WiFi with E535 card problem

Similar Questions

• WiFi with Dell L501x problem

  Hello

  2 days ago, my laptop was connected to my router and works fine. But he then randomly disconnected and have not been able to connect from the back. I use an ethernet cable to access the internet and we have tried several ways to try to solve the problem, but nothing works.

  I have a Dell L501x (Win 7 64-bit) with the card wifi Intel Centrino 1000 BGN. I rebooted the router and the modem and disconnected all devices and tried to reconnect, but in vain. I tried to update the drivers, System Restore and use in SafeMode (network), but nothing works. The modem and router are works well as other devices to connect and access the internet, it's just my phone that can not.

  I'm sure this isn't a hardware problem as the adapter finds all nearby networks. Said that the resolution of the problems "a Director profile didn't get an IP address from the DHCP server.

  I would appreciate your help with this problem,

  Thank you.

  Hello Rick,

  Sorry for the delay. I finally realized the problem - it is the modem/router itself. It is really old and has a security feature where he launched inbound connections if there is already a few presents. Had to reset the gateway IP from the router itself.

  I really appreciate all the help from you.

  Thank you.

• is it possible to replace the wifi with another card?

  Hello

  I have a t400 with intel 5100 wifi card and now I want to install mac os on my laptop.

  problem is that mac os is not detecting the 5100 series of wifi card and I would like to know if it is possible to replace the current model 5100 with an old series?

  Is there any Center of service authorized in Uppsala in Sweden / Sweden for this?

  Thank you

  Limited wireless cards Lenovo Lenovo units certified to work with the brand machine. This is done through a white list in the system BIOS. Recently, I disassembled the last BIOS of T500/W500 (version 3.14 - 1: 06) and discovered the following picture of the white list. It's raw hex big endian joined with what I found by searching for the device ID's are redundant entries to change supplier codes.

  86803 B 428680111000 Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] network connection

  86803D 428680111200 Corporation Intel WiMAX/WiFi Link 5150

  868036428680111000 Intel Corporation ultimate N WiFi Link 5300

  868037428680111200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  868037428680161200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  8C161C008C16350000 Atheros AR5007EG

  EC107281EC1020E000 Realtek RTL8191SEvB (yuck, Realtek!) I wouldn't want one of these...)

  86803 8086:423D 428680161200 Corporation Intel WiMAX/WiFi Link 5150 D

  8680840086801513 corporation Intel Centrino Wireless-N 1000

  Your T400 comes from the same range and has probably the same list. Don't forget, you can buy a Lenovo brand unit.

  Also look for a PM with additional information.

• Shutdown of R500 protected with SD card problems

  Hello

  I have an annoying problem with my Portege R500. When I try to stop my laptop after it wake up from suspend mode, it freezes and doesn't complete the closing (it stops in the last screen before stopping.
  The funny thing is that this only happens if I have an SD card in the SD slot.

  Can you help me?

  Thank you

  Paulo Oliveira

  Hi Paulo

  Can you please give us more information about your Portege? Maybe the model numbers and BIOS version.

• Payment with credit card problems

  Hey there,

  I had some problems with my credit card and they are now solved, would you please submit the request for payment, so I can pay for this month

  Hey Hartendorp/e,

  Please see the Ko: http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html .

  Kind regards

  Romit Sinha

• T400 - VGA on the resolution with discreet card problem

  Hello

  I wanted to connect my T400 to external LCD screen, but I can not put better resolution of 1600 x 1200 on discrete video card with VGA output. Card works Intel perfectly well, I can put it up to 2048xsomething, which is more than enough. But how my Mobility Radeon 3400 to make better resolution?

  I tried many drivers, catalyst but seems that only switchable driver from the homepage of Lenovo works. Some of the drivers cause leakage menu "Switchable Graphics" in the battery meter, some could not even install.

  Please help me, I really connect external LCD with 1920 x 1080 but can not it - related photo

  http://i51.Tinypic.com/xor0ud.jpg

  Moderator edit: Image > 50 k converted to connect by the Community rules.

