View double screen with XP virtual

Similar Questions

• Problem with 5.2 and computer ThinClient view double screen

  Hello

  When I try to use the double screen with Windows 7, PCoIP Protocol and a computer ThinClient Fiju FUTRO S900 (3.8.0) it doesn't.

  The office is just mirrored between the two screen but it is impossible to extend the desktop. I can't change the display settings in Windows and as much as I know there is no GPO that prevent to do.

  When I connect to this virtual machine with View Windows Client it works.

  Any help?

  Thanks in advance.

  OI!

  I found the solution.

  Setting the screen must be configurerd on the display of the computer ThinClient S900 preference.

• W540 - display resolution double screen with cable DVI - D Dual Link

  I recently bought a W540 and connected to my Dell u3011 30 "monitor. I used the Dual Link cable DVI - D that came with the monitor and connected on my Dock Ultra. The maximum resolution I can get is 1920 x 1080? When I pass a display port cable I can achieve complete resolution of 2560 x 1600? Is there something I need to do to get the complete resolution of 2560 x 1600 with dual link DVI - D cable? I want to be able to connect 2 laptops to a normal screen and 1 entrance to port the screen so I need to be able to use the DVI cable on the 2nd machine while allowing resolution 2560 x 1600.

  Port DVI - D on the Ultradock is single link only.

  If you need DVI - D with double bond (i.e. 2560 x 1600) resolution, you need an active displayport to dual binding converter. StarTech makes, they should be about 80 USD or something in this region.

• Double screen with two VGA monitors (model Inspiron 620)

  Hello

  I have an Inspiron (processor i5-2320 @3 GHz) 620 office. The graphics card is AMD Radeon HD 6450.

  With two displays analog VGA, I wanted to dual monitor.

  My problem is that the Office does not recognize the two vga monitors but that one monitor. Vga ports (I have two) on the desktop do not work at the same time.

  So, I tried to use the DVI port, but it is only allowed to use DVI - D (I thought I'd use two monitors if allowed the graphics card DVI connector VGA). DVI - D deosn seem to allow analog monitors.

  Currently, I only use one of the two with an analog monitor vga ports.

  I wonder if I should buy the new digital monitor that can be connected to the DVI - D port.

  Or is there a method to use both on the desktop vga ports?

  riofunk7,

  You have two options...

  (1) connect both monitors to the ports added discrete video card
  (2) connect a monitor to the integrated VGA port. Connect the other monitor to the additional port of discrete video card
  * Reboot the system
  * Press F2
  * Navigate to Advanced-Graphics Configuration
  * Activate Intel several monitor function
  * Press F10 to save your changes and exit the bios

• Cannot select a native resolution when double screening

  Hello
  Here are the basics. Laptop is a HP Pavilion DV2480se running Vista Home premium 64-bit w / SP2. I have a Samsung Syncmaster 2243 NW LCD screen attached via a VGA cable.

  Since I got the screen (4 months) I was able to double screen with the laptop screen running at its default value of 1280 by 800 pixels and LCD 1680 x 1050 screen (it is wanted to display resolution) by adjusting the parameters via the display settings and/or the NVIDIA Control Panel. I do always disconnect the LCD screen of the portable computer and reconnect without problem. Today, if I plugged it upward and the screen LCD looked funny and when I went to set the resolution in the display settings I can not select 1680 x 1050, nor in the NVIDIA Control Panel. I tried to unplug and reconnect the cable, restart, reinstall the driver, allowing the extra modes on the monitor etc and nothing allows me to get the mode 1680 x 1050.

  I tried to connect to another screen but have the same problem with it.

  Can someone provide advice.

  Hello

  Check with support from Nividia and their forums might be a known issue.

  NVIDIA - drivers - DO NOT USE THE SCANNER she finds often versions older - information entered in manually
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA - Support
  http://www.nvidia.com/page/support.html

  NVIDIA communities (forums)
  http://www.nvidia.com/object/nvidia_zones.html

  You may have to go back to an older driver. Strange that you found has been manually
  older than you. Wonder if the Windows updates or something else installed one
  incorrect driver. Rob - bicycle - Mark Twain said it is good.

• Workin in Live View mode when I press the zoom button to focus, I get a white screen with an x 5 or a wr 10 x

  Working in Live View when I press the zoom button to focus, I get a white screen with an x 5 or x 10 written.  I do not get the image of zoom.  He just started this today and I used it for years.  Any help?  Thank you.  OH, I have a 450 d (rebel xsi)

  Thank you very much

• Double option missing in several drop-down screens with Windows 7 connected to Panasonic Plasma Panel

  Working with multiple monitors with Windows 7 - connected Panasonic Plasma Panel to the laptop. He showed parallel double screen on the two instantly. I tried to set the resolution and then display duplicate in multiple monitors drop down option is no longer available? What is the benchmark for this - I want to use two monitors with the same screen for the discussions.

  Hello

  You can try to configure the display on a very low resolution just to test if the option back. If it comes the problem is related to the video card is not able to support a higher resolution. So, I suggest you contact the manufacturer to obtain the best resolution taken in charge check and graphics card if it helps.

• Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get normal

  Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get the normal icon of pre, File, Edit, Clip, etc..

  I intend to have bought the first 13 items, it would be better if I bought a new program instead of downloading an upgrade, just in case the upgrade does not correctly load because of the error with my current program?

  If I have the deleted first Elements 9 on my PC would I lose all my existing videos that have been produced using Prime Elements 9 or would they be registered so that they can still be worked in first 13 items?

  First elements 13 works with Windows 7?

  Thank you

  Terry

  First 13 elements absolutely works with Windows 7!

  In fact, I highly recommend you download the free trial version and give it a test run.

