VMware Player keyboard mapping problem

Similar Questions

• Keyboard mapping problem caused by the virus.

  Recent activity of the virus, an exe PC Tools, which followed without his knowledge, was opened and loaded. The removal of virus has been resolved by Norton but left the PC with keyboard problems. Some keys on the keyboard will power off the computer, restart in safe mode. As 'f' keys, ctrl, entry etc... but not all the time.  PC works fine, but having trouble isolating the way to replace the keyboard map and see if it cures the problem. After that a complete scrub and the download of the original with better security software! Thanks for help

  Hello

  1. What is the serial number and model of the keyboard?

  2. is it wireless or wired?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem persists.

  http://support.Microsoft.com/kb/258826

  Hope this information helps.

• weird dreamweaver keyboard mapping problem

  weird problem of dreamweaver keyboard mapping:
  
  I hope this solution helps someone out. If you have q, ask and I'll try to help.
  
  I had a weird problem in dreamweaver... Whenever I was in code view and typed 'Shift + i' to a capital "I", it would be rather to paste from the Clipboard.
  
  I finally understood what was going on. I compared the menu.xml in my app support folder in the user's library to the original menu.xml file which was in the application. I went through until I stumbled upon the diff:
  
  
  menu.XML in my library/application support folder:
  <! - Navigation Windows shortcuts - >
  "< shortcut key =" Cmd + Ins "name = 'copy2" platform = "" command = "if (dw.canClipCopy ()) {dw.clipCopy ()}" domRequired = "FAKE' id = 'DWShortcuts_HTMLSource_Copy2' / >"
  "< shortcut key =" Shift + Ins "name ="Paste2"platform =" "command =" if (dw.canClipPaste ()) {dw.clipPaste ()} "domRequired =" FAKE' id = 'DWShortcuts_HTMLSource_Paste2' / > "
  "< shortcut key = 'Shift + delete' name = 'Cut2' platform =" "command =" if (dw.canClipCut ()) {dw.clipCut ()} "domRequired =" FAKE' id = 'DWShortcuts_HTMLSource_Cut2' / > "
  
  
  Orig menu.xml file:
  
  <! - Navigation Windows shortcuts - >
  "< shortcut key =" Cmd + Ins "name = 'copy2" platform = "" command = "if (dw.canClipCopy ()) {dw.clipCopy ()}" domRequired = "FAKE' id = 'DWShortcuts_HTMLSource_Copy2' / >"
  "< shortcut key =" Shift + Ins "name ="Paste2"platform =" "command =" if (dw.canClipPaste ()) {dw.clipPaste ()} "domRequired =" FAKE' id = 'DWShortcuts_HTMLSource_Paste2' / > "
  "< shortcut key = 'Shift + delete' name = 'Cut2' platform =" "command =" if (dw.canClipCut ()) {dw.clipCut ()} "domRequired =" FAKE' id = 'DWShortcuts_HTMLSource_Cut2' / > "
  
  
  There is a diff in the 'platform =' tags. The orig said [platform = "win"], my config said [platform = ""] (Nothing in between the "of"). So, I reset the tag platform to be [platform = "win"] in my settings and then revived dreamweaver. It corrects the problem.
  
  Don't know how this happened, but it works now.

  weird problem of dreamweaver keyboard mapping:

  I hope this solution helps someone out. If you have q, ask and I'll try to help.

  I had a weird problem in dreamweaver... Whenever I was in code view and typed 'Shift + i' to a capital "I", it would be rather to paste from the Clipboard.

  I finally understood what was going on. I compared the menu.xml in my app support folder in the user's library to the original menu.xml file which was in the application. I went through until I stumbled upon the diff:

  menu.XML in my library/application support folder:
  
  
  
  

  Orig menu.xml file:

  
  
  
  

  There is a diff in the 'platform =' tags. The orig said [platform = "win"], my config said [platform = ""] (Nothing in between the "of"). So, I reset the tag platform to be [platform = "win"] in my settings and then revived dreamweaver. It corrects the problem.

