WIFI connection shows a limited access.

Router WIFI connection access watch limed. So it was not connect to Internet

1. the router is accessible from other PC. So no problem with the router.
2. I tried to re-setup WLAN connection and WLAN Device Manager hardware. Yet this is
3. when I tried to PING router, it displays a general error and I tried IPCONFIG, address No IP makes its appearance
4. when I check the status of the connection (right click--> status), it shows: sent = 0 and received = 12456.
Can you help me how to solve this problem and what could have gone wrong?

Hi Nini,

Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

Take a look at step 6 in this article. He further explains this problem as possible:

http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

Tags: Windows

Similar Questions

  • Loss of connection with my router, shows only limited access and my network showed that unidentified

    Original title: unidentified network, missing the default gateway

    Hello

    So one day out of the blue I lost connection with my router. I was able to reconnect but this time around I had only limited access and my network showed non-identified. I tried to connect to a different wireless network, same thing. When I run ipconfig, I'm missing a value for the default gateway.

    I tried to:

    -Reinstall the drivers for the adapter

    -update the drivers

    -Reset my router

    -Gateway ipv4 manually of entry

    -kill lan via Device Manager drivers

    -scream at the computer

    I have a Setup to dual boot with Linux Mint along side Windows 7. When I boot in Linux it connects to any network without problem.

    Some help would be appreciated.

    Plug

    Windows 7 Ultlimate

    I7-4700MQ @2.4

    GTX 765M 2 GB

    8 GB RAM

    1 TB + 240SSD

    Realtek RTL8188CE wireless

    Hello Alex,.

    Thank you for your response.

    I appreciate your time.

    I suggest you to uninstall the network driver wireless and reinstall in compatibility mode.

    To uninstall the driver, follow these steps:

    a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

    b. Click to expand network adapters, right-click on the map and click Uninstall.

    c. restart the computer.

    Now you can Download driver from this link wireless.
    Reference:
    http://downloads.Eurocom.com/support/drivers/zip/238/238_RealtekWLAN_W764.zip

    For reference:
    EC http://www.Eurocom.com/EC/drivers (238)

    To reinstall the driver in compatibility mode, follow these steps:

    a. right click the driver file, and then click Properties.

    b. click on the compatibility tab.

    c. click on check "run this program in compatibility mode for" and select Windows XP(Service pack 3).

    d. click apply and ok.

    Now, install the driver.

    Please keep us updated.

    Thank you

  • WiFi is stuck on limited access to Windows 7

    Original title: limited access

    Hey guys,.

    I have a Dell Latitude D620 with 4 GB of ram and a processor Intel Core 2 Duo running Windows 7. My wifi is stuck on a limited access. I tried several different things and none have worked. All other devices in the House connect to the same network so I don't think that the router is the question. Any help is greatly appreciated.
    * UPDATED JULY 2013 *.

    I have since discovered that it is a virus and have performed a 'clean' windows installation 7. Problems are solved and I reinstalled all my programs and I'm on duty again.

    Hello

    Let us try the methods stated below and check if the problem persists.

    Let us try to reset the TCP/IP stack and check if it helps.

    Method 1: See the article given below to reset the TCP/IP stack.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    If the problem persists, try following the instructions provided in the article below.

    Method 2: See the article below.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    If you have additional questions, feel free to post. We will be happy to help you.

  • WIFI connection shows 8 windows limited access

    I use windows 8 enterprise evaluation.i can use network wife but it shows limited often.i disconnect wifi access and reconnect solve.i feel disgust...

    HP pavilion G6-1262er... .Broadcom 4313gn 1 x 1 adapter wifi 802.11b/g/n

    type of security: WPA2-PSK
    I've updated device, he could not solve.uninstall, and install the device couldn't.
    Please respond to my question.what should I do? :)

    I had the same problem of my limited view wifi whenever I connect. After research on the internet for 2 hours and try different options like reset netsh, activate, discovery network, energy-saving change mode, tcip reset, manual ip config, counter download enable etc. nothing worked!

    But then I thought to reinstall my WLAN driver. In my case, my computer laptop lenovo had drivers in the path D:\drivers\WLAN. I launched the setup and re-installed and hurrah, I am able to connect without problem now!

