WG102 fails with iPad / iPhone with iOS 6 and WPA2 / AES - urgent correction necessary!
Hello *.
*
After upgrading my iPad to iOS 3 6 he constantly fails to connect to WiFi with WPA2 and AES - hidden or broadcast SSID - at home and at work because the device does not accept the WPA2 password. This is also the case for my iPhone 4s, but the two appliances worked with WiFi (WPA2 / AES) perfectly with previously installed iOS 5.1.1.
*
I tried to downgrade to iOS 5.1.1 but it seems to be is no longer possible to downgrade the two iPad 3 and iPhone 4S as certification and maybe the viewport for iOS 5.1.1 was closed by Apple.
Strange behaviour seems to address a problem of firmware of the installed Netgear WG 102 APs that all do not allow the connection of iOS 6 devices with WPA2 / AES enabled :-(
Does anyone know about a possible solution to connect to WiFi with WPA2 and AES with 3 iPad / iPhone 4 and iOS 6 update for Netgear WG 102 APs?
*
Thanks a lot for any help and advice.
*
Best regards from the Germany
*
Matthias
The downgrade to 5.0.1 works. He fixed a connectivity with my two devices IOS 6, my wife 5 iPhone and my new retinal screen of the iPad. It does not appear to have caused problems of connectivity with other devices down to 5.0.1
Tags: Netgear
Similar Questions
-
When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please
Hello
If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):
-
iMessage with iOS 10 and MacOS Sierra
Before upgrading to iOS 10 and macOS Sierra, iMessages sent from my iPhone seems also in the application iMessages on my MacBook Pro and my iPad 2 Air - and the same for all three devices.
It worked very well in my opinion. When I'm at my laptop, it is very convenient type of responses on the keyboard.
However, after the upgrades, this connection has stopped. Each unit is not to see the iMessages of others, although all three devices are signed on the same iCloud account.
What is a reduction in function? Or am I missing something? I tried settings and preferences.
macOS 10.12 (mid-2014 rMBP)
10.0.2 iOS (iPhone 6s, iPad Air2)
Thank you
-bruce
Hello
Sign of iMessages (the Apple ID used) on all devices
Drag the item in Messages app from green to white (close the application) on the iPhone.
Quit the application on other devices.
On the iPhone, open the application again.
Wait for the number to check.
While what happens opened the app on the Mac and the sign of return on account of iMessage.
Once the iPhone number checked send an iMessages specifically to your Apple ID (enter it manually).
If it works, add the Apple ID in Send and Receive on the iPhone version.
Accept the UPS op on the Mac.
(repeat for other signature devices in)
Set the item "send as SMS.
Check the iPhone joins the same LAN in the Mac WiFi settings is on
Reset the transmission of text on the iPhone which will cause the Code number must appear on the Mac to put on the iPhone.
Repeat for other devices.
Basically, try a reset.
21:28 Sunday. September 25, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.
After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:
STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.OK, how much RAM have you?
I found this information:
However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.
Source:
I know - you try to install the Win7 SP1 32 bit only, but you can try it.
LC
-
InitialLdapContext fails with Java 6 and 7
I work with GSSAPI successfully with JAVA 5. With JAVA 6 and 7 of the InitialLdapContext call fails with the following stacktrace:
> > > KRBError:
sTime is Fri 14 Jun 13:40:01 CEST 2013 1371210001000
suSec is 948732
error code is 7
Error message is that server not found in the Kerberos database
Realm is DE.XXX.NET
sName is ldap/yyy.de.xxx.net
msgType is 30
KrbException: Server not found in the Kerberos database (7)
to sun.security.krb5.KrbTgsRep. < init >(Unknown Source)
at sun.security.krb5.KrbTgsReq.getReply (unknown Source)
at sun.security.krb5.KrbTgsReq.sendAndGetCreds (unknown Source)
at sun.security.krb5.internal.CredentialsUtil.serviceCreds (unknown Source)
at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds (unknown Source)
at sun.security.krb5.Credentials.acquireServiceCreds (unknown Source)
at sun.security.jgss.krb5.Krb5Context.initSecContext (unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext (unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext (unknown Source)
at com.sun.security.sasl.gsskerb.GssKrb5Client.evaluateChallenge (unknown Source)
at com.sun.jndi.ldap.sasl.LdapSasl.saslBind (unknown Source)
at com.sun.jndi.ldap.LdapClient.authenticate (unknown Source)
at com.sun.jndi.ldap.LdapCtx.connect (unknown Source)
to com.sun.jndi.ldap.LdapCtx. < init >(Unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL (unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs (unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance (unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext (unknown Source)
at javax.naming.spi.NamingManager.getInitialContext (unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx (unknown Source)
at javax.naming.InitialContext.init (unknown Source)
to javax.naming.ldap.InitialLdapContext. < init >(Unknown Source)
in kerberos. UserRoles2.getUserRoles (UserRoles2.java:27)
in kerberos. Server$ 2.Run(Server.Java:240)
in kerberos. Server$ 2.Run(Server.Java:1)
at java.security.AccessController.doPrivileged (Native Method)
at javax.security.auth.Subject.doAs (unknown Source)
in kerberos. Server.getRoles (Server.java:233)
in kerberos. Server.main (Server.Java:95)
Caused by: KrbException: identifier does not match value expected (906)
at sun.security.krb5.internal.KDCRep.init (unknown Source)
at sun.security.krb5.internal.TGSRep.init (unknown Source)
to sun.security.krb5.internal.TGSRep. < init >(Unknown Source)
... more than 29Problem research directory: javax.naming.AuthenticationException: GSSAPI [root exception is javax.security.sasl.SaslException: Insider GSS failed [caused by GSSException: no information provided valid identification (level mechanism: server not found in the Kerberos database (7))]]
Does anyone has an idea what is going wrong at Java 6 or 7?
