VMFS extend computing performance impact

Similar Questions

• How can I improve my computer performance ratings?

  Recently I bought Halo 2 for Vista. I loaded into my computer and am really a lot about the installation process. Then I clicked on "Finish." After that, I got an error message that says "Initailization Failed". He said that he might be missing data or the disc is scarched. This was not true. It also says that you can reinstall and it would work. No luck with that. Evenually, I thought it might be my computer performance ratings. !) SIDE NOTE - I have a DELL inspiron 530 withVista '32'. (!  So I checked my notes and my areas I need to improve are: graphics (3.9) and graphics of games (3.3). As you probably know your base score is determined by your lower under-score. My lower under-score is games graphic that is 3.3. I want to get between them and my graphics (3.9) until a 5.0 rating. Can someone help me?

  You need to buy one - it is a piece of hardware (no software which can be downloaded).  Make sure the card is compatible with your computer, your BIOS, your motherboard and your version of Vista (you may need to consult the computer manufacturer to confirm, you get the right card - or get them specifically for your computer).  Also make sure that it's "quite better" solve the problem - and I would like to get a little more because the computer components become obsolete very quickly.  It will be delivered with the software, firrmware and/or drivers that must be installed before the latter won't work - instuctions should come with it or be available on the web site of the manufacturer of the video card or the provider.  Make sure that the card has enough RAM onboard to make a difference if you want to improve these scores as much as you do.  The card will tell you your new score when you buy - you'll just have to get a good and check it out to see if it does the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I use Intel (r) 82945G Express chipset family, my computer performance score is between 2.3 and 5.7 I'm using windows 7 pro 32 bit how to speed up my system.

  1. I am using windows 7 Pro 32-bit on Intel (r) 82945 G chipset.

  2. my computer performance details are as

  Processor of 4.7 (using mid-range (R) Premium (R) D CPU 3 .00GHz)

  5.2 memory (it's 2 GB DDRII)

  Chart 2.3

  3.1 games graphics

  5.7 primary hard drive (I have 1 TB Seagate)

  3. Please help me to improve my score

  abadola

  I don't think that you will be able to increase your score of graphics or increase graphics performance using this chipset... He is old enough.

  If your computer allows it, you can install a separate graphics card.

• The performance impact on the size of the CHM file

  Is there any performance impact depending on the size of a CHM file?

  Main issues people with the help file performance (whether a CHM file) are related to the number of images, the hotspots DHTML, bookmarks, and links they have in a topic. The number of subjects in a CHM shouldn't be a problem. What exactly you are trying to access the performance impact?

• Improve my computer performance

  Hello

  I have a laptop HP pavalion works on a microsoft windows XP operating system and I want to improve my notebook, s performance.firstly to defragment the system.how you would do.

  Thank you, Bill Gower.

  Hello

  1. open 'Windows Explorer',

  2. Select 'my computer '.

  3. right click on a drive you want to defragment, and then click "Properties".

  4. Select the 'Tools' tab, then click on to "Defrag now".

  

  You can still do your work during "Drefrag" is running, slow down a bit.

  Kind regards

• Measure the performance impact of a PowerCLI report on vCenter

  How will I know how much of an impact on the performance my powerCLI report will have on the performance of my Server vCenter?
  If I run a report for example which attracts a large number of events of vCenter Server and sorts through them, is that the processing and memory usage will be mainly on the virtual machine, I am under the report of?  How much charge it will put on vCenter itself?  (I see use RAM up substantially on the virtual machine, I am running the report)
  Thank you!

  Just leave out the MaxSamples parameter

• Space/performance impact of attachments on oracle applications

  Hello everyone!
  
  We are about to go to allow attachments in our Oracle Apps R12.1.3 (RHEL 5.5 64-Bit. Database 11.1.0.7). Before you go for it, however, we want to know how it will impact storagewise and performance wise.
  
  Thanks in advance!
  
  Vinod
  
  Edited by: VinodNagpure January 6, 2013 23:19

  Attachments are stored in the table FND_LOBS - attachments are not compressed. There should be no performance issues don't related - extra storage will be necessary depending on how many and how big are the attachments. Store attachments on the file (instead of the database) system is also an option.

