VMWare Workstation cannot specify the page 'specify the Destination?

Similar Questions

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• Workstation cannot find the VMDK file, but it exists.

  I backed up a Windows 7 year last to Carbonite. He had several defined virtual machines and I now have to watch a Windows 7 computer. I downloaded and unpacked the entire file, I think. When I try to run it with my computer it says

  Could not open the folder "D:\Windows 7 Vaio\Windows 7.vmdk":

  The system cannot find the specified file.

  But the file is actually in the folder where it is looking and he had the same name. Why can't he see the file? How can I solve this problem?

  Depending on the file format of the virtual disk, virtual disk may consist of several hard files, and the error can occur because of one or more of the required . VMDK files is not being restored. If the . a VMDK file is a small text file, it must contain the names of all the -s #. VMDK files.

  André

• VMWare Workstation stops in the middle of the night without user interaction

  Hello

  We conduct the following problem:

  We have a Windows Server 2008 hosting two Windows XP virtual machines using VMWare Workstation 7.0.1. Every few days/weeks, we find the host that is running but VMWare Workstation closed without error message either. I checked the log of the virtual machine and here is the interesting part. What can trigger such behavior?

  03:17:02.995 12 August: vmx | VMXVmdbCbVmVmxExecState: Change of State Exec asked the State suspended without reset, hard.

  03:17:02.997 12 August: vmx | CPT current = 0, asking 1

  03:17:02.997 12 August: vcpu-0 | Fact Sync monModules (1).

  03:17:02.997 12 August: vcpu-0 | CPT: monitor build mode 1

  03:17:03.737 12 August: vmx | CPT current = 1, asking 2

  03:17:03.737 12 August: vcpu-0 | CPT: generate 2 monitor mode

  03:17:03.737 12 August: vmx | CPT current = 2, asking 3

  03:17:03.765 12 August: vcpu-0 | Fact monModules (3) CPT.

  03:17:03.765 12 August: vcpu-0 | CPT: build mode monitor 3

  03:17:03.767 12 August: vmx | Progress - 1% (msg.checkpoint.saveStatus)

  03:17:03.767 12 August: vmx | Controlled in VMware Workstation 7.0.1 build 227600, Windows host

  03:17:03.785 12 August: vmx | BusMemSample: initPercent 3 75 hit 42106 checkpoint

  03:17:03.787 12 August: vmx | MM: Renamed E:\Virtual Machines\VM-DEVGW10G\564d914f-6520-6161-6d40-f23fec40dc4c.vmem.\VM-DEVGW10G.vmem

  03:17:03.787 12 August: vmx | 0% (none)

  03:17:03.787 12 August: vmx | Progress 1% (none)

  03:17:03.790 12 August: vmx | Progress of 2% (none)

  03:17:03.790 12 August: vmx | Progress of 3% (none)

  03:17:03.790 12 August: vmx | Increased by 4% (none)

  03:17:03.792 12 August: vmx | Progress of 5% (none)

  03:17:03.792 12 August: vmx | Increased by 6% (none)

  03:17:03.792 12 August: vmx | Advance of 7% (none)

  03:17:03.792 12 August: vmx | Progress of 8% (none)

  03:17:03.795 12 August: vmx | Progress of 9% (none)

  03:17:03.795 12 August: vmx | Progress of 10% (no)

  03:17:03.795 12 August: vmx | Increased by 11% (none)

  03:17:03.797 12 August: vmx | Progress of 12% (none)

  03:17:03.797 12 August: vmx | Progress of 13% (none)

  03:17:03.797 12 August: vmx | Progress of 14% (none)

  03:17:03.800 12 August: vmx | Progress of 15% (none)

  03:17:03.800 12 August: vmx | Progress of 16% (none)

  03:17:03.800 12 August: vmx | Progress of 17% (none)

  03:17:03.802 12 August: vmx | Progress of 18% (none)

  03:17:03.802 12 August: vmx | Progress of 19% (none)

  03:17:03.802 12 August: vmx | Advance of 20% (none)

  03:17:03.805 12 August: vmx | Progress of 21% (none)

  03:17:03.805 12 August: vmx | Progress of 22% (none)