  • IPv6 connectivity shows no network access

    When I want to access online through a WLAN, shows the status

    IPv4 connectivity: Internet

    IPv6 connectivity: no network access

    so I think that my internet speed is going slower than before.

    I also try on the properties of the network and their IPv4 IPv6 & all are in default.

    now I want to know how, which can enable IPv6 connectivity?

    Hello

    You don't need IPv6 to access the Internet.

    If IPv6 is on or Off should not affect the speed of Internet connection (if at all in some older systems it slows down when it is turned on).

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • My network connection shows no internet access, but I can access the internet

    Hardware: Dell XPS 8300

    OS: Windows 7 family

    System type: 64-Bit
    In the network and sharing Center, it is show the connection between the network of Multi and the Internet has an 'X', but I have full internet access.
    Is there a way to fix this?

    Hello

    I understand that you are able to connect to the internet when your computer showing no network connection.

    1. did you of recent changes to the computer?

    I would suggest trying the following instructions and check if it helps.

    Method 1: update the network driver.

    Steps to update of network driver:

    1. click on the Start button.
    2. in the search box type devmgmt.msc, and then press ENTER.
    3. Select the network card device and right click on it
    4. now, select Properties.
    5. in the Properties window, on the driver tab, click Update driver.
    6. After installing the updates, restart the computer.

    For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

    Method 2:

    Temporarily disable the Antivirus and firewall

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • WiFi connected but no internet access

    Good so far, didn't have any problem with internet on my mac mini.

    It connects to my ADSL hotspot and mobile phone, but I can't access the internet or browse.

    In Network Diagnostics it says "internet - failed" and "Server - failed".

    These connections work on my laptop and mobile.

    I tried several times to change the DNS, reset the modem and fiddling around with everything I can that could possibly help without result.

    I forgot to add that the internet is perfectly fine in recovery mode

  • WiFi in my new computer dell laptop with windows 8 limited access list

    I got a new laptop Dell with Windows 8. The wifi connection shows limited and I couldn't access the internet. I have a laptop with windows 7 that works well with wifi, please help

    Hi Carmel,

    Limited connectivity error means that the computer is connected to the router, but the PC has not been assigned a valid IP address.

    Method 1:
    I suggest you try the procedure described in the article and see if it helps.


    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Method 2:
    If the problem persists, I suggest you try to reset TCP/IP. Check if it helps.

    (a) boot to the view from the office.

    (b) open command prompt, right click in the left corner when the window appears and select (admin) command prompt.

    (c) at the command prompt, copy and paste (or type) the following command, and press ENTER:

    netsh int ip reset c:\resetlog.txt


    Note:
    if you do not specify a path of the directory for the log file, use the following command:

    netsh int ip reset resetlog.txt

    (d) restart the computer.

    See the article and check if that helps.

    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • can not find correct for wifi dropouts 'limited access '.

    I have an Acer Aspire V5-571P-6642, windows 8, just bought.  I can't figure out how to get wifi stop randomly say 'limited access '?

    It happens a few times per hour, suddenly a page won't load no and if I wait long enough the wifi will say "restricted access".  If I turn off the wifi and back, the problem is solved in about 15 seconds, but its annoying in the middle of a video or work on homework enough.

    I tried everything I could find in searches... updating drivers, changing the settings to save energy, nothing worked.

    This is certainly the computer.  This happens on any wifi connection, anywhere, and my phone still works when the laptop shuts down.

    Any ideas?  It seems to me (not being not much a computer scientist, most of what I read) it might be a problem with drivers?  As I said, reinstalled and updated but maybe that's always the problem?  I do not know. Thank you.

    PS It happened while I was typing, deleting the part of what I wrote, highlighting my frustration with a machine brand new $800 having failed to perform a fairly simple task.

    10.0.0.217 has not worked for me, I met just this idea in the thread I linked below (don't know how I've seen this in my hours of research before)

    "I had the same problem. Go to their support page, download driver wireless for windows 7 (64-bit if your system is 64-bit) and not for windows 8. It worked for me. I think that there is a problem with the driver wireless for Windows 8. »

    I did, and he has worked for 40 minutes now, which is longer in general, it has been for me.  May be worth a try, I'll repost if it proves to be a dud.

    http://community.Acer.com/T5/Acer-notebooks-netbooks/my-Acer-Aspire-V5-touch-screen-has-a-WiFi-Probl...

