Similar Questions

• How can I remove Wifi.app from Launchpad?

  According to the online instructions for troubleshooting wifi (which didn't work), I dragged Wifi.app system > library > Services essential to the Launchpad.

  Now, I have a generic icon for Wifi.app ap in Launchpad that I can't remove.

  When I click on it and hold the mouse, there is no "X" in the upper corner.

  How can I remove this icon Wifi.app from Launchpad?

  First of all, go to/System/Library/CoreServices , and ensure that the app is still there. If so, just go to the Applications folder and delete "Wifi.app", so it will be removed from the Launchpad.

• New information or screenshots on 'new Linksys Smart WiFi App improvements?

  can't wait for the new user interface and function push notifications

  From now on, there is no word of the technical team about it, VersusClyne. If there are updates, the application will automatically inform you.

• Using Netgear WiFi Analytics App, it shows R7000 and ghost "Netgear33-arlo_247000".

  When I use several other phone WiFi apps to scan my network, I get the appropriate SSID (standard, standard 5G, 5G of comments, comments) my Nighthawk R7000 router with each corresponding MAC address SSID. However the applications also show a ghost THAT SSID named "Netgear33-arlo_247000" with a MAC address, which is a different character. Same strength, same channel R7000, but the area of the seller is empty display. I have no close neighbours. Clues?

  Thank you - never to look under basic - thank you

• Netflix and YouTube apps crash when the WiFi is enabled

  iPhone 6 - IOS 9.1 - Netflix, YouTube - latest versions (as of 05/12/15) - apps launch, show their splash screen and then immediately crash / close without error message. Router is an Asus rt-ac68u fw 3.0.0.4.378_9313 - question is the same on 2.4 and 5 GHz
  As soon as I turn off WiFi apps work fine - other applications that use the Internet, work fine on WiFi - its just Netflix and YouTube acting upward - and Netflix and YouTube work fine on all other devices in the House - htpc, laptop, android phone, etc.

  So far the troubleshooting steps: uninstall and reinstall applications phone power cycle, reset the WiFi settings, reset the phone to default settings = no change

  Any ideas or and I stuck waiting for IOS 9.2?

  The is probably something in the system software is corrupted and causing the accident. You have two options:

  Restore the phone from a backup

  OR

  If this does not resolve the problem, restore the phone as a new installation of a new copy of iOS 9.1. This one is a bit of a pain, because you have backup you data and then re sync everything (including applications). You may lose data in some applications as you won't be restoring a backup.

• Atrix question switches HD WiFi

  Anyone having problems with the wifi toggle? I can't turn WiFi sometimes. Go directly to the WiFi system doesn't switch on. When I press the toggle, WiFi will try to start but will switch immediately itself turned off. Basically, I can't turn WiFi on the same scan for available networks. I disabled AT & T smart WiFi app, deleted the cache partition and performed a factory reset data... did not help. I have a phone that is 'certified like new' replacement, and 2nd camera did the same thing. Toggle WiFi turns on if I left the phone on some days. I have to tap several times, sometimes more than 20 times, before the WiFi will switch on. The only solution I found is to restart. But it gets really annoying to have to turn the phone market whenever I want to use WiFi. Is there one alternative other than the phone turned off/on every day? I don't have to put out every day so that this phone works properly.

  My phone did the same thing with 4.1.1 I swap AT & T on my phone twice to the same problem. I figure out what caused this good... It does only when the last network, on that I was was 5 GHz. Does not seem to do it when the last connected network has 2.4 ghz

  -Nick

• App of Smart Wi - Fi and Guest Access + Bridge Mode

  Hello!
  I put my WRT1900AC as in Bridge Mode Access Point.
  Everything is OK. But I identify some things not usable, when my router is in Bridge Mode. Such a thing is the creation of a guest for Wifi/guest access account. The Linksys App Smart WiFi offering however, but it does not work. When I put the guest access 'ON' it just stay naturally 'OFF '.
  My question: is it supposed to be the case, or it may become in the future renewed with the software?
  At the same time, I can change a lot of things with this Smart WiFi App, when my WRT1900AC is in Bridge Mode. Proven stuff: Wifi channel number change and change the filter MAC they work correctly.

  With all the Smart Wifi router when the clipping comments wireless value is disabled, because the guest network depends on DHCP for IP subnet isolation.

  Is there a way to keep all the features of the WRT1900AC and the route of a primary network. It is an advanced configuration, because you must configure a static route in your main router and configure the WRT1900AC as a router not gateway.

  Discussion of the example:

  https://community.Linksys.com/T5/access-points/configuring-multiple-routers-in-one-network/m-p/93246...

• Skype to Skype video calls from ipad

  Please help. I used Skype Office for several years to make video calls. Purchased iPad. Skype Donloaded. Can connect, but cannot add contacts. I have a credit on my account. Where can I add contacts

  Hello
  
  First of all, make sure that you have installed the Skype app for iPad (not the Skype WiFi app for iOS).
  