  Don't know how this happened, but it works now.

• Installation of Browser-Appliance in VMware Player 10.0

  Hello

  I am new to the use of vmware and I'm having hard installing 10.0 Firefox Browser-Appliance in VMware Player.  The problem is when I go to create a virtual machine and try to give a path where one can read '(iso) installation disc image file' but it comes up with "file not found" and "no operating system found".

  I even have difficulties to find the path when I unzip the file Browser-Appliance 10.0, I did successfully for a few months but when when I went once again I couldn't remember how to do it.

  Any advice will be highly appreciated.

  The browser is ready for use, so you don't need to "create" any virtual machine!
  Instead, once you have unpacked the 7 - zip package, you select 'Open a Virtual Machine "and find the file Browser - Appliance.vmx .

  Then click on 'Open' and finally 'play Virtual Machine '.

• keyboard does not (driver is loading don't not with the error code 38) after upgrading to VMWare Player 6.0.6 or 7.1.0

  Hi all

  Host: DELL M3800, Windows 8.1

  Since the update to VMware Player 6.0.6 (or 7.1.0) Windows is not loaded (error code 38) keyboard drivers.

  The device HID\VID_046D & PID_C313 & MI_00\7 & 362ebef & 0 & 0000 had a starting problem. (Pilot: keyboard.inf, problem: 0 x 26).

  I had no problem with previous versions (VMware Player 6 to 6.0.4).

  If I uninstall VMWare Player, Windows correctly loading the keyboard drivers.

  Now, if I reinstall the earlier version of VMware Player, Windows does not load properly (error code 38) keyboard drivers.

  Can you help me?

  Thank you

  Guillaume

  The problem is caused by the VMkbd.sys driver.

  You can find the "best" solution for Usb keyboard problem

• VMWare Player 5.0.2 does not start with Bluetooth keyboard connected

  Hello

  I use VMware Player 5.0.2 on a host Windows 8.

  If I have a Bluetooth keyboard connected to the host, no virtual machine will start. I get the same error every time:

  "cannot find a valid peers to connect to.

  But if I take the keyboard away, then Bluetooth starts just fine.

  Guest operating systems are Vista and Windows 2003. They are all the same in this regard - the same error.

  The error occurs really fast - to the extent that the log files are not updated.

  Latest version of VMware tools is on the guest.

  Any help appreciated gratefully. I can't use the machines without a keyboard, and it's on my tablet computer that I need to be portable. Please note that the issue here is with the keyboard, if there is no Bluetooth keyboard machines act as they should.

  TIA, Pete

  This problem is now resolved.

  My initial assessment was wrong. The problem was to be able to. If I was running the computer on battery, all clients VMware crashed with various strange errors at startup. If the host is plugged into the power outlet, everything works as it should.

  Obviously, on battery, my computer shuts down some capabilities of the processor. Only at full power is everything what it.

  For others who might have the same problem:

  Acer Iconia W700 Core i5, 4 GB RAM, 128SSD. Power to factory settings.

• Aspire mapping problem keyboard V5-572P-6646 - the high number Pad bad keys

  Sent my V5 in service after the failure of the screen.  At upg'ed WIN8 to WIN10 before breaking the screen.  Sent in for repair.  They replaced the screen very well, but erased from my hard drive and installed WIN10. (why would they wipe my HD if they are just going to leave the same OS on it?)

  Now I'm having a problem with the keyboard mapping for the top row (INS, DEL, HOME, PG UP, PG DN) are all wrong.  The feature seems to have moved 1 key to the left where he should be.

  Figuratively, it must be a driver issue, but I can't seem to find the drivers of keyboard online for the V5.

  Any help would be appreciated!

  See if it will take care of it.

  http://SharpKeys.codeplex.com/

• problem of graphics screen in OSX Mountain Lion - VMWare Player on Windows

  WIndows 7 or Windows XP, when you use VMWare Player with Mac OS X Lion mountains or the Mavericks, there is a problem of graphical layout.