  In the meantime, go to Windows Update and make sure you have all the updates of Windows, including those who do not automatically install it. Then go to the website of ATI / nVidia and ensure that you have the latest driver for your graphics card and go to Apple.com and ensure you have the latest version of Quicktime, by the requirements of the program.

• View on Equium M40X - no big screen with XP

  When that I start, the screen is "full screen" until the load of XP and then it will appear as if it were a normal screen (with a black stripe down each side) and not widescreen.
  I started in safe mode, and the screen stays full wide screen.
  I then rebooted on the Toshiba site display drivers and it makes no difference.

  Any ideas please?

  Hello

  As far as I know, this unit came with 4 different graphics cards. In this case, you must be sure that you have installed a graphics driver on the right.
  Also I recommend you change the display resolution. Try using different settings.
  Please post again if there are changes.

  PS: as far as I know in the BIOS you'll find an option called stretch LCD display. Check this option.

  Good bye

• When I click on the Firefox Start Page it goes to a full screen with the logo of Firefox... full page... nothing else showing... Help, please.

  Something went wrong when I was trying to figure out how to get my regular size rather than the full screen display. Cannot get any tools, options, etc. Only the logo of Firefox with the search bar... That's happened.?

  Normally the F11 key will pass you to the normal display mode (or in the display full-screen function of the current screen). Does it work?

  Mode full screen, drag your mouse point to the top must cause the toolbar area to slide down. Does it work?

  If Firefox is 'stuck' in the view full screen, the file that contains the dimensions of the window may become corrupted. You can rename the file to fix this problem, but it may also affect what bars are displayed (for example, if you are using the classic menu bar, you may need to which restart). Here's how:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  To open the page without having access to all the foregoing, either:

  • Hold down the ALT key and press H to activate the Help menu, release the ALT key and press T to display the troubleshooting information page
  • type or paste the following text in the search box of the start menu, and press ENTER:
    firefox.exe "about:support"

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  To exit Firefox do not have access to the foregoing:

  • Hold down the ALT key and press F to activate the menu file, release the ALT key and press x to trigger an exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• What is the problem with the virtual store for Journ.E

  What is with the virtual store?
  I have a screen wihte, I never see virtual store?
  I think the support is very very bad.

  No one becomes an answer on the question!

  I put t know why Toshiba need so much time to solve this problem.
  Unfortunately, we have to wait until it will be fixed. :(

• Calendar resumes always full screen with black bars at the top and bottom

  Calendar always starts like that. I can reduce and enlarge the window, and the problem disappears when the application is open. But once I leave the app and re - open, I have the black bars and minimize/maximize again to get the calendar view full-screen. Seems to happen on the screen of my Air and when you are connected to an external monitor.

  Thanks in advance

  

  Hello

  I have the same problem.  I had this bug with 10.11.x for awhile and then he suddenly stopped.

  I don't really know how...  Maybe it was a cleaning with Onyx, but I'm not sure.

  Since the upgrade of 10.11.4 today the bug came back.  I ran Onyx on the system without a bit of luck so far.

  @xryancx: do you have that you have installed a beta version of Mac OS X?  It was my case (El Capitan GM) but I did upgrade to the official, as soon has - it is available on the Mac App Store.

  Some people think that I've noticed is that the bug does not affect view DAILY.

  Step to reproduce:

  1. Calendar launch (you'll get the bug full screen)
  2. Exit full screen
  3. Click on daily view
  4. Return to full screen mode
  5. Calendar of quit smoking
  6. Calendar lunch again (there is no bug with day mode)

• Double screen Enquiry

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  philiom wrote:
  

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  The only upgrade to the video that you can install is a PCI Express x 1 video card with two video.  The card must be a low-profile PCI Express x 1 video card (with 512 MB or less VRAM) that there is no PCI Express x 16 slots on the motherboard. For a card with VRAM than an upgrade of the power supply must be considered as your original power supply is only 180W. Who does not have capacity to a level that will attract a lot of current.

  Best regards
  ERICO

• white screen with lines

  I came here because I believe that it is a combination of several mistakes, I don't know.

  When I start the computer in Standard Win2k3, it gives me a white screen with Vibrio black vertical lines across on the screen, with a few horizontal. After some tests, I want to pretend it works, you press Ctrl + Alt + Delete and connected and surprisingly, the computer works - I can see the icon and the load of desk top of the page to the top, BUT the white screen is still there, the bars into brackets upward the desktop icons and the resolution is so low that I only see a small part. Moreover that apparently all workstations had been 'forced' layer on layer on the screen, as I see multiple cursors on the screen all at the same time movement and rhythm (when I move the mouse).

  The next thing that I checked, is since I have installed WinXP, but as if by magic will not work some of my programs (this is why I use it), and the screen has worked very well and very well (with almost nothing, runnable).

  Well, can not compare the two BONES, I also started Win2k3 in safe mode, safe mode with blah, all three cases of Safe Mode gives me good screen and access my programs no internet as safte mode blocks.

  I want my internet back AND my good old Win2k3. If anyone can help. It should not be a video card problem because (1) I have integrated a video card AND (2) it works well under XP

  It could be a corrupted RAM, even if dxdiag shows all the available RAM, I have hope that there is a way to check WITHOUT removing them from the socket.

  It might even be a mistake of an operating system, that I don't know how to make sure that, if I can reinstall after the top in Mode safe

  It could be another thing and combinations of these. (Probably the 2 above, in my view, have no idea how can ensure me that)

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows server on TechNet. Please ask your question in the TechNet Windows Server Forums. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

• HP laptop: black screen with cursor

  When I turn on my computer and type my password, it goes to a black screen with a cursor.  I tried different things but nothing works.  I just did a restore of the system 2 days ago cause the fan was not working. It worked yesterday.

  Hello

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K