  03:17:03.805 12 August: vmx | Progress of 23% (none)

  03:17:03.807 12 August: vmx | 24% (none)

  03:17:03.807 12 August: vmx | Progress of 25% (none)

  03:17:03.807 12 August: vmx | Increased by 26% (none)

  03:17:03.810 12 August: vmx | Progress of 27% (none)

  03:17:03.810 12 August: vmx | Progress of 28% (none)

  03:17:03.810 12 August: vmx | Advance of 29% (none)

  03:17:03.812 12 August: vmx | Advance of 30% (none)

  03:17:03.812 12 August: vmx | Rise by 31% (none)

  03:17:03.815 12 August: vmx | 32% (none)

  03:17:03.815 12 August: vmx | Progress of 33% (none)

  03:17:03.817 12 August: vmx | Advance of 34% (none)

  03:17:03.817 12 August: vmx | 35% (none)

  03:17:03.820 12 August: vmx | Increased by 36% (none)

  03:17:03.820 12 August: vmx | Progress of 37% (none)

  03:17:03.822 12 August: vmx | 38% (none)

  03:17:03.822 12 August: vmx | Progress of 39% (none)

  03:17:03.825 12 August: vmx | Progress of 40% (none)

  03:17:03.825 12 August: vmx | 41% (none)

  03:17:03.825 12 August: vmx | 42% (none)

  03:17:03.827 12 August: vmx | 43% (none)

  03:17:03.827 12 August: vmx | 44% (none)

  03:17:03.827 12 August: vmx | Progress of 45% (none)

  03:17:03.830 12 August: vmx | 46% (none)

  03:17:03.830 12 August: vmx | 47% (none)

  03:17:03.832 12 August: vmx | 48% (none)

  03:17:03.832 12 August: vmx | 49% (none)

  03:17:03.832 12 August: vmx | Advance of 50% (none)

  03:17:03.835 12 August: vmx | 51% (none)

  03:17:03.835 12 August: vmx | Progress of 52% (none)

  03:17:03.837 12 August: vmx | Progress of 53% (none)

  03:17:03.837 12 August: vmx | 54% (none)

  03:17:03.837 12 August: vmx | Progress of 55% (none)

  03:17:03.840 12 August: vmx | 56% (none)

  03:17:03.840 12 August: vmx | Progress of 57% (none)

  03:17:03.842 12 August: vmx | Progress of 58% (none)

  03:17:03.842 12 August: vmx | 59% (none)

  03:17:03.842 12 August: vmx | Advance of 60% (none)

  03:17:03.845 12 August: vmx | 61% (none)

  03:17:03.845 12 August: vmx | Progress of 62% (none)

  03:17:03.847 12 August: vmx | 63% (none)

  03:17:03.847 12 August: vmx | 64% (none)

  03:17:03.850 12 August: vmx | 65% (no)

  03:17:03.850 12 August: vmx | Progress of 66% (none)

  03:17:03.850 12 August: vmx | 67% (none)

  03:17:03.852 12 August: vmx | 68% (none)

  03:17:03.852 12 August: vmx | 69% (none)

  03:17:03.855 12 August: vmx | Progress of 70% (none)

  03:17:03.855 12 August: vmx | 71% (none)

  03:17:03.857 12 August: vmx | 72% (none)

  03:17:03.857 12 August: vmx | 73% (none)

  03:17:03.857 12 August: vmx | 74% (none)

  03:17:03.860 12 August: vmx | Progress of 75% (none)

  03:17:03.860 12 August: vmx | 76% (none)

  03:17:03.862 12 August: vmx | 77% (none)

  03:17:03.862 12 August: vmx | 78% (none)

  03:17:03.862 12 August: vmx | 79% (none)

  03:17:03.865 12 August: vmx | 80% (none)

  03:17:03.865 12 August: vmx | 81% (none)

  03:17:03.865 12 August: vmx | 82% (none)

  03:17:03.867 12 August: vmx | 83% (none)

  03:17:03.867 12 August: vmx | Progress of 84% (none)

  03:17:03.867 12 August: vmx | 85% (none)

  03:17:03.870 12 August: vmx | 86% (none)

  03:17:03.870 12 August: vmx | 87% (none)

  03:17:03.870 12 August: vmx | 88% (none)

  03:17:04.085 12 August: vmx | GuestRpc: Reset of channel 0 (toolbox)

  03:17:04.085 12 August: vmx | GuestMsg: Channel 0, can't unpost because the previous post is already completed

  03:17:04.085 12 August: vmx | GuestRpc: Channel 0 reset.

