VMWare at the request of the USB

Similar Questions

• Access to the BlackBerry through the USB port on the virtual machine VMWare

  I have my development environment configuration in VMWare virtual machine, and I have no problems of deployment of BlackBerry applications on a simulator that runs as another virtual machine. The problem starts when I try deploying to the device via the USB port. The address is assigned when the mode of development on the device is not accessible from the VM, but only from my host, who do me any good, since as I said my IDE is in the virtual machine. A way to solve this problem? I can still deploy to the device via wi - fi (which is btw access via different ip - one given by the network) by this can sometimes be slow depending on the strength of the signal, etc, so I prefer to be able to deploy via the USB port.

  Just in case anyone has the same problem, how to activate must, VMWare Player click on the USB icon (to the right) and choose to disconnect from the host. Connecting the USB port at the prompt. Stupid...

• Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed.

  Separated from this thread.

  Hello

  I'm faced with the same question. I went to settings of your laptop and ran the recovery, but it did not help. I went to Device Manager and I noticed an error: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed. Tried to fix that with an alternative of Microsoft Community (http://support.microsoft.com/mats/hardware_device_problems/?wa=wsignin1.0), but the issue could not be resolved. I don't know if they are related, but I think so. Spent so much time trying to solve this problem and would be really grateful for the help. Have had the computer for less than 3 weeks...

  Ewa

  Hi Ewa,

  Thanks for the reply.

  I suggest you to update the drivers for the chipset of your computer and check if it helps. You can use the link below. Select the appropriate component and the operating system from the list. The link given below is for Lenovo 11 2 yoga, if you have any other device then please provide us with the exact model number or select the correct model number.

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-2-11-notebook-Lenovo?c=1

  As you mentioned that the other two USB ports work correctly, according to me is not a problem with the driver. It seems to be a hardware problem.

  Let us know the status.

• Start the USB VM in Vmware 6

  Hello everyone, sorry to bother you to all.

  Searched for an answer to this, I can't seem to find a. I'm trying to start windows server ISO 2012 from a USB connected directly to the host. I set up the usb controller and added the usb device. It is recognized. I'm not trying to get my VM to boot from USB but I can't start it. I tried tinkering with EFI and Bios but can't seem to get the USB to boot at all. Please can someone give me step by step instructions on how to do this? I feel as if I had just missed something simple...

  Thank you very much for your time!

  CTRL Alt Del after connecting the unit! I have it! Thank you!

• Qosmio F60 - 10K: Win 7 64 bit recognizes all the devices connected to the USB

  Hello

  I have a problem. I do not know this first run my Toshiba which was before 6 months or since...
  Some USB are recognized some are not, but many not a few USB are recognized I mean on USB, External hard drive USB too.

  I have 2 USB hard drive is recohnized 1 is not, btw... when I run Vmware XP he acknowledged all USB and my external hard drive all but in windows 7 a few USB are recognized, some are not...

  He finds something is attached to the USB but then don't say no driver, I tried it on other Windows 7 on another computer working USB and HDD external but my Toshiba Windows 7 64 bit doesn't work, btw... USB are good because when I turn on Vmware running :((

  And why I have no drivers on the support of the pilots then say no product, btw... Driver F60 - 10 K page no longer exist!

  Thank you, vfranges

  BTW... Sorry on English xD

  Hi vfranges,

  I put t have problems with the USB ports, but according to some other discussions here in the forum I recommend you to update the chipset driver.

  You can find the latest version on the Web from Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  Check this box!

• What is the MTBF for the USB-6009 case

  What is the average time between failures (MTBF) for the USB-6009 case?

  Hello

  Unfortunately, there is no available for the USB-6009 case MTBF.  In order to retrieve this information, there is a cost for our R & D department.  If you need this number, please contact your local representative OR or open a service request to ni.com/ask.

  I apologize for the inconvenience.

• Problem with connecting to the usb storage to the EA4500 via ftp from the internet

  I have trouble to configure my EA 4500 as an FTP server.