    EDIT: Your model may have more choices, I use 10.0.0.42.  I have been online for a while now and that you have not had a single problem, so maybe it's a good solution until there is a new driver.

  • Laptop connected to 2 ISP networks (Ethernet + wireless) - Wireless Connection shows a "yellow Triangle" - no Internet access

    I am facing a network unusual problem with the following network configuration

    1. laptop connected to isps1 via Ethernet - 192.168.0.x (serves as router NAT and DHCP)
    2. same laptop connected to ISP2 network Wi - Fi - 10.1.1.x (router does NAT and DHCP)
    3 WiFi connection shows a "yellow Triangle" - no Internet access

    Note:

    1. neither the connections require Sign-In to access the Internet
    2 Ethernet is defined on top to control configuration\reseau and Internet\Network Connections\Advanced Settings\Adapters and links
    3 operating system: Windows 7 64-bit SP1
    4. the Wi - Fi network has access to the Internet as other wireless clients can connect to the Internet using the same.
    5. here is the weird part - if I disable the Ethernet adapter on this laptop, the "yellow Triangle" - no Internet access on the wireless connection disappears and he now reports "Internet access".

    6. If I now activate the Ethernet back, connection Wi - Fi card always displays "Internet access"
    7. If I reboot, the problem returns - new shows a "yellow Triangle" wireless connection - no Internet access

    6. the question is not specific to this machine that the same issue is reproducible on another computer with 64-bit Windows 8 installed.

    This is expected behavior that has an explanation?
    I can provide more information if necessary.

    Your comments and suggestions are welcome.

    Hello Mohit,

    In this case, you may need to update your network card. Please visit the website of the manufacturer of your system and get the updated driver.

    Let us know if you need additional assistance.

  • Satellite L645 - problem with Internet connectivity Wireless 'limited access '.

    Hi all

    I recently bought a Satellite L645 laptop, however, there is a big problem. Whenever I connect to a wireless network, it will connect in a minute, he removes the connections and said "limited access", he could return by being connected but then back with limited access, so. However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, it is a defective material? software? is there something I can do? Help, please...

    Thank you.

    Hello

    Here the material is ok.
    You must disable for the Wlan to save energy.
    You can do it in 7 QL power management.
    In addition, go to-WLan card-> properties > Device Manager
    You will find a named tab to save energy. You should uncheck the option here that allows the computer turn off the Wlan device to save energy.

  • Error 0 x 80042318 - I am connected to my network, but with "limited access".

    Although I have installed and am running and using the IE Version 9.0.1600., now, I am unable to do a full full Internet_Connection.  I am connected, but with "Limited access" and consequently, nomatter who HTTP://WWW.Address I try to connect, the page always comes back to the page 'WWW.Blank'.    Any assistance that may be available to be appreciated.  Thank you!...      Other info, are as follows: -.

     

    Product... COM event system.
    Problem... Stopped working
    Date of... 25/04/2011 15:56
    State of... Not registered... Signature of the problem

    Problem event name: BEX64
    Application name: svchost.exe_EventSystem
    Application version: 6.0.6001.18000
    Application timestamp: 47919291
    Fault Module name: netprofm.dll_unloaded
    Fault Module Version: 0.0.0.0
    Timestamp of Module error: 4791ad84
    Exception offset: 000007fef23d3820
    Exception code: c0000005
    Data of the exception: 0000000000000008
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional information 1: 98f6
    More information 2: 87675ed52f92c29ca9743f9c4f847526
    Additional information 3: b07c
    Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

    Files helping to describe the problem
    Version.txt... AppCompat.txt... memory.hdmp... minidump.mdmp

    ======================

    Product
    System event COM +.