  03:17:04.085 12 August: vmx | GuestRpc: Reset the 3(toolbox-dnd) channels

  03:17:04.085 12 August: vmx | GuestMsg: Channel 3, cannot unpost because the previous post is already completed

  03:17:04.085 12 August: vmx | GuestRpc: Channel reset 3.

  03:17:04.132 12 August: vmx | Progress at 89% (none)

  03:17:04.152 12 August: vmx | 90% (none)

  03:17:04.172 12 August: vmx | 91% (none)

  03:17:04.190 12 August: vmx | 92% (none)

  03:17:04.212 12 August: vmx | 93% (none)

  03:17:04.235 12 August: vmx | 94% (none)

  03:17:04.257 12 August: vmx | 95% (none)

  03:17:04.280 12 August: vmx | 96% (none)

  03:17:04.300 12 August: vmx | Progress of 97% (none)

  03:17:04.317 12 August: vmx | 98% (none)

  03:17:04.335 12 August: vmx | Progress of 99% (none)

  03:17:04.365 12 August: vmx | 100% (no)

  03:17:04.452 12 August: vmx | Progress of 101% (none)

  03:17:04.490 12 August: vmx | VIX: : VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1875, success = 1

  03:17:04.490 12 August: vmx | VIX: : VMAutomation: ignoring ReportPowerOpFinished because the VMX stops.

  03:17:04.737 12 August: vmx | Stopping VCPU threads...

  03:17:06.490 12 August: mks | End MKSRole pseudocalls, the State was 1

  03:17:06.490 12 August: mks | MKSHostOps_Exit3D: 1: 0

  03:17:06.490 12 August: mks | Fate of MKS Async thread

  03:17:06.490 12 August: vmx | VIX: [2684 mainDispatch.c:915]: VMAutomation_PowerOff: power off the power.

  03:17:06.602 12 August: vmx | Application of TOOLS received in VMX to set the 'enableDnD' option - & gt; '0'

  03:17:06.602 12 August: vmx | Application of TOOLS received in VMX to set the option "copypaste" - & gt; '0'

  03:17:06.602 12 August: vmx | Application of TOOLS received in VMX to set the option "copypaste" - & gt; '0'

  I know that this is perhaps a very obvious thing to check, but sometimes, they are the most neglected

  The server reboots after updates windows for example? or is there no idea in the windows event log to moor with vmware logs?

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• 11 Linux workstation cannot start the VM because/dev/vmmon error

  When you start a virtual machine in VMware Workstation 11 for Fedora 21 I receive the following errors:

  • Unable to open/dev/vmmon: no such file or directory. Please ensure that the "vmmon" kernel module is loaded.
  • Could not initialize the surveillance apparatus.

  I use Fedora 21 Workstation, the kernel Linux K45AF 3.18.8 - 201.fc21.x86_64.

  Please let me know if anyone has any information regarding this issue.

  It is a known problem, please try the KB: http://kb.vmware.com/kb/2107267,

• Block of VMWare workstation to restart the virtual machine

  Hi all...

  I use vmware workstation 9.0.2 on a machine running windows 7 Professional (64 bit) on any domain.

  the problem is that: when I reboot whole VM (windows/linux), vmware stop working a present the home screen (with options F2, F12, ESC)... at this time, all orders (average, suspend, reset) does not work... I need to manually complete the vm procecess - ware.exe, remove *.lck items and restart the physical machine...

  If I stop the virtual machine, all work without problems...

  any ideas?

  Hi riccimaticand welcome to the VMware communities!

  Try disconnecting the virtual CD/DVD drive.  It seems that there are situations in which problems arise to restart a guest, operating system while its virtual optical drive is connected.  The most common cause is using MagicDisc/MagicISO on the host, which is known to cause exactly the problem you describe.