  I followed all the instructions according to the manual, but cannot access the USB I connected tot the EA4500 of the internet.

  When I try to connect my own network, everything works fine.

  The configuration I have at home is as follows:

  Cable modem ISP--> EA4500--> all computers.

  As said, I use the EA 4500 as an FTP server.

  If I install an FTP server on one of the computers on my home network and transfer the correct port on the EA4500 for this PC everything works fine and I have access to the internet. Unfortunately, it won't work when using the USB plugged into the EA4500...

  Any help would be great!

  TIA!

  When you go to the EA4500 configuration page, have you enabled the FTP server function?

  When I set mine up, I have was go the section when you set up the USB (shares, etc.) and turned on FTP.

  In the security of the router Security tab, I uncheck the 'Block anonymous Internet requests.

  I do know for sure that you have to uncheck this box, but I always turned off this box, just out of habit when setting up a llinksys router.

  In any case, this is what I did and it worked fine.

  The only other thing I can think is... Your modem is perhaps a nat router. And you have the EA4500 operating on a different subnet. And your modem may possibly be block it.

  What is the brand and model of your modem.

• By getting Unattended.XML file not recognized when booting from the USB key dvd

  I have prepared without supervision. XML file and put it in the root of the USB stick and kept Windows 7 OEM DVD player. Mentioned the path of the file catalog in unattended mode. XML. active all USB ports in the BIOS settings. But without surveillance. XML file is not acknowledged at the start. What could be the possible problem here? Can someone help out me?

  Hello

  Please contact the Microsoft community.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/82410df7-2e70-47C7-a9dc-7dba7c17fbf8/autounattendxml-will-not-load-from-USB-HDD?Forum=w7itproinstall

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Windows detects the USB device slowly.

  Separated from this thread.

  I have this problem on a Panasonic F1 - GZ Toughpad. It has a USB 3 port. It has 8 GB of memory, less than half used and it works my a request.

  The USB device is a FTDI USB KEY. This is a feature of full speed USB 2 (12 MB/s) according to the data sheet.

  When I plug a FTDI USB - KEY, it takes several seconds to detect the USB STICK. Also, it takes several seconds to detect when the USB STICK is disconnected.

  However, when I plug in a hub USB, plug the USB STICK in the hub, the detection is less than a second and the detection to be disconnected is less than a second.

  I can't use a USB hub as a work-around, because it is a portable application. Perhaps some of you could use a hub as a workaround. ... If someone has an answer to reduce response time, please let me know.

  The problem was solved by changing the parameters of the Toughpad BIOS for USB 3.0 to 2.0. Now the Toughpad detects the FTDI USB KEY in<1>

  Please note in the previous post, the USB hub is powered and the FTDI USB KEY is not memory flash, it's a serial USB port with a serial number, but only the serial number is available.

• BlackBerry Smartphones to Blackberry Manager devices to display the USB PINS

  My Blackberry Bold 9000 is not recognized by my office blackberry Device Manager.  After hours of playing around to try to solve this problem, here is what information I can provide.

  My desktop and laptop running Vista 64-bit.  I had no problem installing the Desktop Manager on my laptop and cable, updated processes, etc. all work fine.  In my view, this allows me to isolate the desktop and not the device or the cable. The Desktop Manager software is to date on both systems.

  When I try to get the Blackberry device manager to recognize my camera on my desk, in the table options of connection under connection, that COM1 is displayed, Disable stateful shown.  USB-Blackberry 9000 (Paperback) appears on the laptop.  I've hunted around these tips and google for a solution to this problem, but I have not yet found one.  Under the Windows Device Manager, "Blackberry Smartphone" is listed under USB controllers when the unit is plugged, and the drivers are updated according to the instructions on these cards.

  The functions of USB ports for the operation of the keyboard, mouse, and external storage.  I tried to connect to all six USB ports in the back and two on the front of my office, without result.  When the device is connected to my desktop computer, Windows recognises the Smartphone and SD card separately as mass storage devices - with the phone powered on or off mass storage device option.

