Vorbis on sansa

Similar Questions

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Stuttering playback of mono ogg-vorbis files

  Hi all

  I recently bought a Sansa Clip 4 GB and updated to the latest firmware (v02.01.32a). I am happy to use obb-vorbis files, but have met stuttering playback when you listen to mono ogg-vorbis files. In particular I listen to an audiobook on librivox.org page:

  http://LibriVox.org/Walden-by-Henry-David-Thoreau/

  The first ogg file works, but all others stutter. After a bit of inspection using ogginfo, I discovered that the first file is stereo, while the remaining files are mono. I tried to re - encode using oggenc as Audacity using the nominal flow of 80 Kbps. All mono files I did expose the problem of stuttering.

  I then did a stereo version of the file by duplicating the mono track in Audacity. The stereo file I did read correctly. Creating a file mono downmixing the stereo file new work with oggenc produces a file that stutters during playback.

  All files read correctly in Windows Media Player with the official DirectShow filters installed.

  Anyone else having this problem or know of a work around? I really want to use ogg format!

  Thank you

  Tyler

  I decided to reformat and reinstall the latest firmware (using the MSC approach instead of the update of the firmware on Windows). All the ogg files play correctly now.

  Thanks for the encouragement!

• Need help on the first (Sansa) MP3

  I just bought a new 8 GB Sansa Fuze today at Radio Shack ($69).  I downloaded the Media Player 11 MS, but have not yet charged the "rocket". I put in the CD teeny but it seemed that it was just to download music, I didn't want to.  Could someone tell me where to go to get instructions on how to take my collection of CDs (about 70) and get them on my rocket?  Sorry for this stupid question but this is all new to me .  Thanks much for any help.

  TopdogJudy

  The only thing that I think that the most important with a collection of music is to convert it into a LOSSLESS audio format with built-in tags info that is accurate and useful for YOU.  Some call it this check-in.  (Don't think the info tag automatically downloaded from the internet will be specific!)

  This is done, it is trivial. quick work of transcode to any audio format as you want on your player; your labels will be preserved!  You can re - encode with newer codecs, to a score of different quality or in a format which is good for another player.  For example, currently, Ogg Vorbis is better compared to the size on the Fuze and Cowon players and Nero lc - AAC is the best on Sony and Apple.

  I do not use Windows Media Player.

  I use programs include:

  Exact Audio Copy (RIP and convert to FLAC)

  Mp3Tag (to edit the tags at the top)

  foobar2000 (to transcode to Ogg Vorbis)

  Winamp is popular with many and deemed easy to use.

  Those are freeware, but a beginner can find dbPoweramp particularly simple.

• My Sansa MP3 player does not connect to the Windows Media Player.

  I connected several times using the same wires.  This time THAT WMP says "connect a device" in the upper right corner.  This is probably an easy fix.  Any suggestions?  Thank you.

  Hi Larry O would be,.

  You are able to open content in Sansa?

  Method 1:

  Run Windows Media Player troubleshooting utility library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Open Windows Media Player, press the Alt key, check if the device is listed under Tools > options > devices. "Refresh list".

  If not listed parameters run 'Windows Media Player' convenience store and check the status.

  Open the troubleshooter in the Windows Media Player settings.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Hope the above information is helpful.

• How to move files to support 8 GB SanDisk Sansa Fuze player to the computer?

  How can I move audio files of SanDisk Sansa Fuze 8 GB Media Player from my computer using Windows Media Player 10?  I did it in the past with the previous versioins of Media player, but this version does not offer this option.

  Have you checked the web site of Sandisk?  http://KB.SanDisk.com/app/answers/detail/A_ID/389

• Transfer from Windows Media Player to Zip Sansa Clip

  In the end, I am creating playlists on my Sansa Clip Zip. So I think THAT I have to create a playlist in Windows Media Player and then sync my Sansa Clip Zip. For some reason any I am only able to see 5 playlists, but I know that I have created several of them. In fact, if I try to create a new play list using a name I know, I created, it is said that there are already. How can I see ALL my playlists?

  Also, if I click on playlists for the Sansa Clip Zip it shows I have 9 playlists, but I can't see what they contain!

  Hi Nymickey,

  I suggest you to contact the Sansa Clip Zip support for better support associated with Sansa Clip Zip and check if it helps.

  http://KB.SanDisk.com/app/ask/session/L2F2LzEvdGltZS8xMzM4MDA4NzQ5L3NpZC90QmxJQjJaaw%3D%3D

• I've used iTunes until my iPod crashed. Now, I have a Sansa and I would add my music on my Media Player.

  I've used iTunes until my iPod crashed. Now, I have a Sansa and I would add my music from my Media Player so I can set up my Sansa with my music, but it does not drag-and - drop music into my music folder.  Help, please

  original title: Media Player

  Hi CarmenRedd,

  Follow the steps in the article.

  Synchronize your media files to a portable device

  You can also contact Sansa support for more help and information.

  http://KB.SanDisk.com/

• SanDisk Sansa Clip silver 4 GB Media Player

  I lost the voice function on my computer and I need to install that

  Hello

  1. what exactly is the problem?

  2. you do not receive sound sansa or your computer?

  If you get no sound from the player, then I suggest you to update the drivers from this link and check if that helps:

  http://www.SanDisk.com/SanDisk-support/driver-download-wizard

  It will be useful.

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• No sound on computer, using SanDisk Sansa Fuze 8 GB Media Player Silver

  MyComputer has no sounds

  original post: SanDisk Sansa Fuze 8 GB Media Player Silver

  Hello

  • You receive an error message?
  • What were the changes made before the show?
  • What player you use to play?

  You can check this link:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

• my computer does not recognize my sansa c250 when I plug it in is there something I need to download it first?

  I have to download something first to get my computer to recognize my sansa c250? It automatically recognizes my e140. don't know what to do next.

  Hello Dgrnn2,

  Thank you for your message.  Your Sansa c250 may require an update of the firmware.  Click HERE for more information.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Why my WMP will not recognize my Sansa E260 player?

  I connect it via USB and the media player will not recognize.
  Two years ago, that he did it. I got a lot of work on my PC since then. Anyone familiar with the Sandisk players?

  Hi thomwilliams,
   
  -What version of Media Player do you use?
   
  Try the steps listed in the article below and check if it helps fix the problem:
   
  Sansa player not recognized by the computer
   
  There is an update firmware released for the Sansa Player. Download and apply the same and see if the problem is resolved.
  Sansa player not recognized do not update to firmware Sansa

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• Sansa Clip + 8 GB not recognized on my PC

  I have windows 7 Home premium, SP1

  Used to have no problem to access the MP3 player.

  Now, I can only see the files in windows Explorer.  Whenever I try to copy the Clip, I get an error message:

  A device attached to the system is not functioning

  ~ or ~.

  The unit has stopped responding or has been disconnected.  This device supports audio files, it does not support. MP3 files...

  The second message is ridiculous since the Clip is loaded with MP3s.  Generic message...

  I tried to swith USB modes auto detect MTP and MSC, no luck.  I've removed the device and had windows to reinstall the drivers.  I downloaded the update from sansa and it says that it updated the firmware to V01.02.18A.

  I have run out of ideas to try and unfortunately, patience.  Any suggestions?

  Crazy... tried another USB port and no problems (USB mode was DPW).

  Whatever it is, I was able to load more songs, so I'm good.  Do not forget to use the slot #2