WiFi Broadcom 4313 problems?

Similar Questions

• HP Mini 210 Windows 7 32 bit 4313 Broadcom wireless problem, perhaps.

  I got my mini MP 210 with XP a few days ago House.  I've upgraded to WIndows 7 yesterday.  After installing, everything was humming very well, even the wireless.  I thought it's too good to be true.  Then Windows installed 21 updates.  After the updates that my wireless has been sprayed.  Same problems everyone else has documented ihere.  I think that there is something in these updates in conflict with the driver Broadcom 4313.

  To make a long story short, I found the previous version of the hp/broadcom driver.  The URL is:

  ini-210-PC-Broadcom-Wireless-LAN-Driver-5-60-18-4 http://www.userdrivers.com/notebook-Tablet-PC/HP-M...

  Right-click on the computer click Properties-, and then click Device Manager.

  Right-click on Broadcom 4313 802.11b/g/n (in network adapters), and then click on uninstall.  Check box to remove the driver for this device.  You should be uninstall driver version 5.60.350.6 dated dated 22/03/10

  Reboot, and then install the driver from the URL above.  This is the version 5.60.18.41dated 10/23/09.

  So far, I'm 2 for 2 with my wireless works now.

  My guess is that HP will have to come out with a new driver to fix this new conflict with WIn7.

  It is a follow-up to my original post.

  The old version of the Broadcom wireless driver has not fixed the problem.  WiFi was always intermittent.  Sometimes she would see my wireless home and sometimes she would bring free wireless.  I tried various things throughout the weekend.

  Last night I went to windows update and it says there are two updates to install.  One of them was

  Microsoft Update driver for Realtek RTL8102E/RTL8103E Family PCI - E Fast Ethernet NIC (NDIS 6.20)

  Well after I did this update as all my problems wireless went.  Maybe the Realtek driver has demolished the Broadcom wireless.  I think that HP knew there was a problem and got Microsoft to send the update to fix.it.  Just my guess.

• Problems with Broadcom 4313 tries to connect in an 802.11n - wpa2 connection.

  Hello world. I have a HP dv6 w / a 4313 Broadcom adapter, the House where I live now has a Netgear XAVN2001 router with wp2 - 902.11n configuration. I can see the SSID and password... but after that, nothing happens, there is no solutions in winsows Deputy... If anyone here knows how can I fix?

  Have you installed the latest driver?  See http://h30434.www3.hp.com/t5/Notebook-Hardware/Broadcom-4313-Wifi-Problem/td-p/1587015

• Broadcom 4313 802.11b/g/n does not not on WPA2-PSK AES encryption.

  Hi, I just bought this adapter WLAN HP G62-b13SA Notebook PC is Broadcom 4313 802.11b/g/n his work well on WPA - PSK TKIP, but when I am trying to connect to my WIFI with WPA2-PSK AES or TKIP its not connecting any tried the upgrade and downgrade the driver but still no problem solved. same did the same thing with the ACCESS POINT which is Zyxel G-570. ideas how its going to work or it just does not support WPA2 to all?

  I had a similar problem with this network adapter. I could see the networks, the signal strength was excellent, but whenever I tried to connect, it failed. Several times he connected successfully, but the connection lost after a few minutes. In any case, I managed to fix after spending several hours playing with the options on the Advanced page of the driver. That's what I have now:

  802.11n preamble: Mixed Mode (this is a must if you are networked mixed g/n)

  Afterburner: disabled (not sure about that)

  AP compatibility mode: superior performance (I have a router standards)

  Bluetooth collaboration: disable (everything started work immediately after I disabled it)

  BT - AMP: disabled (not sure about that)

  Mixed cell support: disabled (this is not necessary for typical wifi networks)

  Technology XPress (TM): disabled (not sure, that's something for the performance of g)

  Other options are default values. I use a pilot boarded through Windows Update.

• Acer wifi limited connectivity problem

  Have a fix for the Windows 8 wifi limited connectivity problem?

  With the help of a computer acer laptop with a Qualcomm Atheros AR5BWB222 Wireless Network Adapter on a Verizon FIOS Actiontec MI424WR using WPA2. The first WiFi is fine, then sporatically it disconnects in limited connectiviy every 10 to 60 minutes.

  I think Acer-Tommy means everything is resinstall or update the driver). It came from another forum, but it was the same question and others said that it worked:

  --

  http://www.Neowin.NET/forum/topic/1099385-Qualcomm-Atheros-ar5bwb222-wifi-adapter-no-longer-works-in...