  I have a feeling that this would be resolved if I could get the Blackberry device manager to display a USB instead of COM1 port.  Someone at - it solutions?

  Hey this is my solution... it worked perfectly for me, and oddly enough, this is a difficulty for VMWare (also the difficulty to detect USB devices)

  Try to right click on one of the USB hubs (in Device Manager) and looking at the details of the driver. If usbfilter.sys is in the list then open your registry editor and navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class {36FC9E60-C465-11CF-8056-444553540000} and remove the UpperFilter, pair of usbfilter.

  I restarted after making this change, and it works fine now.  Its the first time in the month that I could plug my Curve 8900 using my USB on my PC 64-bit of Windows Vista (now Windows 7).

  KUDO to the population of VMWare for this solution.  Thank God, she also fixed for my BB Desktop Manager! WOOT WOOT!

  Here is a link where I found this solution

  http://BX.BusinessWeek.com/consumer-arbitration/view?URL=http%3A%2f%2Fcommunities.VMware.com%2Fmessa...

  Merry Christmas everyone

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• Animate the CC of the tests on the device via the USB port or the publication of device does not

  Without a paid with Apple Developer account (waiting to have in fact my first AIR for iOS app works correctly), I created the .mobileprovision and .p12 files successfully in Xcode. With these I figured out how to debug in the Debug of Animate version iOS Simulator > DebugMovie > iOS Simulator but I can't debug my device (iPhone) via the USB port. ("Impossible to install the application. Make sure that the selected devices are connected. ") Connected and on. No problem with the available memory.

  Past the other road, I published with success (he said) but my iPhone will not complete downloading the app in iTunes and even less using the 'post publishing' check in settings to install on my selected iOS device of publication. It is there no dialog, no explanation why... simply "the application was published successfully."

  I moved the .ipa file in iTunes and on my device. It says it is syncing but then goes with anything. I once accidentally dragging the icon of my iPad where it has at least tried to install it. The dimmed icon appears on this device with "install...". "below, but it was not built for the iPad, so I trashed it after a few hours.

  I have watched the video of Adobe and don't see what I'm doing is different.

  In Xcode, there is a window of devices. You can select your iPhone and check requests in this regard. Try dragging the IPA in this list. It may still fail, but I hope that Xcode will give a better error message.

  It is a faster way to much to get applications on devices using iTunes. If it does not copy OK you can then try remote debugging in Animate and then open the application. The IP address of your computer, you must have this ready to type in.

• Impossible to have exceptions to access to the usb port?

  When you try to use VMWare group policy to disable access to the USB port, we are unable to add exceptions to certain devices. We have added the VID/PID in the peripheral "include VID/PID" parameter and the device will be mapped is no longer up to the user vm session. If we close this group policy setting off, the user is then able to use the usb device?

  The include parameter is case-sensitive and the value must be entered in hexadecimal format, I know who gets people.

  https://www.VMware.com/files/PDF/Techpaper/VMware-horizon-view-USB-device-redirection.PDF

• ESXi 6 - unable to connect the USB device to VM

  Hi people:

  I have a problem with a specific USB 3 device to try to connect to a virtual computer.  The device is a Toshiba USB 3 5 TB hard drive, and it is recognized by ESXi I see when I do a lsusb command, but it is never offered as a choice available to connect to a virtual computer.  I tried to restart management agents, restart ESXi with the connected device so that it is immediately detected at startup.  I tried using the web client to vcenter server appliance and the native client C.  She just never appears as a choice just as if it is not there.  Other USB 3 devices, including a Startech gigabit network device and another 2 TB Toshiba USB drive appear as a choice, so it doesn't seem to be a problem with USB 3 devices as a whole.  I have connected to other computers and even an Arch Linux VM under the same ESXi which has a Startech USB 3 connected via PCI Passthrough controller and it works in all places.  I tried to connect to a USB 2 port just for the heck of it, and I got the same result (invisible to virtual machines) here is what information I have via the newspapers.  I see a few entries on the device being suspended in the vmkernel journal, but I don't know if it is normal for a device until it is assigned to a virtual computer.