The ktab file is created with the tool of a JRE version 7 ktab.
"c:\Program Files\Java\jre7\bin\ktab.exe" - a [email protected] password my.keytab - n 0 k
"c:\Program Files\Java\jre7\bin\ktab.exe" - a Service/[email protected] password my.keytab - n 0 k
Active directory in Windows server 2008
Don't forget: if I use Java 5, the call to InitialLdapContext works as expected.
Thanks in advance
Michael
The problem is resolved.
I used an alias in dns for the ldap_url property name. In Java 1.5, the dns alias name has been resolved to the real dns name. It can't even solve it in Java 1.6 and 1.7.
A real dns name change solved the problem.
-
Update iPhone 4 iOS 7 and restored from iTunes, but still called to restore/establish new
With the help of iTunes on OS X, I first saved my iPhone 4 and then selected Update.
When it was full, the phone rebooted, then once I had entered my language and region, he gave me 3 options to Set Up iPhone:
- -Set Up as new iPhone
- -Restore icloud backup
- -Restore from iTunes backup
So I proceeded to restore from iTunes, by using a backup from before the upgrade.
My problem: applying the restoration has not gotten me a more far - the phone brings back me to the page select a language, then back to the above 3 options. I tried once again sync in iTunes, but also backup to restore, nothing helps. WiFi is on, and I can see my mobile operator name in the upper left corner, so the phone is certainly up and running, but I can not go beyond the stage of installation.
Which will be * restore iPhone *? It takes back me to iOS 4? With my phone already restored and now successfully upgraded from iTunes, how can I'm past the stage of configuration?
You cannot restore an iPhone with iOS 7 aboard a backup performed on iOS 6 or an earlier version. Most likely, it is the cause of the problem.
-
Synchronizing messages with iOS 10 and Mac OS
I recently got an iPhone 7, and I'm looking to synchronize messages with my MacBook Air. Unfortunately, I had problems with this. According to the countless community boards is a key step in the synchronization of messages between mac and iPhone select "Text Message Forwarding" of the iPhone under settings > messages. But it seems as if this option is not (at least not in the same place) on iOS 10.
So, I wonder if anyone has a protocol to update on how to synchronize e-mail between a mac and an iPhone iOS 10 applications. Before you answer, yes I'm on wifi even on both devices, and I'm connected to the same Apple ID on both.
This - see iMessages synchronization on all devices
-
Former title: upgrade to Windows 7.
I installed the Windows 7 upgrade. I was running Windows Vista Home Premium 32 bit. The upgrade installed without problem, but I have problems with updates. It shows now that the downloads are 97%, but when I double click the icon to update in the center of the Action, it does not open. My installation history that two updates failed. They are:
Update security for Windows 7 (KB972270)
Update for Windows 7 (KB976662)
Error details: Code 800706BE
My computer is a Dell Inspiron 1525. Any help would be greatly appreciated.
Error details: Code 800F0902
Hello
Method 1.
Windows provides a built-in utility that can automatically find and fix some problems with Windows Update.Here are the steps to run this utility for troubleshooting.
a. open the Windows Update Troubleshooter by clicking the Start button, then Control Panel.
(b) in the search box, type troubleshooting and then click Troubleshooting.
c. under system and security, click Fix problems with Windows Update.
Method 2.Try also download and install these updates manually and check.
Here are links to these updates.Update security for Windows 7 (KB972270)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=75491ad0-40A6-4EFB-9574-d82210f6d0da&displaylang=en#requirements
An update is available for the native JSON feature in Internet Explorer 8
http://support.Microsoft.com/kb/976662Method 3.