  How the store Image/PDF spare part on the filesystem in 11i and R12 (as an attachment file directory) [ID 294525.1]
  Is there a limit to size of file for EBS Attachments [ID 739643.1]
  Attachments and exports, a Troubleshooting Guide [ID 135444.1]
  Attachments in the Oracle Applications 11i, storage and considerations [ID 176658.1]

  HTH
  Srini

• KB973687 - msxml3.dll msxml6.dll - services.exe uses excessive virtual memory, the performance impact on the first logon after restart

  Since the installation of fix KB973687, I had several SP2 and SP3 systems exhibit behavior that makes them unusable until after the first logon is completed, which can take up to 20 minutes.   I've identified the patch (KB973687) and DLLs, that it will update the origin of the problem, but uninstalling the patch does NOT return to normal operation.

  I need to understand how to upgrade these systems WindowsXP SP2 and SP3 to restore normal operation, reinstalling Windows, programs, and settings is an expensive solution.

  The performance problem is caused by services.exe slowly consumes about 1.5 GB of virtual memory, and then slowly releasing.  This seems to be triggered by the first logon after restart, this connection is very slow, the screen is blank for most of it, there might be failures of allocation memory during logon.  Once complete this opening of session and memory usage returns to normal levels, recording and return to work normally as do other operations until the system is restarted.

  Spent a lot of time working with SysInternals Process Explorer, trying to find what specific service might be involved, lightweight system for bare essential services with no luck.

  KB973687 seems to offer only two files msxml3.dll and msxml6.dll.  Uninstalling this patch, resettlement V3 and V6 of the XML parser fail to restore normal operation.

  Not all systems seem to have place still restrict the differences.  Systems that are appear to be the oldest, with Windows XP has been installed for at least a year, installed Microsoft Office and Adobe Acrobat.

  Looking for these forums and the Internet, I believe that many have encountered this problem, but have not is it this level of analysis, seem most attribute it to a virus, I see several start explorer.exe manually, I didn't know all the alternatives before reinstalling Windows.

  Found the solution, the following has been fixed in System Cleaner of Comodo 2.2.129172.4:

  "For some strange reason, after changing some settings of the system with the CSC LastGood.tmp Directoy began to constantly be read from my hard drive. This would occur up to about 90 to 99% of my memory was used and then stopped, begin to free the memory, and the system began to slowly to function normally.
  I used the process explore from sysinternals to help diagnose the problem with any process other than services.exe using memory.

  I used sysinterals filemonitor to see LastGood.tmp directory has been read repeatedly.
  After you have uninstalled CSC the problem has been resolved. »

  Even with the effort to find the solution, it was better to reinstall.  Hope this solution helps others.

• XP SP3 reinstall slower computer performance, a lot of hang ups, delayed write failed and bsod.

  Hi everyone;

  Thank you all very much for putting time and effort to help as many people. I thought I was opening first with a receipt.

  I'm very tired on my computer. I already spent days and days trying to solve a lot of questions. Literally, my computer has been hindering my work since the middle of January!

  I have a Dell Dimension 4700 Intel Pentium 4 CPU 3.00 GHz 2.99 Ghz and 3.25 GB of Ram, with a Hitachi 500 GB HDS721050CLA362 as the main disk (Disk0) and a Seagate 1 TB ST31000528AS secondary storage (disk 1) with Windows XP SP3 disk. I have insalled all updates (including frame work 1.1 windows.net, 2 something etc).

  I have avast antivirus and it is always kept up to date as well as ad-aware and anti malware malbyte.

  I recently bought a BlacX Thermaltake Docking Station and 2 TB Hitachi 3.5 car as well. I try to have 2 backups of my work, because I lost valuable data in the past.

  Initially, I had only 2 GB of Ram, but I knew that my computer could handle 4 GB because I have confirmed these specifications with the people of Dell who assembled to the machine. Right now I have 4 GB of ram, as confirmed in the menu setup.

  I also originally had a Maxtor 80 GB disk0 and disk1 No.

  I opted to replace the Maxtor 80 GB because it is 6 years old already and I run Adobe CS4 production Premium. I thought that 500 GB would suit my OS & important programs and large temporary files that they generate.

  When I reinstalled the operating system on the Maxtor I had formatting problems. It hangs at 94% or I would get a BSOD on start up. Then I used the 500 GB HDD and ran the Installation of XP on it and was fine.

  I used it for a week, but I noticed his incredibly slow, despite having all this ram and a clean operating system installation.