  To get Skype for iPad application:
  
  1. open App Store on your iPad.
  2 locate the application "Skype for iPad".
  3. start Skype download for iPad.
  
  Once installed, login with your Skype account.
  
  It is easy to add a contact in Skype for iPad. You can follow the steps in this link to do so:
  https://support.Skype.com/en/FAQ/FA12132
  
  You can also visit this link to learn more how does Skype for iPad:
  https://support.Skype.com/en/FAQ/FA11006
  https://support.Skype.com/en/FAQ/FA11009
  https://support.Skype.com/en/FAQ/FA12142
  
  I hope that this information will help you.
  
  Maryse

  
  Answering your question or this solve your problem?
  Mark it as a solution and click on the button of Bravo (y).

• I don't see my application after login

  After logging in as a developer I only see the message below after clicking: iTunes Connect

  What is the problem with my login?

  News

  • New in App Analytics

    We have added support for tvOS apps App Analytics, so you can now learn more about your application and its users on Apple TV.

  • Updates and new features

    We have introduced new roles and updated existing ones, you can configure your team access to your applications in more powerful ways. These roles can be managed in roles and users on iTunes Connect.

  I called the Apple support... Looks like they have problems connecting iTunnes...

• Question about HP Slate 7 more 1301 (internal memory and USB)

  Hi all.

  I plan to buy a HP Slate 7 more 1301 soon, however one thing confuses me.

  On one of the user guides I've read online, for this, he says:

  "A micro SD card must be installed before you can transfer files between your Tablet and the computer."

  Now, I've read that for many tablets, 'internal memory' can be used only for applications and others, but not for data.

  So, how does this Tablet? Would I be able to access the internal memory it comes with (the 8GB Nand flash player) and transfer files to it? Or do I have to get a microSD card to add data storage capabilities to the Tablet?

  In the case, I can't use the internal memory to store data via the USB connection, I can at least transfer data to it with another method? As methods based on a cloud, or WiFi apps?

  In my view, that it runs Android 4.2.

  Thank you, any help is appreciated.

  Hi Bremsstrahlung,

  This user's guide have you seen that in, could you put a link? On tablets (especially those without a Manager installed files, or 4.4/KitKat tablets) you would need a computer in order to transfer files between the Tablet internal storage and microSD card, but I have not heard any model for Tablet from HP that require a microSD card to transfer files between a computer and the tablet. All of HP's tablets have a standard micro-USB port with a USB data cable you can connect your computer and access the files stored on your tablet (regardless of the fact that it is equipped with a memory card).

  You can certainly use the Tablet for data memory. Expandable storage (microSD card) is completely optional.

• ea4500 control parental error 2118

  I use my EA4500 wireless router in my home network with success for a year, using the parental controls without major problems, until recently (last 2 weeks).  Now, whenever I try to access Parental controls, either from my Smart WiFi app on my phone, or from Internet Explorer on any computer browser, whenever I try to access Parental controls, I received the following error message: "unexpected error 2118"  We encountered an unexpected error.  If this problem persists please visit our technical support site. "Other features of the router seems to work properly.  I checked I have the firmware updated on the router.  I tried to reboot the router, the modem, all computers to the system, and of course, my phone, but still not the same error when I try to access the parent controls.  The last settings always seem to be in effect, based on trying to access a site blocked since one of the computers, but I can't make changes to parental controls settings.  Anyone have any ideas?

  You need to reset the router to factory settings and reconfigure. Reset to the default values can be made through the user interface.

• EA4500 firmware upgrade failure and subsequent problems

  I had a few problems of intermittent connection with my ea4500 so I decided to upgrade the firmware for the Smart Wifi. I lost my connection to about 90% and could not get the router to connect with my ISP since then.  I am able to bypass it and go straight from the modem to the desktop, but I now have several errors trying to use the router. I tried to hook it up several times but no luck so far.  The errors are:

  Your computer failed to renew its address from the network (from the DHCP server) for the network card with network address 001BFC522BCC.  The following error occurred:

  The operation was cancelled by the user. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  And

  Intel PRO/100 VE Network Connection adapter: Adapter link down

  The problem has created an xbox for emergency home for my 7 year old grandson. Minecraft appealed to him.

  Good thing it's working already. Moreover, with the Linksys Wifi Smart, Cisco Connect firmware update would be uninstalled and you can not use more with the new firmware. You can make changes by access to the content of your Wifi Smart of Linksys account.

  Access your account Smart of Wi - Fi Linksys via a web browser

  Linksys Smart Wi - Fi, frequently asked Questions

  Alternatively, you can install the app from Smart Wifi on your IOS or android devices. Alternatively, you can make changes using the application said.