  See you soon,.

  --

  Darius

• Cannot install VMware tools - "cannot find the component...". »

  I created a Windows XP Pro VM under a host Windows 7 Pro using Player 4.02. When I try to install VMware tools I get the message "can't find conponent on the update server. Contact VMware support or your system administrator. "The host and guest both can work a network connectivity and the internet. I saw at least another poster on another forum mentioned this error message and told him to install by mounting the ISO and install it manually. I looked in every subdirectory of the installation of the reader and any windows.iso file could not be found. Is it supposed to be there in this version of the player? If this is not the case, how can I get the iso? Any help is appreciated.

  This question will probably be corrected in the next few days and I see this with other versions.  Right now the last repository showing is: http://softwareupdate.vmware.com/cds/vmw-desktop/player/4.0.1

• Win LR 6.4 import/Add - cannot change the destination of the catalogue

  Using LR 6.4 and has several hard drives installed on my desktop computer.  LR (.lrcat) catalogs are on the G drive - and have always been on the G drive.  LR and Photoshop are also installed on drive G.  My photos are in the folders on the F drive.  My two catalogues are given due recognition in the preferences as being on drive G.

  When I use the import - Add command, LR allows me to choose the source, but immediately chooses the destination as "My catalog" C drive.  Although there is a small box next to the C drive, it is unusable and I can't find a way to change the destination.  If I use other commands such as copy, I am able to change the destination.  But whenever I load photos from a disc, I have for them to make a folder on the F drive and copy them from the disk to the new folder.  Then, I want to add these pictures to the catalog that is currently active.  I want to add them without moving... l

  I did a search for .lrcat and all the catalogs were on drive G, as they are supposed to be.  However, there is an entry on the C drive that is marked as a MS Word file and it is called: Lightroom assessment.docx.  A paragraph seemed more likely guilty, but I don't know if I should change it and if so, what to change:

  The application folder: G:\Program Adobe Lightroom

  Library path: G:\Lightroom Backups\June2015\June2015.lrcat

  \Adobe\Lightroom

  Settings folder: C:\Users\mg\AppData\Roaming

  Thanks for any help or suggestions.  Is to make the process even very frustrating catalog help

  No matter that one of your hard drives, the catalog is on. If this catalog is one that is active, then it is one which will contain references to imported pictures. When you use the add in the import dialog box images are added to the catalogue of their current location. You cannot specify a different destination when you use this option. When you use the copy option, then you are able to specify a destination in the right column of the import dialog box. You must choose the appropriate drive and the main folder in the folder tree that appears. Then, specify the name of the subfolder in the highlighted area:

  

  You talked about change the destination of the catalog. It was a poor choice of words or you don't understand how the catalog works. The catalogue is available in one place. Normally it does not move anywhere unless you choose to do it manually. You can control the destination of your imported images, and Lightroom will import to the destination on any hard drive. But they are managed using the catalogue that remains in one place.

• VMware workstation cannot use my ram

  When I try to start a virtual computer it tells me that there is not enough available ram, I should lower my vm settings to use only 40 megabytes. WS is configured to use only physical RAM. and host has 32GB, 9% of which is currently used.

  Anyone had this problem before? should I (buy) open a support ticket? is there another way to attract the attention of vmware that does not involve buying a support ticket?

  Thank you!

  Try to upgrade to 10.0.5 Workstation.  The problem you are experiencing should be fixed by a change to the 10.0.4 Workstation: VMware Workstation 10.0.4 Release Notes

  It should not be necessary to remove the Microsoft update more.

  See you soon,.

  --

  Darius

• AppAssure BMR cannot find the Destination disk.

  I am preforming a bare metal restore material disimillar and Appassure cannot find the drive on the target computer.

  Restore dell Poweredge R430 13g. The discs are in a controlled by a H330 PERC RAID 1.

  Is there something I am missing, usually displays the disc without any problems?

  

  Thanks for the support!

  Inject you the Perc controller drivers in the boot cd when it was created? If this isn't the case, then this is probably the issue.  He can't access the storage controller so he can't see the disks.