  
  

• Problem with my Atheros Wifi/Bluetooth Combo card to reboot. in windows 8 pro 64-bit

  Hello I have the following problem with my free wireless/Bluetooth combo card.
  I have personally installed a new combo entered only the material of a third party wireless card
  online market. The device was immediately discovered Windows 8 and installed the drivers that he thinks are best for the device. Both wireless and Bluetooth work as expected and the problem happens when I put the machine power off or reboot the system, Hibernate does not affect the operation of the device. When the system is rebooted / turned from cold start. Windows 8 displays a red X on the wireless icon and Bluetooth does not work. troubleshooting tool and Device Manager act as the device is installed correctly. To resolve this issue, uninstall Bluetooth and wireless both drivers leave system scan for changes, it then reinstalls the device and the system works as expected for both Bluetooth and wireless. I'm looking to solve this problem, I didn't notice any problem yet in the operating system other than windows 8.
   
  Details of important system information:
  Windows 8 Professional. x64bit
  Microsoft Windows [Version 6.2.9200]
   
  Card added to my Asus G74SX
  Operating name: Atheros
  Model: AR5B195 (WiFi: AR5B195) (Bluetooth: AR3011)
   
  The Device Manager shows the follow-up:
   
  Bluetooth
  General tab:
  Qualcomm-Atheros AR3011 Bluetooth 3.0
  Location: Port_ #0001.Hub_ #0003
  Advanced tab
  Manufacturer ID: 69
  HCI LMP 5.39321 a 5.39321 version
  Driver tab
  Driver provider: Qualcomm Atheros Communications
  Driver date: 08/06/2012
  Driver version: 1.0.4.0
  Digital signer: Microsoft Windows Hardware Compatibility Publisher
   
  Network cards:
  General tab
  Qualcomm-Atheros AR9002WB-1NG
  Geographical area: PCI Slot 1 (bus PCI 3, device 0, function 0)
  Driver tab
  Driver provider: Microsoft
  Driver date: 03/07/2012
  Driver version: 3.0.0.130
  Digital signer: Microsoft Windows
  Driver file details:
  C:\Windows\System32\DRIVERS\athrx.sys
  Provider: Qualcomm, Atheros Communications, Inc.
  Version of the file 3.0.0.128
  Digital signer: Microsoft Windows
  C:\Windows\system32\drivers\vwifibus.sys
  Provider of: Microsoft Corporation
  File version: 6.2.9200.16384 (win8_rtm.120725 - 1247)
  Digital signer: Microsoft Windows
   
  Error Viewer:
  Task category: (16)
  The description for event ID 15300 source WPDMTPDriver is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
  PSG WPD driver

  0 x 80070002
   
  Source: BTHUSB
  Event ID: 17

  The local Bluetooth adapter has failed in an indefinite manner and will not be used. The driver has been unloaded.

  I guess the problem with my card is out dated drivers for my wireless card.

  (SOLVED)

  I at first sight, that this would not help, as it does not address the question, or the other.

  1st stage however was a yellow triangle! Sign up for troubleshooting. reboot and I checked for internet/bluetooth. I got my net upward and did two step, windows told me, he had the best drivers for the device. I went to the menu where you select wireless cards then. and it occurred to me, for some reason my wireless card had been cut, and troubleshooting of windows didn't catch it. My G74SX, so now like with most laptops, has a Wireless on and off function, I pressed the button for this and then on my bluetooth and windows wireless. I then tested the function of these two, and did a reboot and shutdown, test market and the system works perfectly. Now, I wonder if that was the problem at the beginning.
  Thank you.

• Need advice with card problem mother strange network card.

  I have a question that is probably some kind of motherboard or power supply problem.
  The card connects with 72.2 Mbit for my wireless router mbit and 100 with the Integrated NIC.
  
  Right now I have bars of 4 out of 5 on the scale of connection and the router just outside the door, but when I try the card against the bredbandskollen.se it never give me more then 4 Mbps download and upload of 16-20. For now, it's 1.6 Mbit download and 8 Mbits upload both with radio and network card.
  