    Problem
    Stopped working

    Date
    23/04/2011-16:15

    Status
    Not reported

    Signature of the problem
    Problem event name: BEX64
    Application name: svchost.exe_EventSystem
    Application version: 6.0.6001.18000
    Application timestamp: 47919291
    Fault Module name: netprofm.dll_unloaded
    Fault Module Version: 0.0.0.0
    Timestamp of Module error: 4791ad84
    Exception offset: 000007fef2243820
    Exception code: c0000005
    Data of the exception: 0000000000000008
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional information 1: 98f6
    More information 2: 87675ed52f92c29ca9743f9c4f847526
    Additional information 3: b07c
    Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

    =============================

    Product
    System event COM +.

    Problem
    Stopped working

    Date
    18/04/2011 12:55

    Status
    Report sent

    Signature of the problem
    Problem event name: BEX64
    Application name: svchost.exe_EventSystem
    Application version: 6.0.6001.18000
    Application timestamp: 47919291
    Fault Module name: netprofm.dll_unloaded
    Fault Module Version: 0.0.0.0
    Timestamp of Module error: 4791ad84
    Exception offset: 000007fef3cd3820
    Exception code: c0000005
    Data of the exception: 0000000000000008
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional information 1: 98f6
    More information 2: 87675ed52f92c29ca9743f9c4f847526
    Additional information 3: b07c
    Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

    Files helping to describe the problem (some files may be is no longer available)
    Version.txt
    AppCompat.txt
    Memory.HDMP

    Additional information about the problem
    Bucket ID: 215206108 =.

    Product... COM event system.

    Problem... Stopped working

    Date ............... 18/04/2011-19:27

    State of... Report sent

    Signature of the problem
    Problem event name: BEX64
    Application name: svchost.exe_EventSystem
    Application version: 6.0.6001.18000
    Application timestamp: 47919291
    Fault Module name: netprofm.dll_unloaded
    Fault Module Version: 0.0.0.0
    Timestamp of Module error: 4791ad84
    Exception offset: 000007fef3e23820
    Exception code: c0000005
    Data of the exception: 0000000000000008

    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional information 1: 98f6
    More information 2: 87675ed52f92c29ca9743f9c4f847526
    Additional information 3: b07c
    Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

    Additional information about the problem
    Bucket ID: 204865927 =.

    Product
    System event COM +.

    Problem
    Stopped working

    Date
    18/04/2011 12:55

    Status
    Report sent

    Signature of the problem
    Problem event name: BEX64
    Application name: svchost.exe_EventSystem
    Application version: 6.0.6001.18000
    Application timestamp: 47919291
    Fault Module name: netprofm.dll_unloaded
    Fault Module Version: 0.0.0.0
    Timestamp of Module error: 4791ad84
    Exception offset: 000007fef3cd3820
    Exception code: c0000005
    Data of the exception: 0000000000000008
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional information 1: 98f6
    More information 2: 87675ed52f92c29ca9743f9c4f847526
    Additional information 3: b07c
    Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

    Files helping to describe the problem (some files may be is no longer available)
    Version.txt
    AppCompat.txt
    Memory.HDMP

    Additional information about the problem
    Bucket ID: 215206108 =.

    conduit
    Host process for Windows Services

    Problem
    Stopped working

    Date
    21/04/2011-21:03

    Status
    Not reported

    Signature of the problem
    Problem event name: BEX64
    Application name: svchost.exe
    Application version: 6.0.6001.18000
    Application timestamp: 47919291
    Fault Module name: StackHash_9cfd
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 000007fef2d13820
    Exception code: c0000005
    Data of the exception: 0000000000000008
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional information 1: 9cfd
    More information 2: aea2a0d7a408bfb90d70a40b35741536
    Additional information 3: add1
    Additional information 4: e86fd8f76207b04502fc8a8c6058a723
    =======================================

    Product
    Internet Explorer

    Problem
    Web page display problem

    Date
    20/01/2011 16:30

    Status
    Report sent

    Description
    A display of a webpage caused problem refreshing the page using the Internet Explorer compatibility view.

    Signature of the problem
    Problem event name: MSHTMLLAYOUTHARDASSERT
    AppName: iexplore.exe
    AppVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
    ModName: mshtml.dll
    ModVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
    Offset: 0x003D6226
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105

    Additional information about the problem
    Bucket ID: 1530749661 =.

