you can sync devices. but this disappeared and iTunes could not re - download.

  I contacted Apple support and went through all the options to remove and re - download iTunes... but didn't ' work. Each time, after downloading the bulk of the program - he stops to give the following message is displayed:
  iTunes: cannot start Service "Apple Mobile Device" (apple Mobile Device). Check that you have sufficient privileges to start system services. »
  Help, please

  CSWUK

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

• Failed to start service secuity

  Posted this question before, but since this is my first time I couldn't find where I could go to see my question or answer...

  so if I posted this twice, I apologize...

  Windows 7 64 bit

  have a security error unable to start service

  perforned a scan using mcafee and it said that it had removed the infected... file and that the computer is secure

  conducted an analysis using the microsoft... scanner result... .no infected files...

  complete the following steps to no vail...

  went to the service and clicked on auto... apply... beginning... service does not start

  also, went on the services tab to connect and clicked on the local system. .get an error 1079... the a/c specified for this service is different from the a/c specified for other services in the same process...

  backed up registry and deleted HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\wscsvc.. .and opens Notepad and copied the contents of Microsoft Article ID: 2519899 and imported to the registry... service does not start

  did a clean boot... .Disabling mcafee security... tried to start the service... won't start...

  also open by default on the computer and tried to start the service, it does not start...

  also unable to update windows... change UAC...

  Please please help

  Discussions were merged.

  Deleted duplicate.

  a sfc/scannow, executed

  The C:\Windows\System32\wscsvc.dll's exsist

  cm

  Opens Windows directory using the command % systemroot %

  Antonio Dsilva

  The service DLL may be invalid, or missing in the registry. Download, unzip and run the REG file below:

  http://www.Winhelponline.com/blog/wp-content/uploads/Misc/W7-wscsvc.zip

  (via the various registry fixes for Windows 7/XP/Vista - the Winhelponline Blog)

  Restart Windows and the display of the State of Windows Security Center.

• Error "Cannot start service bluetooth stack" whenever I restart my computer.

  Original title: I have Windows 7 and have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  I have Windows 7 and you have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  Hello

  You did it all changes before the show?

  Method 1: Manually start the Bluetooth service.

  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.
  e. check if the problem persists.

  Method 2: Put the computer to boot and see if that helps:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• Satellite C660-1F1 Toshiba HDD Recovery 'the installation program starts services' crash?

  This is my second attempt at recovery using the hidden picture. The first attempt, attached to a previous point of loading Windows 7 ;( However, during this attempt, he was more than an hour on the screen "Setup starts services" with a light moving under it.

  Does anyone have a reasonable idea how long it takes to treat? Thanks in advance.

  Have you thought about an SSD instead of HARD drive?
  I replaced the HARD drive with an SSD and I must say that I wasn't expecting these excellent performance...
  The SSD is much better that a HARD drive and you will be really satisfied with the performance of the SSD

• Satellite L30 - 105 - tapping Touchpad Vista start menu comes up

  Since I got my laptop (PSL33E) when I press the touch pad to select something sometimes the Vista start menu happens which is really annoying.

  Someone else had this problem?

  > When I press the touch pad to select something sometimes the Vista start menu comes up

  I think it is nothing unusual, because the area touchpad or corners can be configured to randomly.
  I recommend that you check the touchpad configuration and if you want to disable some annoying features or elements.

  The configuration of the touchpad should be found in the control panel-> mouse-> properties or advanced control.
  I do not exactly remember the way where to find these options.

  Play everywhere

• MY mail server hardisk full so cannot start services & also unable to access the mail server

  I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• After Windows Vista starts in a minute, or sometimes less my office goes from his normal self in a white pagecould someone please help me get back to my office?

  I tried to restart my computer, but only to get the same result, I tried to backup and resture but my computer tells me always that it is restureing the computer already. If someone can help or has had the same promblem I would like to know what I could do?

  Thank you

  Dave.

  Hello

  • You receive an error message?

  You can view these methods:

  Method 1:

  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.

   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  Method 2:
  You can always follow performance issues in Event Viewer that all error codes are followed here.

  Reference:

  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Cannot start (Service event log)

  While planning to try a task sheduler task, I have been informed a necessary service work not (event log). On trying to start the necessary service (event log), I received the following error message. {Cannot start service on Local, specific error 126 computer event log module cannot be found.} I was online looking for a solution without success, would appreciate any assistance to resolve this problem.

  It's me, George. I solved my problem with a little help from Microsoft.  The solution is simple for those of you with the same problem.  Rather than search the web and the Microsoft Web site, I simply clicked on my "Help and Support" icon on my desktop and entered in the same query.  This time, I got a response that actually question my problem even though she warned that she could apply to XP.  It was for Windows 2000, but I tried anyway and it worked.  The cause of the problem is a DLL missing from the Windows\system32 directory, a file named "eventlog.dll.  It is still on your computer in a different directory, so all you have to do is a search under the road you have installed Windows on this file and copy it to the Windows\system32 directory and everything should be fine.  It's as simple as that.

  I hope this helps all who can be soon _ trying to correct what I tried to correct for the past three days.  Good luck and may the force be with you.