  All other computers on the network will download speed normal 25-55, laptops and other Pavilion with GFX and solid power supply.
  
  I even went up to buy a wireless extension, which can also be used with the thread, but the problem still there never more then download 4-5 Mbps.
  
  I have warranty still, but I feel stupid about the problem because the card is connected with the right speed to the network.
  
  But the rate of download and upload is far away.  And I'm sure that they will conclude that it is connected to good speed when they try against a router, but that's all the download and upload that seem to simply broken. I reinstalled OS even tried other external wireless card but the problem persists.
  
  Would it be the 500-112 eo with a graphics card hogging the PSU, well she was offered with this card, but the motherboard is basically a small size for laptops?
  
  Anyone else having a similar problem with the 500-112eo Pavilion
  
  I should let him return for service, and what could cause this kind of strange problem?

  Hey well today about 2-3 months after the end of the one year warranty, I'll watch some hockey. When I look at computer it seems stop by itself. Strange, I think push button / stop and here a big bang when the flaky PSU finally had enough.
  
  I don't know what to say that it is a shame that HP sells undersized PSU:s in their computers. I knew from the start that there was something strange going on because of the bad connection Wifi, and how it seemed dependent on how many USB devices.
  
  I was smart enough to not send it to HP technicians, it probably saved me 100 euros. Because they would be claimed I had a faulthy complain and charged me. How can you prove there are issues of power.
  
  I'm just glad the monitor didn't die with the 500-112eo pavilion, because it looked like a shot and took the fuse 10amp in the room with her. Tried to move the HARD drive to the external firm to save a date he sounds like a sound signal in agony and refuse to spinn upward.
  
  So I guess that the PSU has HARD drive, mothercard, UC and memories with her on his farewell greatness.
  
  3 years and I would not protest, but 15 months HP should be ashamed of the technician putting this motherboard with this PSU and even more to sell the thing for 500 euros.
  
  Shame on you.

• Ralink WiFi RT5390 802.11b/g/n card problem

  Hi, I don't have a laptop, but it's a desktop with a network problem. I didn't know where to put, so I put it in this section. in any case, I installed Windows 7 on my HP Pavillipn P6 2429 (initially Windows 8) but I encountered a problem with the drivers, I will not connect! My devices that do not work are: Ethernet controller, network controller, SM Bus controller and Bus controller series universal (USB) two. I can't connect to the internet, so I was using a DVD to the drivers.  If you want my ID for the network controller, it's here.

  PCI\VEN_1814 & DEV_539B & SUBSYS_18ED103C & REV_00

  PCI\VEN_1814 & DEV_539B & SUBSYS_18ED103C

  PCI\VEN_1814 & DEV_539B & CC_028000

  PCI\VEN_1814 & DEV_539B & CC_0280

  Hello:

  All the W7 x 64 drivers of motherboard of this model will work on yours.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5231517

  The specific drivers you need for the items that you have posted are:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-104117-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5231517 & sw_lang=.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-104115-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5231517 & sw_lang=.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-103835-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5231517 & sw_lang=.

  Use this driver for the card the 4540 wireless to HP Probook.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-113862-1

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• problem with memory card reader

  bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

  Hi PatPeoples84,

  Yes it is possible, unfortunately it will probably come during the service.

  I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

  Thank you
  Cory

• Problem of WiFi with the Xperia M4 double Aqua

  I disconnect WiFi problem frequent due to double authentication in Xperia M4 problem. Whenever I asks me to enter the password. I use the same WiFi on my Xperia, PS and Xperia L, I do not experience this issue. I tried to use the option to FORGET in the WiFi configuration and reregistered the WiFi connection, but still useless. Every now and then it disconnects with the authentication problem error message. Is it the same with others or I'm the only one facing this particular issue?

  I suggest that you try to repair the phone software using PC Companion..

  Before the repair of your device, you can back up your information first. See this topic for more information on how to.
  How to backup?

• WiFi WPA2 Enterprise with RADIUS - connection problem

  Hello

  I have here a new ISA 570w with the latest firmware (1.2.17).