  Any ideas what is wrong or how to fix welcome.

  lsusb

  lsusb [root@naplesesxi:/var/log] Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Bus device 004 008: ID 0 b 95:1790 6 Electronics Corp. AX88179 Gigabit Ethernet Bus device 003 003: ID 2109:2811 Bus 004 Device 007: ID 2109:8110 Bus 002 Device 012: ID 1058:1003 Western Digital Technologies, Inc. Elements 1000 GB Bus 007 Device 002: ID 059b: 0277 Iomega Corp. Bus 004 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS Bus 002 Device 003: Hub 4 ports ID Genesys Logic, Inc. 05e3:0610. Bus 004 Device 002: ID 0781:5583 SanDisk Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [root@naplesesxi:/var/log]

  lsusb detail

  [root@naplesesxi:/var/log] lsusb - v d 0480:d011 Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Device descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (defined at the Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0 x 0480 Toshiba America information. Systems, Inc.. idProduct 0xd011 bcdDevice 6.07 iManufacturer 1 TOSHIBA

  iProduct 2 external USB 3.0

  iSerial 3 20140426016164

  bNumConfigurations 1

  Configuration descriptor:

  bLength 9

  bDescriptorType 2

  wTotalLength 44

  bNumInterfaces 1

  bConfigurationValue 1

  iConfiguration 0

  bmAttributes 0xc0

  Self-powered

  MaxPower 2mA

  The interface descriptor:

  bLength 9

  bDescriptorType 4

  bInterfaceNumber 0

  bAlternateSetting 0

  bNumEndpoints 2

  bInterfaceClass 8 Mass Storage

  bInterfaceSubClass 6 SCSI

  80 bulk bInterfaceProtocol only

  iInterface 0

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 81 EP 1 IN

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 02 EP 2 OUT

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Object store binary descriptor:

  bLength 5

  bDescriptorType 15

  wTotalLength 42

  bNumDeviceCaps 3

  Functionality of the USB 2.0 Extension device:

  bLength 7

  bDescriptorType 16

  bDevCapabilityType 2

  bmAttributes 0x00000002

  Link Power Management (LPM) taken in charge

  Feature of the superSpeed USB device:

  bLength 10

  bDescriptorType 16

  bDevCapabilityType 3

  bmAttributes 0x00

  wSpeedsSupported 0x000e

  Device can operate at full speed (12Mbps)

  Device can operate at high speed (480 Mbps)

  Device can operate at SuperSpeed (5Gbps)

  bFunctionalitySupport 1

  Fully functional low peripheral speed is Full Speed (12 Mbps)

  bU1DevExitLat 10 micro seconds

  bU2DevExitLat 2047 micro seconds

  Functionality of the device ID container:

  bLength 20

  bDescriptorType 16

  bDevCapabilityType 4

  Want 0

  ContainerID {14c4c0cc-6785-495d-8dcb-c74305d84121}

  Device status: 0x0001

  Self-powered

  [root@naplesesxi:/var/log]

  VMkernel when pluggin installed in drive

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB drive found, idVendor = 0480, idProduct = d011 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB device strings: Mfr = 1, product = 2, SerialNumber = 3 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: product: external USB 3.0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: manufacturer: TOSHIBA 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: serial number: 20140426016164 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0x81, slot 12, new flags drop id = 0 x 0, add new flags = 0x8 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0 x 2, location 12, new flags drop id = 0 x 0, add new flags = 0 x 18 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4302ab3e2bc0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: new context of input control: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: exit after config context successful ep cmd: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: name of the vendor: 0 x 0480, product: 0xd011, revision: 0 x 0607 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: Interface subclass: 0x06, Protocol: 0 x 50 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) WARNING: LinScsiLLD: scsi_add_host:573: sgMaxEntries vmkAdapter (usb-storage) rounded up to 255. Indicated size was 65535 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) LinPCI: LinuxPCI_DeviceIsPAECapable:581: device capable of EAP at 0000:00:14.0

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) DMA: 646: DMA 'vmhba50' engine, created using the Mapper "DMANull."