  Open Computer Management
  Click on Device Manager
  Double click on Atheros AR5BWB222 Wireless Network Adapter
  tab pilot selected
  Update driver selected...
  some browse my computer...
  selected Let pick me from a list of device drivers...
  Drive selected...
  navigated to the directory where the driver win 7 was and installed
  (for me, the path was C:\Users\myname\Documents\Drivers\Wireless LAN_Atheros_10.0.0.38_W7x64_A\WLAN_Atheros_10.0.0.38_W7x64\ndis6xWin7\netathrx)

  driver date: 15/02/12
  driver version: 10.0.0.38

• Problems with wifi: Broadcom BCM43142 802.11 bgn adapter WiFi in Windows 10 Pro

  Hi, I have some problems with my laptop wifi card. Product of my cell phone number is: L8R39AV.

  Therefore my main problem in my laptop that my wifi card is a bit faulty. Defective in this sense, it is slow compared to the connection with the wired ethernet connection. To better understand you, I also did a speed test with the wired connection and the connection of the wires.

  The results are:

  1. Wired ethernet: download 25 + speed, download speed 3 +.
  2. WiFi wireless: download 15 speed, download speed of 2.

  I could use the ethernet, but my room is very far from the internet connection...

  Need help please!

  Thank you

  Pavan

  Hello:

  Have you tried the latest Broadcom wireless lan driver for your laptop?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  File name: sp75249.exe

• 15 K1Y78EA #ABZ ENVI: problem with my wifi Broadcom BCM43142 802.11 Wi - Fi adapter on windows 10 bgn

  Hello
  
  I have a problem with my Broadcom BCM43142 802.11 bgn adapter Wi - Fi because I upgraded my windows 8 to 10

  wifi works fine but then after a while a get on the wifi icon's yellow warning triangle, no internet, reviews
  I have to disable and then enable the adapter to operate again, the same problem, but after a while again accurs

  card driver is updated to the latest version 7.35.275.2, the driver date 02/07/2015 via the HP support assistant

  It says no new updates

  Help, please
  
  Thank you

  Hi @HadjadjTaha,

  Thank you for your inquiry.

  I understand that since the upgrade of Windows 8 for Windows 10 your Wi - Fi works fine, but after awhile the icon won't say no Internet and you will need to disable and re-enable the adapter to regain access to the Internet.

  Would check you this setting.

  • Go to the Device Manager
  • Click the network card to expand the list
  • Right-click on the adapter that is listed and choose Properties
  • Click the power management tab
  • If "allow the computer to turn off this device to save power" is ticked, please remove it.
  • Click OK
  • Repeat the process above listed all types of adapters.

  Here is a link to PC HP - troubleshooting wireless network and Internet (10 windows) that can also help.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck!

• Yet WT8 - WiFi signal reception problem

  Hello
  I hope someone could help me!

  I bought a Tablet still 8 a few weeks ago and just after the first start, I found a problem in the reception of the wireless signal.

  When she acquires the signal, there's always between 1 or 2 marks in the indication of wireless in Windows 8.
  I tried initially change the card wifi settings (which is disabling the power saving mode) but without any improvement.

  I compared the tablet with another identical of my colleague and in the same position as his Tablet acquired the signal with no problems, then the mine has not signal.

  So I decided to sent the tablet in support, but they have not found any problem.
  They performed a restore of the system and then sent to me.

  When I restarted, I found the same problem as before.

  I have already installed the latest available Council broadcom driver, available here on the website, but also this way nothing has changed.

  Y at - it a driver update or the setting that I can do to fix this?
  or it's a HW question?

  Thank you for your help

  Hello

  Check if the WLan option in windows power management (using Central) has been defined in the performance.

  You should also go to Device Manager-> card WLan-> properties-> Advanced tab
  Here you will find a few options that could improve the performance of Wlan.

• HP TouchSmart 23SE d-394; WiFi Broadcom drops connect after only a few seconds to a minute

  Only 6 months; has had the problem on and off--especially on - since day 1, but did not notice earlier as seems the last much longer when the Surface is connected to the same source wi-fi at the same time, which is how I am able to stay in contact long enough to ask this question.

  By using an AT & T broadband everywhere NetGear "MiFi" unit.

  1 surface Pro remains connected w / no problem.

  Card Wi - Fi = Broadcom BCM943228HMB 802.11abgn 2 x 2 Wi - Fi adapter

  o/s = Win 8.1, with update

  I went into device mgr, are looking for the latest drivers, and Windows reported best drivers are already present.

  Does anyone else have this kind of problem?   Any ideas?

  It is very frustrating, help or direction would be appreciated.

  THX!

  p.s. I realized that this whole relationship 'Connection of Surface' today...

  Hello phydeau,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your HP ENVY 23se-d394 TouchSmart all-in-One desktop PC loses the WiFi connection since the update to Windows 8.1. I would like to examine and use the HP support document: troubleshooting wireless network and Internet (Windows 8), to identify and resolve your WiFi connection problem.

  If the document that I provided above does not only resolve your problem, please follow the steps, I listed below:

  Step 1. The type of tile Menu "device manager."