• Cannot create the destination file during the file extraction

  I am trying to install a program from a zip compressed file, but Windows will not let me. When I try to run the files directly from the zip, it tells me that 'the destination file cannot be created." Alternatively, when I try to extract the individual files in the zipped folder, I get "error code 0x80004005".

  I am running Windows 7 64 bit and I've never had this problem before. Any help would be appreciated!

  You can try to register the .dll file and see if that makes a difference.

  From an elevated command prompt try regsvr32 zipfldr.dll

  You can also create another user to see if they have the same problem.

• Windows Installer cannot find the Destination component

  After wash starts the Windows Installer window if poster once finished top of desktop. The process takes about a minute. Windows Installer message is, "Preparation for installation." Then, the Destination component appears with message "Please wait while Windows configures the destination component", and shows the progress bar. Then, the Destination component window appears with the message, "an installation package to the Destination of the product component is not found. Try the installation again using a valid copy of the installation package, "Destination. msi´."

  This package is not in my computer. This happens everytime I turn on the computer. The whole process is very long. How can I fix it so that the message?

  Thank you for your help.

  Hi lmcrae,

  Put your computer in a clean boot configuration to determine which product is responsible for this. Clean boot is a way convenient, safer to change the options for startup in the registry; You can turn individual items or disable freely to try various combinations up to that narrow you the problem. Once you find out, post details about the same so that we can take additional measures.

  Please see this article for detailed information on how to do it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• VMware Workstation running without the GUI

  I used to use VMware Server and configured to start some VM, I need on-site at startup. I went to the workstation to work with our ESX VM, so now I wonder if there is an easy way to get a similar behavior.

  There is no a lot of information about this in the manual, I tried running ' / usr/bin/vmware - blah.vmx x ' when when I connect, but the graphical interface starts too. If I can remove the GUI and I have just the tray icon, I'd be a happy man.

  Once my session X crashed and the VM kept working well, so I guess that there is a process that is actually running the virtual machine independent of the GUI somewhere can I drill to get the virtual machine started?

  N ° workstation is designed for interactive virtual machines.  6.x and newer, the ability was added to maintain a virtual machine running in the background AFTER it was launched upward - however the GUI should be started to start/run prompt, AND user must stay connected (i.e. the virtual computer is running as a user process).  If you want to run virtual machines under services, using VMware Server.

• VMWarer Image cannot start the Virtual Machine in Windows 7

  Hello

  Receive a machine with disc encryption HARD full of checkpoint on it. I had successfully converted to a virtual machine Image, unfortunately every time tried to start gives me BSOD.

  Tried to fix it, tried to return to the image, but the same results.

  There were no errors during the conversion. complete cleaning.

  Someone at - it suggestions?

  How did you convert the image in a virtual machine?
  have you changed the type of Adapter LSI - SAS during conversion?

• Cannot reach the destination of an IPSec tunnel through another IPSec tunnel

  Hi all

  I have a PIX 515E version 8.0 (2).

  I have two remote sites connected to this PIX via IPSec tunnels.

  Each remote site can reach local networks behind the PIX, but I can't reach remoteSiteB remoteSiteA.

  Thus,.

  SiteA <----- ipsec="" -----="">PIX1 SiteX <---------------->10.0.8.1 10.30.8.254

  SiteB <----- ipsec="" -----="">PIX1 SiteX <---------------->10.0.8.1 10.138.34.21

  SiteA can ping SiteX

  SiteB can ping SiteX

  SiteA cannot ping SiteB

  SiteB cannot ping SiteA

  If I do not show crypto isakmp ipsec his I see appropriate subnets:

  Tag crypto map: CRYPTO-MAP, seq num: 4, local addr: 203.166.1.1

  permit access-list ACLVPN-TO_SITEA ip 10.138.34.16 255.255.255.240 host 10.30.8.254

  local ident (addr, mask, prot, port): (10.138.34.16/255.255.255.240/0/0)

  Remote ident (addr, mask, prot, port): (10.30.8.254/255.255.255.255/0/0)

  current_peer: 104.86.2.4

  Tag crypto map: CRYPTO-MAP, seq num: 5, local addr: 203.166.1.1

  access-list ACLVPN-TO_SITEB allowed host ip 10.30.8.254 10.138.34.16 255.255.255.240

  local ident (addr, mask, prot, port): (10.30.8.254/255.255.255.255/0/0)

  Remote ident (addr, mask, prot, port): (10.138.34.16/255.255.255.240/0/0)

  current_peer: 216.178.200.200

  Journal messages that seem to point to the problem...