    Fault Module name: netprofm.dll_unloaded

    Fault Module Version: 0.0.0.0

    @ Poppyjoe.Joe

    Find out why this module is still used even if he was apparently discharged?   You can use ProcMon or DepedencyWalker to get more clues to this topic.
    Good luck
    Robert Aldwinckle
    ---
  • Wireless "Limited access" on Win7, but able to browse the web

    Hello

    My adapter wireless displays always the connection either with "Limited access", but I am able to browse the web. This is regardless to connect to public wifi or local wireless connectivity in airports etc...

    Please help on the options available

    Concerning

    Hi Jyothi,

    Thanks for choosing Microsoft Community!

    According to the description of the problem, the wireless connection has limited access.

    Let us try the following methods:

     

    Method 1: Run the Network Troubleshooter:

    Refer to: using the troubleshooter from network in Windows 7:

    http://Windows.Microsoft.com/en-in/Windows7/using-the-network-troubleshooter-in-Windows-7

     

    Method 2: Uninstall and reinstall wireless drivers.

    See the following steps:

    (a) click Start, right click on computer.

    (b) click on properties, click on Device Manager

    (c) expand the network adapter, click with the right button on the wireless adapter option

    (d) click on uninstall

    (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

    Refer to:

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

     

     Hope the helps of information. Keep us informed.

     

  • Satellite C660 - 11K - limited access

    Hi all

    I recently bought a Satellite C660 - 11K, but there is a big problem. Whenever I connect to a wireless network, it connects for a minute or so removes the connections and said "limited access", he could return to be connected, but then goes back with limited access, so backward.

    However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, version - 1002.2.428.2010

    Can someone please help?

    Thank you.

    Hey,.

    There is a lot of discussion on WLAN on C660 then you should check the other forum threads on this issue:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59143
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58744
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57685

    It works for you too?

  • After update to 8.1 Windows, Wifi shows limited access. Convenience store gives error "WiFi has invalid IP configuration."

    Original title: Wifi LIMITED

    Hello administrator, using the lenovo ideapad touch s400 Iam. 2 days ago in day ot windows8.1. My wifi is showing LIMITED access. I can't connect to the network. When I troubleshoot it showing as WIFI a NO VALID IP CONFIGURATION. What to do...?

    Hi Rigaut,

    Generally, this problem is due to not having updated drivers Wireless LAN or IP configuration problems.

    I would suggest trying the following methods and check if it works for you.

    Method 1:

    Try the steps in the following Microsoft Help article and check if it helps.

    Wireless and wired network problems:

    http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Method 2:

    Try these steps and check if the problem persists.

    a. Press/Tap Windows + W keys, type (Admin) command prompt in the search option.

    b. on the command prompt window, type the following command and then press ENTER:

    ipconfig/release

    ipconfig / renew

    c. Close command prompt.

    Method 3:

    Install the latest LAN drivers wireless from the Lenovo site and check.

    Drivers and software - IdeaPad S400 Notebook:

    http://support.Lenovo.com/en_SA/research/hints-or-tips/detail.page?&docid=HT074468

    Please reply with the status of the issue, so that we can better help you.

Maybe you are looking for

  • After Firefox updated itself, extension icons no longer appear

    Firefox itself upgrade 17.0.1 and toolbars disappeared. The icons for the Noscript & Fireshot does not appear, or that they are in the menu system, even if they appear in the add-on Manager. If they are not compatible, how can I go back to the previo

  • Firefox does not work with flash ubuntu

    The first Firefox wouldn't work with flash videos. Now everytime I try to go to YouTube, it crashes. Whenever I try to watch a video on break.com, it crashes. I have no idea how to get flash working in FF. It works in Opera, but not Firefox. I am cur

  • Barcode Excel and read the data

    Hello I'm creating a program where I would like to scan a barcode in LV and there LV scan a spreadsheet excel for this barcode and returns the data in this row. I found an example online that allows the discovery of bar code number in excel, but I'm

  • I have encrypted files on my backup drive. Install the user on the status of CA for access? How?

    How should I keep my new user well that store the same name and all that stuff? If I can access encrypted files?

  • Update of the app photo editor

    I got new retouching app update, but rather update the existing application of editor-in-Chief photo on my phone he installed a new photo editor application what should I do now