where the USB ports

Similar Questions

• Where are located the USB ports?

  I think to buy the G60-216EM, but I was just wondering where the USB ports are located, because there is no 360 degree view of the laptop.

  Thank you

  There are 2 USB ports on the right side of the laptop and 1 USB port on the left side.

  I hope this helps.

  Pete

  BTW...

  At the top of this page, you will find a search. Enter the number of the model of the computer and press to enter. This will take you to the support page where you can download the manuals for the laptop you want. You can read and get a pretty good handle on where everything is.

  Have fun.

• Where is the USB port on the printer 4500 hp envy all-in-one

  Where is the USB port on the printer 4500 hp envy all-in-one

  So the question for your answer:

  Compatible products for: HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)

  Color Multifunction and all-in-one HP Officejet Pro 8500 all-in - One Printer series - A909 HP Officejet Pro L7500 all-in - One Printer series Mobile inkjet printers HP Officejet H470 Mobile Printer series Specialty Inkjet Photo HP Photosmart A520 printer range Printer HP Photosmart A620 Printer HP Photosmart A630 Series of HP Photosmart A820 Home Photo Center Printer HP Photosmart B8550

  And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

  For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

  All the best...

• plotter / cut not the usb ports

  I recently moved my office and cutting cutter / plotter in another room. Now, for some reason, my vinyl cutting software does recognize not all USB Com Ports and therefore, will not cut.  (I tried configuring it for each port with no luck). When I open devices and printers and look at USB / series of properties of Strawberry, it shows that its on Com9... and I have 6 USB ports I know.  First question... where I expect to identify the USB ports are what #s.  4 behind the pc and 2 in front.

  Com is a reference to the COM port and is a "serial port".  Replace the USB port.

  PS <>, change the hardware configuration does not cause this problem.   Someone changed the settings.

• Satellite L500 - what is the voltage on the USB ports?

  What is the voltage on the USB ports?

  I would like to connect Transcend StoreJet 25 with USB 3.0. It takes a 5 V DC on USB. How (and where) can I check the voltage in my computer?

  Thanks for help.

  Hi again,

  USB voltage is always the same on each laptop because it s according to the version of USB port. For example, all USB 2.0 ports has the same specifications, otherwise he n t be a standard USB port. ;)

  You can get more information about the USB ports on Wikipedia:
  http://en.Wikipedia.org/wiki/USB

• It is possible to boot on the usb port?

  Hi all

  I would like to know if it is possible to boot on the usb port? I have this message "NTDRL is missing" at the start, I guess I have to reinstall Windows on the machine?

  Furthermore, I would also like to sell my laptop (configuration: 1, 00 G/2 X 256 PM / 40 G/12XT/LM/W). How could I wait fot his laptop? Where can I sell it (it's so hard to sell such a laptop).

  Thank you very much for all your answers...

  Hello

  When you get this message it means that the file Command.com has not been found. Or because he is missing from the boot drive, or your startup drive does not work. The file could also be destroyed because of a mistake. Command.com is used on versions of Windows that load on the BACK as Windows 3.0, 95, 98 and me. Command.com is not used on NT, 2000, XP. They use the NTDRL file to load. The BIOS reads the start section of the reader to know what file to load. If the system is on the NT platform and you get this error, then the boot sector is damaged or the hard disk is damage.

  Well, you write t n what kind of phone it is. How will I know that means this unit cost? I put t know this model.

  Nevertheless, you should check the prices on Ebay.

  Good bye

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• When I plug my Galaxy s captivate phone into the usb port on my computer, it will charge the phone but will not allow sharing of information from computer phone.

  Original title: usb with smart phone problem

  When I plug my galaxy s captivate phone into the usb port on my computer, it will charge the phone but I cannot share the news from computer to phone. In fact when I click on the computer icon, it shows the dvd, floppy disks and hard disk but not the phone. I use a mouse usb and headphones and they work fine. I tried to search for devices and it does not work. I run Defender pro anti-virus software and have checked the firewall, but I don't see that his block the phone. I don't know what else to do. Help, please. Thank you

  Hi Mike,.

  Just to follow up with you on that, that very well may be the cause. Especially when it comes to mobile phones, the real cable you use is very important to have all the features when it is plugged into a computer. Where you can try a new USB cable yet, I hope that whoever is completely compatible with this phone.

• I can't do all the USB ports work - Evesham Style II Mini Office in Windows XP

  I'm looking for the chipset & drivers for my grandaughters computer, AFAIK is drawn next to a reading Speccy.

  O/S

  Windows XP Pro 32-Bit

  CENTRAL PROCESSING UNIT

  Intel Pentium 4 2.80 GHz

  Motherboard

  Manufacturer - Eveshamvale.

  Vend. ATI chipset.

  Chipset model - ID5833.

  Model Southbridge - SB200

  The downloaded manual provides the following information

  Model = P4SBA

  = North Bridge chipset; SiS 651 - South Bridge SiS 962

  CPU = Supports Socket 478 - Supports 400/533 MHz FSB

  I'd appreciate any help possible, that someone can give me as well as the Office works currently can't do all the USB ports work, they worked until I had to change the hard disk, but do not have the installation diskettes or the drivers.

  Hi Graham,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, the USB ports don't work on Windows 7 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  Method 1

  Run this fix - it and check if it helps.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2

  Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  I suggest you to contact the computer manufacturer and download the latest chipset drivers and check if it helps.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Can I connect printer to the usb port on the cable Modem CM100

  Hello

  This may seem like a stupid question, but here goes... I know that the usb port on my Linksys Cisco CM100 cable modem is an optional way to connect the modem to the computer. I wonder if I can use the usb port to connect my HP 1020 laser printer instead.