  I noticed this twice already:

  1. in the system preferences when you try to change the personal image for users and groups. You can see your own image, but trying to change the image of the drop-down list page shows only a blank page. Nevertheless, he is content. When you tic on the blank page, you can change the image, but without visual reference.
  2. I tried iWeb Design in Mac OSX Mavericks. The same situation. By choosing a layout you see a blank page, but it is contained. Try adding that an image or a text always results in a blank page on the screen.

  No idea how to solve this problem?

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine cannot be done when done in the Apple brand hardware but when done while running under OS X and for that you have VMware Fusion of VMware Player/Workstation or you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

• VMware player 5 - connection in bridge problem

  Hi all!

  I am writing because I have a very big problem with the network bridged in Vmware player 5.0.2. No matter what I do it just would not work. NAT and host options only work very well and there is no problem with them. My NIC has vmware bridge Protocol, 'automatic connection settings' and "virtual network editor" is set on this particular card. The only thing I can think is firewall (Norton 360) that can block the connection but all of the vmware software components are allowed to work and NAT service works, so I don't know if this could be the case. I would be very grateful for any advice.

  I have attached the PDF with screenshots showing my configuration. 

  
  

  Norton PS options are in Polish, but they essentially say that Vmware is allowed and that inbound netBIOS' / netBIOS name "communication and communication incoming/outgoing ICMP is blocked.

  P.S in case of faults of vocabulary and that I'm sorry. p

  No, NIC in the host is virtualized / ripped off by the monitor of machine virtual and presented to the customer in a standard way - always cable.  It doesn't matter if the host is using wired or wireless.  Was just letting you know that you can use specific tools wireless in your guest on a virtual NETWORK adapter in this way.  The only way to get into a wireless client is to use a USB wireless adapter and attach that to the guest.  There will of course have to then the drivers for the USB NIC you use.

• Problems with VMware Player

  Can someone help me please?

  I have two questions, but here's the background. I run a virtual machine using VM Player with Enterprise Server 2008 x 64 as my OS and Windows 7 on the client system. The version of the player that I use is the 3.0.1 and am not able to upgrade to a newer version that the virtual machines created on the new version won't be compatible with the rest on 3.0.1.

  Question 1: I get the following error message:

  "Could not get the driver vmci version: the handle is invalid.".

  You have an incorrect version of the driver 'vmci.sys '. Try reinstalling VMware Player.

  Power DevicePowerOn module has failed. »

  I uninstalled the software and reinstalled again, download the software from vmware download sit and still get the same error message. I also entered in the configuration of the .vm file and changed the settings vmciio:present from true to false. Should I do this?

  Question 2: Now the virtual machine is not recognizing the CDROM. I tried to use the real player allocated on the client system and also let the virtual machine automatically select, the two ways fail. I looked through other forums that show screen shots of how to fix this problem, unfortunately the screen with what I presented is different from that in demonstration.

  Any help would be fantastic, thank you.

  Welcome to the community,

  I don't know, but what you can try is to:

  1st edition.) Can you confirm you changed the setting vmci0.present = 'false' with the virtual machine properly closed - not suspended - and VMware Player closed.

  2nd edition.) In settings of the virtual machine CD-ROM, click on the button "Advanced...". "and enable"Legacy Emulation"see if that helps.

  If the above does not help, please report (attached) file vmware.log of the virtual machine to a response message.

  André

• Migration of VMware player for ESXi strike SCSi problem

  Hello

  I'm just a newbee with VMware.

  First, I installed Centos 6.2 on VMware Player.

  Then I download the Virtual Machine on Esxi5 U1 directory using the VMware client. (not the converter)

  Then I tried to use the VHD with creating new virtual machine on ESXi.

  But I got an error with scsi controller when I turn on the machine verual. (i.e. apparently guest OS cannot handle the controller scsi.)

  I tried all types of (e.g., LS logical parallel) scsi controller in the choice, but all are omitted.

  Is there someone like a solution for this problem.