  I am also BSOD when I launch the antivirus OR when I try to copy files from one HD to another (of the primary transmission on the slave drive OR the disk from 2 TB to dock, or from disk on the drive connected slave or the slave on the primary drive drive). Other times I'll take an absurd copy for a file time relatively small i.ye. a 300 MB file will suddenly be more than an hour to copy.

  I have run diagnostics and diskscan and receive nothing wrong. Windows finished 'control' the disc and not tell me that something was wrong. I look at the disk management tool, and all readers "(healthy)" next to them.

  The skeptic in me feels like this happens when I install the updates of the .net framework. I already reinstalled OS two times.

  Isn't .net important features of the machine?

  I'm so lost in this and I spend most of my days Googling solutions and try to implement them without result. I've disabled "write cache" and reactivated it. I went through a bunch of procedures aimed at preventing the failure of writeback. I do not have any type of file sharing software or torrents on my machines at all and I do not share my files. My firewall is on.

  All that I know, I did everything by the book and to the letter, so I feel like my computer could run surprisingly, not like I have a lemon and I'm terrified that I'll lose all my work despite the fact that I have enough space to save all of the universe.

  Thanks again for all your help! It is really appreciated in advance and always.

  PEI

  I ended up reinstalling the operating system again, it works fine now. But it was very very weird. Thank you very much to try to advise me, I know that it was a complicated issue.

  See you soon
  PEI

• "Adding another 8 GB of ram would improve computer performance of H8 - 1520t.

  I have a HP h8 - 1520 computer t with a bar of ram of memory DIMM DDR - 1600 GB 8.  My more demanding program is Microsoft Flight Simulator X with acceleration.

  Kitco wrote:

  Have a CPU i7-3770 3.4 and a Nvidia GTX 660 1.5 GB DDR5 video card. These are very good components.  They must be good with MS FltSim.

  I thought I could just use the 8 GB of ram I have (a stick) and then install a more accurate memory stick live, for a total of 16 GB. Fix?  As I said, if you can be sure that the new 8 GB stick of memory is compatible with the existing 8 GB, then it is not a problem.  Just make sure that they are compatible, or you've lost your money.

  If your problem is solved, please click "accept as a Solution.

• If a logging program button has been installed on your computer performs this Act of when it is installed or is able to access the previous use of the keys?

  Hello

  I received an email from a friend that I opened, it has since informed me that his computer has been hacked and thought that a virus has been incorporated into the e-mail. I have a limited knowledge of computers and would like to know if a logging program button has been installed it reads the keys historically or only from when it has been installed? Also, I found that a user account and password that I had not placed on the computer had been set and the user account setting that governs the installation of new programs was at a minimum level.

  I deleted the new user account and password and changed the UAC to the highest setting and did a scan of my computer using AVGfree, he showed a threat of conduitinstaller.exe but it would allow me to delete or archive. A search on the internet about this program shows that it is a threat, this page: http://www.removeonline.com/conduitinstaller-exe/ offers to download a tool to remove it, but I am now worried I'm going beyond my capabilities. Could I have some advice please. I'm currently travelling so don't have do not have access to a friendly computer shop is where English is spoken.

  If I do all the work financial online from the computer in safe mode, this will get me in until I can get the problem sorted.

  Geoff

  Scan your PC with these two free tools

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

• Computer performance are slow and unresponsive in the middle of the running applications

  Original title: Volsnap error, VSS, registry handle leaks, the drivers won't load is not etc.

  Little by little over the last few months, my computer has been slowing down, suddenly "not responding" in the middle of a program and a few other oddities.  I can't identify when this started because he was progressive.  I had to replace an old drive SSD C and when I did, I also bought a new copy of Windows 7 Prof 64 bit SP1.  Drive C is now SATA 6.

  Specs are adequate, CPU i7 930, 16 GB ram, 2 7200 1 TB WD drives each, 1 WD 'green' 2.5 SATA 6 GB, an Intel SSD SATA2 M225 and a Corsair Force SATA 6, which is the 'new' drive C.