  The printer is not a network printer, and so I know that it may not work, but I have seen a few cases where a virtual port and install it as a local printer got to work.

  If I can connect the printer to the modem, and then he would give me a way to print from my laptop in the other room.  My printer is just beside my modem configuration and the router. I have a Linksys router WGR614 wireless who sees the devices on my network share, so I think he could see the printer connected to the modem (?)

  I couldn't find the answer to this anywhere. I didn't damage my equipment by blindly try this without knowing a little something. (I assume that the heart of my question is, on the CM100 usb port can be used for any usb device)?

  (I have Windows 7 64-bit operating system, in case you need to know).

  Thanks to anyone who can answer.

  djoseph

  A standard print server will allow you to connect a USB printer to your network. There are models wired and wireless depending on how you want to connect to the network.

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• U2413, calibration solution Ultrasharp fails to connect to display via the USB port

  Dell U2413 SN: CN-0YCM0F-72872-48P-A81L REV A01 August 2014

  Try to run the ultrasharp Dell V1.5.3 on this monitor calibration solution, however, the software stops and displays "please connect the screen to your computer via a USB cable." I click the OK button after you have checked that the USB port on the computer is connected to the USB connection screen, but ultimately, this message appears:
  "Could not establish a connection to the screen. Please make sure that the USB cable is connected and try again. »

  Has tried this on two different computers, running Windows Pro 8.1. One was connected to the monitor cable HDMI to DVI (Thinkpad 10 via docking station), the other using the provided Dell Display Port printer for (Tablet Thinkpad X 230) mini display port cable.

  The USB ports on computers were connected the Dell supplied USB 3 cable to the monitor. Also tried this on a single computer by using a USB 2 port and a USB cable with the same result. The USB connections on the monitor seems to work ok when you plug a flash drive or the i1 Display Pro. Also, did a reset Monitor USB and verified that Windows has seen additional generic hubs when the USB Monitor is connected to the computer. There are 4 additional hubs when you use additional 2 usb hubs and USB 3 cable when using the USB 2 cable. In addition, power cycled the monitor several times (as recommended in the version that is known for this problem) without success.

  Before the attempt to make the calibration:
  A factory reset on the monitor.
  Ran the monitor self test and SUBMISSION. No problem found.
  Monitor purchased from Dell November 2014

  Same result with V1.5.7

  Any suggestions? Where should I go from here?

  I had success in the U2413 of profiling. I pulled out an old workhorse, a Thinkpad T43
  under Windows XP. Then installed the ultrasharp Dell V1.5.3 calibration solution and all
  updates available from Microsoft, but no other software - nothing of the Dell-supplied with
  the monitor. Used the DVI - connection DVI and USB 3 cable supplied with the monitor. The
  software Profiler has worked well with this configuration. When the program first took to the "Start
  Screen measure"(where the problem occurs already noted) Windows (message status bar)
  has reported that he accessed software Realtek 3.0. So I focused on research at the Realtek
  software on other systems.

  On the Thinkpad 10. There were two 1. "Realtek Card Reader" and 2. «Realtek USB 2.0 Card Reader» I have
  removed both and reinstalled the software Realtek for Dell monitor CD. Insert an SD card and
  a USB in the monitor and both were seen by Windows Explorer. There was also a Realtek USB
  3.0 card reader to showing in Manager devices under USB controllers. Using the connections between the T10 to monitor previously described the Profiler software, then ran normally.

  X 230 - I removed the "Realtek Card Reader" (V6.2.9600.30168) software and tried to start the
  Software Profiler and it does not at the same point as before. Then I installed the Realtek USB 2.0
  Software for the Dell card reader. However, there was still no Realtek USB 3.0 card reader
  display in the Manager of devices under USB controllers. Software Profiler is not like before. I then
  inserted an SD card in the monitor and the "Realtek USB Card Reader 3.0" appeared in the device
  Manager. Software Profiler, then ran normally.

  So now my two systems Windows 8.1 software profiling will not work if the 'Realtek USB 3.0 Card '.
  Reader"is not listed in Device Manager. To do this the software must be installed (for example
  starting from the Dell CD) AND an SD card must be inserted into the SD slot on the monitor. Remove the SD card
  Card and the device disappears and profiling software will not run. Insert an SD card and the
  Software Profiler works normally.

  How can I get the "Realtek USB 3.0 card reader ' to automatically load before running the Profiler software?

• How to assign a constant name 'letter' to the USB port?

  My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

  I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

• Keep the power to the USB port after stopping down?

  I would use one of the USB ports to plug in my cell phone to load from one day to the next off the computer. What are the steps to follow to set computer to keep providing power via USB ports after shutting down the computer?  I'm a novice so need to know where to find the place that controls the settings and what to click on. Thank you!

  If you put the computer in Standby Mode when you stop, the USB ports are not powered off.

• I have a Kyocera FS-820, but I could not able to install the USB Port in windows 7

  I need to install my old printer is the Kyocera FS-820 printer which works properly on Windows XP, but when I bought a new laptop which has Windows 7 Home printing USB no longer works. I tried to install the driver, but unfortunately I could not able to find the USB port.

  When I plug the usb PRINTER cable gives me an error of USB DEVICE NOT RECOGNIZE.

  Can someone help me what are the installation step by step in my printer thank you

  It seems that Kyocera has a driver for Windows 7 which you can download from their support site (download file - make sure the file name and where it is being recorded and then search for and double-click on the downloaded file to install it): http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=13988&rid=22655