  Josephino

  Welcome

  Using vmware converter standalone will solve your problem.

  try to download https://my.vmware.com/group/vmware/evalcenter?p=converter

  GL

  Thread moved to VMware ESXi 5 to converter

• Problem installing VMware Player

  I wanted to install VMware Player for some time, but whenever I tried to install it on my computer, I found a bug in the installation script.

  Immediately after you click 'Next' on the "Installation of VMware Player" screen, I get a "script error":

  > > > > > > > > > > > > > >

  An error has occurred in the script on this page.

  Line: 871

  7 tank

  Error: Expected ')'

  Code: 0

  URL: file:///C:/Users/Blank's%20Desktop/AppData/Local/Temp/vmware_1331872418/index.htm?lang=1033 & local = 1033

  > > > > > > > > > > > > > >

  After this error message, the installation hangs at this point.

  I use it on a Windows 7 desktop machine.

  Have experience you this problem?  What are my options for installation?

  I appreciate any help you can lend.

  Do yourself a huge favor and change the MS beast by default folder %TEMP%.  Remove the user folder-specific and TMP % environment variables so just leave the system those - who are the shortest paths and don't contain strange characters, which will often screw up installers.

• Problem installing VmWare Player Vista slot "in IE script error."

  Hi all

  Forum of the I'm new in and I'm already bothered...

  I want to install VmWare Player and the big problem when I run

  installing the launch goes well I aux.1 location

  installation and the!

  A dialog box opens and says "internet explore the script error" (error vmware image)

  So I say yes or no and the window grey (grey on vmware image)

  Comment do pour installation...?

  I said that I was running VISTA ULTIMATE EDITION and I did the updates of windows...

  I'm at Court of imagination... sniiiiif!

  Thanks in advance for your help

  Kind regards

  Denis

  OK, I'm back to zero:

  -creates "c:\temp".

  -copy of VMware-player - 3.1.2 - 301548.exe in c:\temp

  -executes the command "c:\temp\VMware-player-3.1.2-301548.exe/e c:\temp\player".

  -executes the command "c:\temp\player\vmware player.msi".

  This should settle down.

• vmrun suspend problem of VMware Player

  I've been using VMware workstation for a while but recently switched to VMware player 3.0, (largely because of the irritating instllation problems for Workstation 6.5.3 under Ubuntu 9.10 x86_64).

  With my computer, I use the vmrun command close all my virtual machines.

  Despite downloading the latest version of Vmware-vix (1.8.1), vmrun suspend & lt; path to the vmx file & gt; generates this error message:

  Unable to connect to the host

  Error: Type of Service VIX_SERVICEPROVIDER_VMWARE_WORKSTATION

  My reading of the documentation seemed to suggest that vmrun must work with the player as a workstation. Please could someone help me understand what ' I'm missing here?

  Thank you very much

  Enter the code < code > < code > here you use the t on vmrun indicator to indicate that the target is a vmware player? :

  < Code >-T < hostType > (ws| ) Server| server1 | fusion| esx| vc| Player )< code >

  I was able to run suspend with:

  <code>$ vmrun -T player suspend /export/vmware/cmp/cmp.vmx
  
  
  </code>
  

  It is with the version of the player (3.0.0 build-203739) included in VMWare Workstation 7 (on Ubuntu 9.10).

  of http://serverfault.com/questions/97999/vmrun-suspend-vmware-player-problem

  StarWind software developer

  www.starwindsoftware.com

• problems installing XP using vmware player

  I used vmware for some time, but just re - install my virtual XP environment.

  My host PC is running win7pro_32bit and I use vmware player (v4.0.0 build-471780)

  When I go to start the installation (from CD using CD I used to build PCs in the past, but never in vmware), I see an error

  "CDBOOT: couldn't find NTLDR.

  I'm guessing that my winXP disk might be shot, but I can't believe (seems ok)... is it possible that I missed an obvious step?

  I have attached a log if that helps?

  Welcome to the community,

  If please define the virtual CD-ROM drive in the virtual machine for "Legacy Emulation" settings and try again.

  André