  First mistake, as mentioned above is:
  Log name: System
  Source: volsnap
  Date: 28/08/2012-06:46:26
  Event ID: 8
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Flush and hold writes operation on E: has timed out while waiting for a written statement of the volume control.
  The event XML:
  
   
     
      8
      2
      0
      0 x 80000000000000
     
      131589
      System
      mg - PC
     
   
   
     
     
      E:
      000000000200300000000000080006C 0000000000000000005000000000000000000000000000000
   
  

  Following error, which is quite common VSS:
  Log name: Application
  Source: VSS
  Date: 27/08/2012-22:38:52
  Event ID: 12341
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Volume Shadow Copy WARNING: VSS past seconds 0x000000000000002b try to rinse and keep the volume \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\.  This could cause problems when the other parts in the cliché of the time-out value for the phase of release-written, and it can cause the creation of snapshots to failure.  Try again when the disk activity is less can solve this problem.

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
  The event XML:
  
   
     
      12341
      3
      0
      0 x 80000000000000
     
      73849
      Application
      mg - PC
     
   
   
      0x000000000000002b
      \\?\Volume{51e5830d-560C-4D2F-9ed8-343e5dbe5b8c}\
     

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
      2D20436F64653A20434F524C4F564C4330303030303239302D2043616C6C3A20434F524C4F564C4330303030303233332D205049443A202030303030323632382D205449443A202030303030353532302D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820
   
  

  Following error - register cast handles
  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/08/2012 20:07:49
  Event ID: 1530
  Task category: no
  Level: WARNING
  Keywords:
  User: SYSTEM
  Computer: mg - PC
  Description:
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  The event XML:
  
   
     
      1530
      0
      3
      0
      0
      0 x 8000000000000000
     
      74995
     
     
      Application
      mg - PC
     
   
   
      Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles
  
   
  

  Next error - another problem of registry on the leak and be in use
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  Last error I hope - system boot or boot startup failed to load drivers
  The next (s) starting or starting system could not load:
  UimBus
  Uim_IM
  Uim_VIM

  I apologize for this long post, but I thought that some of them might be related, and I'd appreciate any help I can get like this had been a machine very good and fast until the last month or two.

  33000

  Hello
  The three files that does not loaded at startup proved a Paragon backup facility that I had deleted.  I found in the registry and is more had this error.

  Slow and sudden episodes of "not responding" continues in safe mode, safe mode with network and boot.

  Mr. Fixit noted that I had too many programs loaded on startup that I already knew and will work hard to stop.  It has been useful in this gave me a list of the programs that did not need to start.  Some of this list was a distant base such that suggests my AV does not need to start, but some of it was useful.

  I then started to keep track of programs that seemed more likely to slow down or freeze the machine.  I reduced to one of my drives 3 1/2 inch WD 7200 and my 25 M Intel SSD.

  I ran Intel SSD toolbox and it showed no errors and no updates.  Estimated of life was about 95% and I had the car for 2 years.  There is an option to click that says "SSD Optimizer", and I suspect it is similar to a manual pad because it is one of their first records.  I "optimized" and it was immediately faster.  Intel said to do once a week or two and I never did.

  I ran HD Tune Pro on the WD and it showed a bad CRC so that a warning on the drive, which is less than a year. HD air said the drive is bad OR a cable is bad.  I had a backup, Acronis Disk which took most of the data and I also had the cloud with versioning backup.

  Knowing that the food had been replaced by a technician who had twisted power cables, because most of the readers had been asked in reverse, I attacked this first.  I turned every drive so that the connection of the power supply has been on the same side and reconnect the cable after doing my best to straighten out and flatten the wire.  I then installed a new SATA cable on the WD drive in question.

  Then, wanting to be done with it once and for all and ensuring that I could save between Acronis and my backup of cloud, I used the command line in Administrator, then to Drive E tools mode, error checking.  I ticked the boxes: analyze and attempt to recover bad sectors and automatically fix file system errors.  A reboot and the process had started.

  When you are finished, I seemed to have a catchy machine and some of the programs which often hung, is done in two days.  Programs were pretty much intact, but most of the files had been erased from the disk.  I have restored all wiped files and files of Acronis and the cloud and everything seems to work perfectly.

  Unable to help me, I ran HD Tune Pro and made a mistake (not fast) full scan on the E drive.  She came back without error.

  I know that this drive can fail again, and above all, I couldn't have been this aggressive if I had not had 2 backups.

  Do you think it will fail again?  I decided that, if so, I'll get another SSD (or two) to replace.  Although it will cost you much, I fear that hard drives are not very well made and I don't want to go through this again - and maybe not be so lucky.