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb-storage 4 - 4:1.0: interface is claimed by usb-storage

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: device is not available for passthrough

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: usbfs: registered usb040b

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > hub 4 - 0:1.0: suspended

  2016-03 - T 02, 20: 04:23.349Z cpu0:32819) ScsiNpiv: 1505: GetInfo for adapter vmhba50, [0x4301a7966240], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  2016-03 - T 02, 20: 04:23.493Z cpu5:33105) < 6 > xhci_hcd 0000:00:14.0: xhci_hub_status_data: port polling station.

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:34.056Z cpu6:33107) < 6 > usb-storage 4 - 4:1.0: suspended

  2016-03 - T 02, 20: 05:15.869Z cpu4:162661) < 6 usb transfer > disabled

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.150Z cpu1:162688) < 6 > usb transfer enabled; all eligible devices will be claimed by the kernel drivers

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3551: device rescan time 8 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3554: Filesystem probe time 11 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.292Z cpu2:162691) ScsiScan: 836: vmhba0:C0:T0:L0 Path supports the REPORT LUN 0 x 11

  2016-03 - T 02, 20: 05:27.898Z cpu3:162776) CMMDS: CMMDSVSIUpdateNetworkCbk:2150: RECONFIGURE interface vmk3 with cmmds (success).

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:28.512Z cpu4:162776) Config: 680: "SIOControlFlag2" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 05:32.679Z cpu0:162776) Config: 680: "VMOverheadGrowthLimit" = 4294967295, old value: 4294967295, (State: 0x0)

  2016-03 - T 02, 20: 05:34.612Z cpu6:162983) FixedMem TPM: start = 0xfed40000, end = 0xfed44fff, 0 = write protection

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) World: 15514: VC opID HB-SpecSync-host-9@0-3fda4c20-7-209f maps to vmkernel opID 73 a 64522

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) World: 15514: VC opID HB-SpecSync-host-9@0-799bbb99-81-212f maps to vmkernel opID 478d4c8

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  Hi guys, I just had the same issue and it resolved on my test environment.

  I got the device ID using "lsusb".

  Bus 004 Device 002: ID 0480:d011 Toshiba America information. Systems, Inc..

  where 0480:d011 is the device ID

  Then ran the following command:

  oddities s esxcfg-module = 0480:d011:i usb-storage

  After a reboot I was able to cross the device for my VMs.

  I'm not an expert in this field, as far as I can understand of this thread: problem mit USB Passthrough (eine andere nicht, geht HDD) - to vSphere5 / ESXi 5.0 5.1 - VMware Forum und "usb-storage" module crashes when you try to access the drive and does not pass through to the arbitrator of the usb. The person in this thread turns off the usb storage but I boot from USB and so I couldn't do it. Steal the idea of this thread: zero calorie tech deals: VMFS formatted USB sticks in VMware vSphere 5.1 I could exclude the USB from the usb-storage module device (I think).

  I have not tested how this affects other features, but initial test is positive.

• How to start a client of the USB?

  Hello

  I'm trying to start a client vmware linux from a usb key (which has an installer of linux inside).

  I can create a host controller and a usb device. When I start the system, that the USB is connected to this client computer.

  But I never managed to boot from usb-stick, the boot process * still * trying to get a response from a dhcp server. When I go to the bios Setup, I can only select a device "removable", until now, I didn t find any usb device to start.

  Is usb-boot possible on esxi or should I try a workaround?

  concerning

  It may be worth trying Plop Boot Manager 5.0 to see if it works with your distribution of USB.

  André