We can try to reset the Windows Update components and check if that helps resolve the issue.
This article helps you reset the Windows Update components. So that we can reset the Windows Update components for you, go to the "Fix it for me" section.To reset the Windows Update settings yourself, go to the section "Let me fix it myself".
Please see this article for steps and additional information.
http://support.Microsoft.com/kb/971058Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
For more information and troubleshooting methods more check the items below.
Center solutions Microsoft Update
http://support.Microsoft.com/ph/6527#TAB0
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I can't install KB976325 update.
The system is Vista Ultimate (64-bit) Service Pack 2.
Error returned is
"WindowsUpdate_8007371C" "WindowsUpdate_dt000"
I did the following:
* Reset Windows Update via KB 971058
* Check the files with the file system Checker: no problem found
* Downloaded KB 976325 as a stand-alone file, the update failed (no error given)
* Ran Windows Live OneCare Safety Scanner: no problems found.
* Ran Windows Defender quick scan: no ound problems
* Clean the registry and temporary files with Windows DefenderThere must be a solution to this problem!
In desperation, I tried the Windows 7 upgrade. The upgrade failed at the last step. Vista was reinstalled and it works OK. However, I can't yet do the KB 976325 update! Oh, the Windows Defender definitions file has been updated through Windows Update fine.
Walter,
FYI-you are in the right forum. All Windows Update components are in the same enclosure. It is important to publish the specifications of your system, as you did.OK, lets start with a few basics. This KB976325 update is an update of security for Internet Explorer 7.
-First question is therefore always you use IE7 or have you moved to IE8?
-If you are looking for your update history is this show as installed KB? It is possible that it is already installed and that it is presented again for some reason any.Take a look at this article. It does not appear that you have tried these steps yet. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
DHCP fails with two subnets and RV325 and SG300 - 28 p
DHCP fails to issue addresses in double subnet environment. Please see attached.
Hello
Mr. Ezzell, after reviewing all the screenshots and have a look at your configuration and you are not able to change the arrangement for VIRTUAL LANs, you can try this:
As a work-around to use the router as DHCP VLAN 2 server, you can enable the DHCP server on the router for the VLAN 1, leave 2 IP addresses available, lets say 192.168.1.253 to 192.168.1.254 then go to static DHCP under network and the local network and hire two false addresses to these two IP addresses, so they will not be assigned to all devices. This way you will always be able to use your DHCP server without having to disable the DHCP server on the router
Thank you for pointing out the firmware version very low on your switch, you actually run the firmware that came out of the unit.
Here is a link to the firmware download page:
https://software.Cisco.com/download/release.html?mdfid=283019669&flowid=...
Please upgrade to the following firmware versions:
1.2.9.44
1.3.0.62
1.3.5.58
1.4.0.88Keep in mind that on the 1.3.5.58 version, you must also upgrade the bootcode using TFTP software.
Once you are done with the upgrade of the connection check and see if it works.
-
Data Guard Broker fails with ORA-16635 and ORA-03135
Hi all
I configured Oracle RAC with 11.2 Dataguard on Windows 2003.
I have already configured standby without Data Guard Broker and everything works fine, but when I try to use Data Guard Broker, it cannot synchronize the files of the Data Guard Broker.
I tried everything, including MOS, but not found anything.
I get this error.
Primary
Sleep modeDG 2011-02-11-09:15:41 0 2 0 NSV1: (MIV = 57) Start sending metadata file: "+DG_DATA/orcl/dgbroker/dg_config_file1.dat" DG 2011-02-11-09:15:41 0 2 0 NSV1: Sending block #1 (containing MIV = 57), 67 blocks DG 2011-02-11-09:15:42 0 2 0 NSV1: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken. DG 2011-02-11-09:15:42 0 2 0 NSV1: (MIV = 57) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138532) DG 2011-02-11-09:15:42 0 2 0 NSV1: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Error is ORA-03135 connection lost contact DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken.
DG 2011-02-11-08:35:39 3001000 3 1825138419 for opcode = CTL_ENABLE, phase = RESYNCH, req_id = 1.1.1825138419 DG 2011-02-11-08:35:39 0 2 0 NSV2: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: (MIV = 11) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138419) DG 2011-02-11-08:35:39 0 2 0 NSV2: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: Metadata Resync failed. Status = ORA-16635 DG 2011-02-11-08:35:39 3001000 3 1825138419 DMON: Database ORCLSTBY returned ORA-16635
Hello
CISCO firewalls have a configuration option 'inspect sqlnet' or 'deep packet inspection '. This setting can affect the transfer of certain data on the network and the result in malformed packets or down.