  April 18, 2013 13:27:35: % PIX-4-402116: IPSEC: received a package of ESP (SPI = 0xD51BB13A, sequence number = 0x21A) 104.86.2.4 (user = 104.86.2.4) at 203.166.1.1.  Inside the package décapsulés does not match policy negotiated in the SA.  The package indicates its destination as 10.138.34.21, its source as 10.30.8.254 and its Protocol 6.  SA specifies its local proxy like 10.0.8.0/255.255.255.0/0/0 and his remote_proxy as 10.30.8.254/255.255.255.255/0/0

  My question is really what I have to do something funky to allow traffic to pass between the two tunnels?

  Hello

  This could be much easier if we have seen the real configurations.

  But here are some things to be confirmed in the configurations (some of them you mentioned above, but I still quote once again)

  • Make sure that each firewall, you set the appropriate VPN L2L ACL
  • Make sure that you have configured NAT0 on the central PIX "outside" interface for the Site A and Site B
  • Make sure the Central PIX has "same-security-traffic permit intra-interface" configured. This will allow the Site traffic to enter the Central PIX 'outside' interface and head back on the same interface to Site B. And vice versa.

  To view some actual configurations that may be required provided everything else is ok. (I assume that all devices are Cisco)

  Central PIX

  permit same-security-traffic intra-interface

  A connection to the site

  SITE-A-CRYPTOMAP of the 10.0.8.0 ip access list allow 255.255.255.0 host 10.30.8.254

  SITE-A-CRYPTOMAP of the 10.138.34.16 ip access list allow 255.255.255.240 host 10.30.8.254

  Site B connection

  SITE-B-CRYPTOMAP of the 10.0.8.0 ip access list allow 255.255.255.0 10.138.34.16 255.255.255.240

  SITE-B-CRYPTOMAP to the list of allowed access host ip 10.30.8.254 10.138.34.16 255.255.255.240

  NAT0

  access list for the INTERIOR-NAT0 allowed ip 10.0.8.0 255.255.255.0 host 10.30.8.254

  access list for the INTERIOR-NAT0 allowed ip 10.0.8.0 255.255.255.0 10.138.34.16 255.255.255.240

  NAT (inside) 0-list of access to the INTERIOR-NAT0

  OUTSIDE-NAT0 allowed host ip 10.30.8.254 access list 10.138.34.16 255.255.255.240

  OUTSIDE-NAT0 allowed ip 10.138.34.16 access list 255.255.255.240 host 10.30.8.254

  NAT (outside) 0-list of access OUTSIDE-NAT0

  Site has

  CENTRAL-SITE-CRYPTOMAP to the list of allowed access host ip 10.30.8.254 10.0.8.0 255.255.255.0

  CENTRAL-SITE-CRYPTOMAP to the list of allowed access host ip 10.30.8.254 10.138.34.16 255.255.255.240

  the INTERIOR-NAT0 allowed host ip 10.30.8.254 access list 10.0.8.0 255.255.255.0

  the INTERIOR-NAT0 allowed host ip 10.30.8.254 access list 10.138.34.16 255.255.255.240

  NAT (inside) 0-list of access to the INTERIOR-NAT0

  Site B

  CENTRAL-SITE-CRYPTOMAP of the 10.138.34.16 ip access list allow 255.255.255.240 10.0.8.0 255.255.255.0

  CENTRAL-SITE-CRYPTOMAP of the 10.138.34.16 ip access list allow 255.255.255.240 host 10.30.8.254

  the INTERIOR-NAT0 allowed host ip 10.138.34.16 access list 255.255.255.240 10.0.8.0 255.255.255.0

  the INTERIOR-NAT0 allowed host ip 10.138.34.16 access list 255.255.255.240 host 10.30.8.254

  NAT (inside) 0-list of access to the INTERIOR-NAT0

  Hope this helps

  -Jouni