vmrun clone: "operation is not supported"?

Similar Questions

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.

• vmrun return "this operation is not supported with the current permit.

  Hello

  I just installed the 5.1 esxi and I have 2 vm windows works well.

  I use the vSphere client to manage the hypervisor.

  I have not installed vCenter stuff, so it is just bare hypervisor os.

  When I ran the following:

  «vmrun t h 10.10.0.9:443 u vpxuser Pei xxx list esx»

  He returns with "this operation is not supported with the current permit.

  In fact, I have installed esxi5 on hypervisor licensing, do not know why I get this error message.

  Access the esxi5 through the sphere client works very well (I could create vm, take snapshots, etc.).

  Please let me know if I missed any steps. Thank you

  -antony

  Welcome to the community,

  with the free license of the hypervisor, access to vSphere API is restricted, which is most likely causing this issue. To unlock the API, you must have a paid license. Unless your host has already exceeded the 60-day evaluation period, you could try to revisit the evaluation mode to see if the command works as expected.

  André

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

  I am trying to import a virtual machine (composed of three .mf, hard, .ovf files), when I try to download the VM, it gets downloaded 100% in the catalogs, but gives an error "Cannot create" as condition to the end and when I check the error in detail, it gives me that "operations is not supported on the object.". Checked the Virtaul Center, I get the same error that 'operations is not supported on the object."in the taskbar. Google it a lot but could not find a relevant solution.

  Just for the record I have DRS activated in full auto mode and only in the aggressive State.

  Can someone help me what I can do to remedy the problem.

  There are two parts to the upload.

  5.5 download dialog box represents the progression to the record of transfer vCloud Director of the FVO.  The download method is via the integration of Client plug-in (which uses the OVF tool).

  If the pop-up window can 100% success, I think that the element of the catalogue shows 50% and tries to download files to vCenter/ESXi as an import job.  If the import job fails, then you need to investigate the newspapers of vCenter/ESXi side for more details.

• Virtual and models - computers cannot move the VM in the folder "operation is not supported on the object."

  Hey everybody,

  We are running vSphere 4.0. During the whole period that we used vSphere, we use vApps and Resource Pools hosts and Clusters to organize and manage the virtual machines used by our production team and test. From what I understand, this can be semantically incorrect (see: http://virtualizationreview.com/blogs/everyday-virtualization/2010/10/vsphere-folder-organization.aspx). So, I've navigated to models and virtual computers, created in folders with permissions of the user and tried to move their respective VMs to their folders... and I get the following error:

  "The operation is not supported on the object."

  So, should I go on the resolution of this or to leave things as they are?

  What are your opinions?

  Is there a right or wrong way to manage VMs of the multiple users?

  Thank you for your time and help,

  Johnathan

  Avinash21,

  Thanks for the tip.

  Move the virtual machines of the TIME solved the problem.

  When I suggest them to the root of the host, I was able to move in a user folder.

  Thanks again,

  Johnathan

• Reviews operations - the operation is not supported

  Hello

  I use vmware.vim api in a c# project. When I try to get the GuestAuthentication with AcquireCredentialIsGuest object, I get the following error:

  "A NotSupported server of type error with the message"the operation is not supported on the object."occurred during the requested operation operation."

  Orders are not disabled, virtualmachine, or on the host. I'm running out of ideas what could be wrong. Can someone help me?

  Code:

  GuestOperationsManager t (GuestOperationsManager) = customer. GetView (customer. ServiceContent.GuestOperationsManager, null);

  GuestAuthManager c = customer (GuestAuthManager). GetView (t.AuthManager, null);

  NamePasswordAuthentication userCred = new NamePasswordAuthentication();

  userCred.Username = "xxxx";
  userCred.Password = "xxxx";
  userCred.InteractiveSession = false;

  GuestAuthentication a = c.AcquireCredentialsInGuest (vm. MoRef, userCred, null);

  Thank you!

  Hi Méteron,

  If I understand correctly it train physicians AuthManager.AcquireCredentialsInGuest we are not allowed to use NamePasswordAuthentication with this method. Instead try to pass an instance of NamePasswordAuthentication directly to the method that requires authentication and do not GuestAuthManager at all.