  Anyway, I can't get wifi to work in mode WPA2 Enterprise with RADIUS authentication.

  Mode WPA2 PSK are not a problem.

  I have configured the BEAM properly and I can connect directly to him via NTRadPing without any problem. Also the test in the web interface works without any problem (see Figure 2, 3).

  The RADIUS server is a server Synology RADIUS on a Synology NAS, which is a FreeRADIUS server under the hood.

  In the settings of the ISA wireless, I put this RADIUS server for authentication (see screenshot 1, 4).

  However, I can not connect to connect to the network:

  On the iPhone (iOS 6.1.3) I get a prompt for a user name and password, but when I click on connect, it says 'connect to 'cisco3'... ". "and stays there.

  In ISA 570w newspaper, he said:

  Information

  Wireless

  MSG = add MAC station in the list of the ATU. VID = 5; MAC = 5 C: 59:48:02:78:3E;

  Information

  Wireless

  MSG = Wireless mode is a 802.11 mixed b_g_n

  When I cancel the connection attempt, he said:

  Information

  Wireless

  MSG = the Client has dissociated;

  On my Thinkpad with Windows 7 Professional I have everything configured as usual (see screenshots 5,6,7,8) but when I try to connect I do not get a command prompt where I wonder username and password, and finally the connection cannot be established (see Figure 9). Also tried with the same configuration on an another Windows 7 Pro installed costs for laptop with the same problem.

  I can't see any attempt of 570w ISA to authenticate anything in the logs of the RADIUS.

  Also the capture of network traffic on the LAN to the Synology NAS port does not show the RADIUS datagrams.

  I already disabled COP because I read that it can cause problems, but it did not help.

  Can you please suggest something else I can try?

  Thanks in advance!

  Kind regards

  Dominik

  I saw these screenshots, but that screen settings just select the button set up next to the authentication method in the section user authentication, under users.  In each of your screenshots, the RADIUS server identification number is 1, so I would also ensure that I configured the server ID RADIUS 1 that can be configured by going to users-> RADIUS servers.

  All that said, I have seen that your tests have passed and I also do not understand the point of having the RADIUS settings on other screens and then to have info ID RADIUS.  My thought is that you'd be able to pre-set RADIUS users of-> screen RADIUS servers and then select the RADIUS server ID in all other screens without having to enter the RADIUS news over and over again.  He also thinks that you could ignore the users-> screen RADIUS server and enter RADIUS information over and over again and it should work... as you set up initially.  However, based on the past experience of programming errors, I recommend configuring the ID from RADIUS server 1 under user-> RADIUS servers if you have not already... just in case where.

  Shawn Eftink
  CCNA/CCDA

  Please note all useful messages and mark the correct answers to help others looking for solutions in the community.

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• Card problem OBIEE - points on the map illustrated with two different images.

  VI have obiee 11.1.1.7.1 where we have an analysis with a card.

  The base map and the theme is created in 11.1.1.7.3 mapbuilder.

  VI have a variable shape layer in the OBIEE plan. The shape is a circle, and has four different locations (using four different colors to show the differences).

  A query can show 20-30 positions on the map.

  So far so good.

  When we run the analysis, the following occurs:

  1. circles of 20-30 (with one of four different colors) are presented correctly on the map. These results appear directly on the map once we click on "Apply"

  2 an hourglass appears and we will have to wait for 20 to 60 seconds.

  3 then an "x" appears in each of the 20-30 circles and the hourglass disappears. The 'x' is the mapbuilder theme that we created if we do not have any Style 'Render' associated with the Style. If we have a rendering style, for example a simple small point, this point then appears with the circle.

  Our question is how we can force mapbuilder for not making the 'x' in the map. That's where we get terrible response time.

  
  

  Best regards

  Joel
  

  We have solved the problem using only the datawharehouse data to generate BI data layers.

  We have created a new BI data layers using variable forms. Then, we chose a layer of bridge custom rather than use the MapBuilder theme that we created earlier. Then, we used the points Long/Lat for the generation x and y.