  Step 1. Click on Device Manager
  Step 2. Click on network adapters
  Step 3. Right click on the WiFi adapter for the pc and left click on properties
  Step 4. Click on power up
  Step 5. Remove the check mark beside: ALLOW the COMPUTER TO TURN THIS DEVICE SAVE START STOP
  Step 6. Click OK
  Step 7. Close the Device Manager

  NOTE: There may also be checked under the CONTROLLER FAMILY (for example. Realtek PCIe GBE Family Controller which would belong to the title of the WiFi card). If so, you can remove the check mark next to ALLOW the COMPUTER TO TURN this DEVICE FOR SAVE OFF

  If the problem persists after the above please re-post with the number of your product to your computer. I'm a link a HP Support document below that will show you how to find the number for your product. Because with that I can give you accurate information.

  How can I find my model number or product number?

  So if you could describe where your router that would be useful as well.

  Thanks for posting on the HP Forums. Have a wonderful day!

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• Wifi MacBook air problems.

  I run to OS X El Capitan 10.11.5. Since the upgrade to El Capitan, I have Wifi connectivity problems.  My wifi turns either on a random or it will appear under the name now, but I wont have all internet pages will be just stuck on loading. This occurs only at home, I think not that the fault lies with the router because as I said I have the same router with respect, before moving to El Capitan and before the upgrade, I had this problem. This has become incredibly annoying because I have to turn the wifi and turns off again and sometimes the wifi is just stuck on being extremely slow to the point where even my phone a much faster connection. I really need a fix for this because it became unbearable.

  Please read using the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Satellite L50T-B-13U - WiFi / WLan question / problem

  Hi all

  I hope someone can point me in the direction of writing to solve a problem of wifi with my B. L50T OS is windows 10 set to update since 8.1 but at the moment where I never checked if the wifi worked on 8.1. The problem is that the laptop detects my modem Virgin 2g wifi signal but it is impossible to connect. It is not 5g or any wifi neighbors. I checked the drivers, updates them, uninstalled them and bought a new Wlan card but still no improvement. I tried to alsi an external usb wifi dongle but still the same problem. I was wondering if it was a problem with the 10 widows and looked at installing windows 7 but that seems an another headache.
  Thanks in advance for any suggestions

  Hi all

  I hope someone can point me in the direction of writing to solve a problem of wifi with my B. L50T OS is windows 10 set to update since 8.1 but at the moment where I never checked if the wifi worked on 8.1. The problem is that the laptop detects my modem Virgin 2g wifi signal but it is impossible to connect. It is not 5g or any wifi neighbors. I checked the drivers, updates them, uninstalled them and bought a new Wlan card but still no improvement. I tried to alsi an external usb wifi dongle but still the same problem. I was wondering if it was a problem with the 10 widows and looked at installing windows 7 but that seems an another headache.
  Thanks in advance for any suggestions

• HP Pavilion dm4-2165dx WiFi driver install problems

  Product:

  HP Pavilion dm4-2165dx

  OPERATING SYSTEM:

  Windows 7 Professional 64 bit VL

  Description of the problem:

  Impossible to install the WiFi driver. Tried all 3 drivers provided on the support site: Ralink, Realtek & Intel WiMAX. All 3 installers indicate either the WiFi card was not found / detected or the installation program just hangs.

  Changes to the system:

  A clean install of Windows 7 Professional 64 bit DVD VL - required to connect to our domain controller.

  Found a solution.

  (1) to restore the system to factory settings

  (2) save C:\SWSetup\Drivers file on a USB

  (3) install Windows 7 Pro 64-bit

  (4) copy C:\SWSetup\Drivers on HD

  (5) install device drivers

• Yoga 10 wifi and GPS problem

  Hello community,

  I plug a few days ago a YOGA-10 Tablet (data system below).

  I am facing two problems:

  (a) my wireless is very poor. I am often out of wifi coverage and everyone around, with other devices work fine.

  (b) I need the Yoga-10 to test GPS based applications.

  However the GPS is too often lacking.

  I also use MobiWIA GPS status & Toolbox app and trip a 50 kms with my Yoga in the front seat, I get 0 fixed satellites (although only visible 10-11) on 80% of the time (other devices get 100% coverage).

  Any suggestion?

  BTW, as far as I understand, Yoga-1 does not support satellite Glonass, right?

  Thanks in advance

  

  Has taken my tablet from Lenovo service that they replace the display (?) and it worked!

  Now, I have good signal GPS and WI - FI

  Thank you!

• Card Wifi Broadcom 4313GN 802.11 b/g/n 1 x 1

  Does anyone know if my wireless card (Broadcom 4313GN 802.11 b/g/n 1 x 1 Wifi adapter) is dual band? I have a router dual band e4200, but I only seem to be able to connect to 2 GHz. I am running Windows 7.

  Hello

  The card is the only band (2.4 GHz) only.

  Kind regards

  DP - K