  Hope this helps :-)

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• Equinum A100-337: Installation of an operating system not supported - 4033 Longhorn

  OK, I have an Equinum a100-337 and im trying to install another OS other than Vista.

  I'm editing of longhorn 4033 and im having driver problems, exactly the same thing that happens on windows XP

  It's not my BONE. I tried the chipset utility that corrects problems usb but I can't get my wireless card and the sound card to install even though ive got xp drivers. My sound card is not still appear in Device Manager.

  Here is a screenshot of http://i19.tinypic.com/42jfeah.png. Ive tried to install the wireless card, but he keeps trying to install the drivers for the controller 2xxxx although files inf for my wlan is it Intel® PRO/Wireless 3945ABG Network Connection. Realtek High Definition Audio Device

  sound card is not listed in the Device Manager and xp drivers so it will not install

  Any ideas on what I should do?

  Hello

  Generally, Toshiba does not support any operating system s that are not shipped with Toshiba laptops
  BUT there may be a small light at the end of the tunnel.
  As far as I know Longhorn is a new Microsoft OS Server which is not official on the market. (can I ask how you got this oS ;))
  The Longhorn supports parts of the Vista or free spoken is Vista with additional features.

  However, I think you should check out the Vista drivers available for Satellite A100 and Equium A100 series and possibly unique pilots will run

  Good luck

• OfficeJet 8710 Vista installation fails as operating system not supported

  I have a friend who just got an OfficeJet 8710 printer and software installation problems.

  She has a computer HP (listed as p6110y), 64-bit Vista Home Prem w/SP2

  When we try to install the software from the CD is States that the operating system is not supported. I went to the HP site and it detected running on Vista and downloaded the webpack_OJ8710_1881.

  A ran it and the same error, the operating system that is not supported. Tried running it as an administrator, even. Went into the temp folder to run the installer directly, even. Uninstalled the old 8600 printer, rebooted, tried the installation, same error.

  Wireless printer and * not * connected USB.

  What else can we try?

  Thanks in advance,

  Hello

  I suggest you to contact the retailer and replace the printer with a different model, the 8710 is not compatible with Vista 64 bit

  You can find the specifications of the product below:

  Minimum system requirements
  Windows Vista: (32-bit only)http://store.hp.com/us/en/pdp/printers/hp-officejet-pro-8710-all-in-one-printer-m9l66a-b1h
  

  Shlomi

• When you try to run Microsoft FixIt XP, get message 'operating system not supported.

  I am running Windows XP, IE 8. I always used Microsoft Fix - it for the problems I encountered. Today, it is telling me my operating system only is not supported. Why, when nothing has changed on my end?

  Hi Ladybug!

  Given that the problem is related to Microsoft Fixit, you can post your query on the Forums of Microsoft Fixit. Please see the following link for the same.

  Microsoft Fix Center - NO support general questions Forum

• Non supported configuration of virtual machines for the fault tolerance. The operation is not supported on the object. When activating FT

  Hello

  I try to activate FT on a virtual machine that AFAIK ticked all the boxes for FT but I get this message when activating it. No clue as to what might happen or where to connect for extended information? This error message is too generic...

  Thanks in advance mates.

  Did you follow KB1019165-fault tolerant to fails to 42% with the error: not supported configuration of virtual machines for the fault tolerance

  André

• operating system not supported error message

  I try to install InCopy on a XP machine service pace 3 with 2.34 GB of RAM... I get a message that the operating system is no longer supported and the installation does not start.  What gives?  The machine seems to meet the specifications of Adobes for installation.

  Trying to install CC... called customer service... they said inCopy will not install on XP, so I spent the last 5 hours to do a clean install of Windows 7 (64-bit) and I should be good to go now...

  Thanks Jeff...

• Impossible to install Illustrator - operating system not supported even if it is on the list

  When I try to install Illustrator it says that I can not download it because Illustrator does not work on my operating system and verify the system requirements.

  I'm on Mac OS X 10.6.8 located on the list of supported operating systems. I updated the software and I restarted, without success. I also managed to install and run the trial version for a month without any problem.

  Help please!

  What version of Illustrator? If it's CC, then you need Adobe Application Manager, also called creative cloud. All of the CC downloads arrive via this application.

  Otherwise, there's always: http://helpx.adobe.com/contact.html