Check if this option is enabled, if it is turn off the option "inspect sqlnet" at the firewall level.
And try again...
Kind regards
Levi Pereira -
expdp fails with ORA-31693 and ORA-01555
Hello
I use Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - 64bi under hp - ux
I export the DB as follows:
password/expdp system.
Full = y.
dumpfile = backup_dir:expdp_$ ORACLE_SID.dmp.
logfile = backup_dir:expdp_$ ORACLE_SID.log.
exclude = statistics-
estimate statistics =.
flashback_time =-"TO_TIMESTAMP\ (\ ' $DATE_EXP\ ', \'YYYY-MM-DD HH24:MI:SS\'\) \" "
It has always worked well, but this morning I received an error message:
ORA-31693: Data Table object "DFE". "' TGV_CONTROLE ' failed to load/unload and being ignored because of the error:
ORA-02354: Error exporting/importing data
ORA-01555: snapshot too old: rollback segment number 1 with the name ' _SYSSMU1$ ' too small
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-08180: no snapshot found on the basis of time specified
ORA-06512: at "SYS." TIMESTAMP_TO_SCN', line 1
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-08180: no snapshot found on the basis of time specified
no idea what that sometimes causes this error?
Thank youThe time that you specified is mapped to an invalid SCN, a SCN beyond the current retention policy used.
You can try more big parameter UNDO_RETENTION or flashback for the more recent time and start again. -
ODI the Package execution fails with ODI-1228 and ORA-20000 not sufficient privileges to analyze
Hello
I am trying to execute the package to ODI to have this error:
Header 1 ODI-1228: GATHER_SCHEMA_STATS-DW_STAGE (procedure) task fails when connecting ORACLE target ORACLE_SERVER.
Caused by: java.sql.SQLException: ORA-20000: not sufficient privileges to analyze an object in the schema
ORA-06512: at "SYS." DBMS_STATS", line 24867
ORA-06512: at "SYS." DBMS_STATS", line 24945
ORA-06512: at "SYS." DBMS_STATS", line of 24899
ORA-06512: at line 2
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:744)
(1) DW_STAGE and DW_REPORT have "ANY ANALYSER" and "UNLIMITED TABLESPACE" privilege and roles "S/n", 'CONNECT' and 'RESOURCE '.
(2) agents are all running
(3) tested ORACLE_SERVER and he succeeded
Need for emergency assistance.
Thanks in advance-
ADI
OK, I solved it.
As part of Oracle under Technologies--> Oracle in the Studio of the ODI, I gave in the uid and password for DW_STAGE and it fixed the problem!
Thank you all for your help and suggestions!
ADI-
-
Build process fails with the error 'and not an executable valid '.
ThinApp does not currently support 64-bit applications. We support the execution of 32-bit applications on 64-bit OS. I would say that the application that you have managed to capture is not a 64 bit application.
-
I use offline files in Windows 7 on a corporate network. Usually, it works very well, but sometimes, when someone else uses a file I get the message in sync results "Synchronization failed with offline files" and the files in question are wrong with the message "the process cannot access the file because it is being used by another process". I want to know is was it interrupted the entire synchronization process or if it is complete and just jump the files in question?
Hello
That your computer is under domain, you must contact the technet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
Thanks and greetings
Maybe you are looking for
-
Cannot restore iPhone 6 s more than 7
so... got the new iphone 7 more today, no matter how many times I tried to restore it since the last backup, it failed at the last hurdle. Thought that I would try through iTunes and it said that 7 has not been run on the latest iOS? I also had to be
-
If I subscribe to the music of Apple, can I bring iTune Match?
-
When I download software or files to the download window opens, the file downloads and is virus scanned and then a message appears saying: "Download Statusbar: virus scan could not start, check the configuration. I had an installation options when I
-
My photos are not in chronological order. Why?
My photos are not in chronological order. Why?. I'm looking at "All Photos". They are supposed to be in order of date and time, but they are not. Can someone tell me (a) why? (b) how to report a bug? Ta!
-
Photosmart Photosmart-queue frozen 5520:5520
My Photosmart 5520 will not let me delete a print past order, so it does not print anything else. It is frozen. I tried to cancel the printing of many times and nothing - it says "delete", but it's not. I turned on the computer, printer, unplugged
Hello
I'm trying thinapp Softelec VPraster (lettering 64-bit) on Win7 (64 bit), I use ThinApp 4.1.6. All by building his error showing as ' %drive_C%\Program Files\softelec\VPraster V11\BatchExecutor.exe: not an executable valid"."» I tried to disable this executable and buiding, but gettting the same error for all executables.
I also captured 32-bit installation of the same application, which is building very well.
Any suggestions?
Thank you.