  Thanks for your help and I'll post again if it fails in the near future.  Someone knows something about the new SSD Plextor?  Or would you go with Samsung?

  Thanks again.

• Question/AppMonitor performance impact

  Hello

  I installed the AppMonitor for a list of the 20 process. Is a comercial product and process control the State of the recovery and begin the process.

  I know he uses between 5 and 10 seconds to start again.

  My question is:

  I could put the quick check at 2 seconds with minimal use of resources or of this change will have an impact in the monitored host or in the FMS?

  Best regards

  David Fernandez

  The best practice is to configure the Foglight agents to collect less frequently than the maximum expected collection time.

  If the agent takes 5-10 seconds to collect the parameters, the frequency of collection must be set no more frequently than every 15 seconds. In general, I wouldn't recommend the AppMonitor agent configuration to collect more frequently than every 30 seconds.

  More frequent collections impact use of resources on the monitored host and, to a lesser extent, the FMS.

  As the agent of AppMonitor will be off sustained next year, it would be a good idea to validate the Infrastructure Officer for process data collection. If ICR agent doesn't have all the features you need, the earlier, these requirements are reported, the better.

  Kind regards

  Brian Wheeldon

• Reg: Oracle audit regular performance impact

  Dear all,

  Oracle Database 11g R2 11.2.0.1 SE1

  Currently in the development database, I activated the regular audit on SELECT, INSERT, UPDATE, DELETE for about 10 (more accessible) tables on 140

  The growth rate of aud$ table is about 100 files per minute (on average) and the DB is accessible by 20 people simultaneously.

  I also planned the DELETE task for aud$ table every night at 12:00. (Delete rule-> SYSDATE - 2)

  This audit decreases the performance of the database when I implement the same production?

  If all this, I want to stop an audit anyway, not the bug (Bug 1257564: noaudit does not turn off auditing database.) avoid me by doing this, since I've found the fixed version of the bug in oracle support.

  Guide to in this regard.

  Hi malfoy

  I suggest strongly that you to check the following documents concerning the Audit of the Oracle performance problems

  http://www.Oracle.com/technetwork/products/Audit-Vault/learnmore/TWP-security-auditperformance-166655.PDF

  However, it is very rare that someone has faced the bug you mentioned, and the only way to solve it is to raise SR Oracle support

  ----------------------------

  Best regards

  Kamran Aghayev has.

  Personal site removed by moderator - this is a violation of the terms of use of forums - include only personal website in your profile details *.

• Client Server application performance impact due to the strong issue of retransmission of TCP packets

  People,

  I'm having problem of performance of serious application with my vSphere environment where I deployed a couple of database SQL Server stand-alone VMs (4 x VM) to be used by some applications virtual computers servers (4 x stand alone VMs) running Oracle Forms (Java) servers. Users connect from their own workstation to various geographic locations in Asia, the data center is in Australia.

  User (150 users of workstations Win7) - RDP-TCP/3389-> Terminal Server VM pool (one of the 45 x VM available) -Oracle Forms app TCP/80-> Application Server HTTP -SQL Server TCP/1433-> SQL Server VM.

  Somehow, report of the team of the network there are some consistent event TCP retransmit the packet between the Application Server to the database, as well as between Terminal servers.

  the accident occurred in any type of scenario same ESXi host or even different ESXi

  Material:

  HP BL 465c G7/G8 blades on c7000 enclosure

  HP Virtual Connect modules

  Software:

  vSphere U1 5.1 for all blades HP running ESXi and VCenter server.

  All terminal Servers Server (RDSH) and the OS: Windows Server 2008 R2 SP1 STD.

  Database: SQL Server 2005 and 2008 R2

  What could cause the TCP retransmission on the virtual environment?

  wreedMH, what kind of problem you encounter on your server environment blade HP?

  What I did:

  1 perform the update firmware on blade HP, ANC and also updated the drivers of ESXi for last October 2015 using HP SPP.

  2. upgrade to the last update of VMware ESXi 5.1 3 b build number 2323236.

  3. switch to level the latest VMware tools v10.0.5 after having done both above.

  4. follow VMware KB: big packet loss at the OS level invited on the VMXNET3 vNIC in ESXi small buffers Rx = 8192 and Rx ring #1 size = 4096

  
  

  Hope that helps.