  Linksys Smart WiFi App frequently asked Questions

• BlackBerry Smartphones facebook on "BOLD"

  I have the "BOLD" and want to know y I can't use facebook blackberry app using wifi. I have personal blackberry email plan.

  No, you cannot use the facebook under wifi app, you need data plan blackberry

• Area permissions Admin subject OBIEE

  I'm trying to accomplish two things related to securing the subject box.  I'm not able to do either with the OBIEE Admin tool as I believe it should work but haven't found a long work around for one using the Administration manage the privileges in the responses.  Here are the two challenges:

  (1) cannot create the table based on security in the administration tools of OBIEE that works when it is deployed to the OBIEE server:

  Location: In the OBIEE administration tool I have:

  • Field 'ARG' who has the following permissions:
    • Authenticated user (defined as reading have no fault in option)
    • GRA Analytics ()set read/write)
    • GRA course Analytics (set read/write)
    • All other responsibilities are defined by default
  • Within the area of topic GRA, I have a table named 'Global' with the following permissions:
    • Authenticated user (defined as reading have no fault in option)
    • Analytics ARG (as default)
    • GRA course Analytics (set read/write)
    • All other responsibilities are defined by default
  • I have a user configuration with the responsibility of 'Analytics ARG' but NOT the responsibility of GRA Secure Analytics
  • The user is authenticated using LDAP by Siebel (where the responsibilities are assigned

  Desire:

  • When the user connects to answers and opens the topic GRA they would see all tables EXCEPT the global table

  Undesirable result:

  • The user is able to see the GRA area but also sees the global table
  • I find users in the groups of roles/catalog and they DO NOT have the role of GRA Secure Analytics ( do not have the role of GRA analytics.)

  Note: My second question which I included below directly impact on the question of the top of the page.

  (2) cannot create the topic in that security based in administrative tools of OBIEE that works when it is deployed to the OBIEE server:

  Location: In the OBIEE administration tool I have:

  • Field 'ARG' who has the following permissions:
    • Authenticated user (defined as reading have no fault in option)
    • GRA Analytics ()set read/write)
    • GRA course Analytics (set read/write)
    • All other responsibilities are defined by default
  • I have a user configuration with the responsibility of 'Analytics ARG' but NOT the responsibility of GRA Secure Analytics
  • The user is authenticated using LDAP by Siebel (where the responsibilities are assigned

  
  

  Desire:

  • When the user connects to only those users with the GRA analytical responses or the responsibility of GRA Secure analytics would see the ARG field

  
  

  Undesirable result:

  • Any user who connects to the responses seen topic GRA area

  Work around:

  • If I connect to answers with my Admin user account I can select Administration-> manage privileges
  • Find the ARG area and then set the permissions of responsibility Through analytics and GRA Secure Analytics as "Granted".
  • When the user logs in the responses with the analytical GRA or the responsibility of GRA Secure Analytics they see the ARG area, but if they don't have the responsibility that they don't see it.

  Problems with work around:

  • Makes assigning permissions in OBIEE Admin obsolete tool
  • Cannot assign table level permissions here and therefore cannot solve the first problem listed
  • Still not sure why to set permissions in the OBIEE administration tool are ignored

  If you could help me find a solution that gets the work tool OBIEE Admin permissions it would be greatly appreciated.

  Thank you...

  Hi Ben,

  I have the feeling you haven't exactly how these things works.

  In the authorization in the 'Authenticated users' administration tool means that every single user in turning to the stage of connection.

  "Read" is enough to see and use (scan on) an object.

  "Read/write" If you want to make updates to your data through OBIEE.

  (2) only members of the roles GRA Analytics & GRA Secure Analytics app must be able to see these topic: 'see' means hide or display in the front end, it's something you manage (as you did in the privileges to manage in the front-end server. If you want to restrict the user to use the subject box (this is what is permission to Admin tool) you will need to attach "Authenticated user" to "No access", all other roles 'Default' (= 'Access forbidden') with the exception of your 2 app Analytics ARG and ARG Secure Analytics roles for which you set the 'Read' permission

  (1) just use the same "recipe" (2): 'Authenticated user' to 'Access forbidden', GRA Analytics also on "Access forbidden" and only Through Secure analytics on 'reading '.

  Give it a try.

  Just keep in mind that Manage privileges works in a different way than the tool Admin permissions. Privileges to manage 'decline' is the highest permission. If an app role has 'decline' and another 'allow' and you are a member of both you will have the "decline" applied to you.

  In the Admin tool, it's the opposite: If one role of the app does not have 'access' and another 'read' and you are both Member you will have permission to 'read '.

• Lightroom mobile on iOS - how to save images in Photos

  I have edited two images in Lightroom Mobile (transferred from a camera in Photos of the iPad WiFi app) and wants to record the images published in Photos. Is it possible to do this? I looked in the options, as well as online and can't seem to find anything.

  Thank you!

  Finally found... You share, select the photos you want, then the next step gives an option to save.