Win 7 activate problem BIOS installed at the factory to operate non-vista 0xc004f035

Similar Questions

• My laptop cannot start or repair itself, Windows has been installed at the factory, so I have no boot disk, is there a way to get a free boot disk?

  I had problems with my laptop for a few weeks, I used Chkdsk to fix the problem she was having. Yesterday the comp froze while I was using firefox and when I reset windows not load and cannot repair themselves. My OS was installed at the factory, and I have the product key, but Windows no disk. Is there a way to fix my computer without buying another drive in windows?

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  and if you need a startup repair disk;

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Dell Inspiron Laptop with Vista installed at the factory does not start.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

  Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

  If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

  Sorry we can't be more helpful.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can you identify this element of Vista installed at the factory... it is hardware or software?

  I have a desktop HP Pavilion Media Center under Windows Vista Home Premium. I am trying to solve a problem with the TV Tuner. I tried everything I can find to solve the problem, but without success. I just need an answer to this...

  On the bottom of my computer, I see a list of hardware and software that has been installed at the factory. I am interested is displayed as "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL".

  My question: is - this software or hardware? If it is a software, I can't find to uninstall and reinstall, which is what I would do. If it is hardware, what it look like? I would like to locate and replace it.

  Thank you

  Back to the original question, to which I have the answer. "GENUINE WINDOWS VISTA HOME Premium DIGITAL TUNER" is Microsoft Vista which is loaded on the hard drive. It is NOT hardware and software it's my operating system.

  There is no guessing what is in my PCI-E slot. It's My Nvidia GeForce 9800 GT 1024 MB graphics card. There is no tuner embedded, or "video" as you call it.

  To finalize my contributions to this post, I have fixed my original problem I came here looking for advice for in the first place. It's actually a corrupt Windows operating system file that runs my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the TV tuner works fine.

  Thank you for making at least an attempt to help out me. As you can see, over 6 billion people on the planet, only came forward... I appreciate it.

  Mr. Fix It

• Why uninstall Norton 360 will not be installed at the factory? I'm running a new antivirus

  Why uninstall Norton 360 will not be installed at the factory?  I'm running a new antivirus

  It starts to uninstall (the small circle thang) then stops

  I know that with AVG, you must visit the AVG site to install an uninstall program to remove the program... seems absurd, I know, but that's what's happening with AVG... I don't know if something similar should be done with Norton... but you should be able to disable it... right click that the Norton icon in the tray and you should see options, which will be disable IT are other ways, I don't know, but I haven't used Norton.

• Help! installed at the factory lost programs after the failure of the hard drive!

  Hello
  We run windows Vista Edition 32-bit home premium.  Installed at the factory we have Microsoft works and many options, and additional games. After we have made of our hard drive wiping and a clean install of windows Vista again these elements did not return to the top... We have done this before and it was something we had to do to get these things once again, but I forgot what it was.

  We have no shadow on our hard drive... we have removed all the shadow copies and all the windows of OLD files, etc... We needed a drive completely clean.
  Can someone please tell me how to restore the other options?

  Also since the reinstallation of Vista we have many games that once installed so see the as installed in the control panel in Add Remove programs but are not of anywhere in the computer in the list of programs or in a search?

  Thank you
  Wisfamily

  Hello WisFamily,

  Thanks for posting on the forums.

  Quick questions, did you use a Windows Vista DVD to perform a clean installation of Vista? You have a set of disks of restoration of the manufacturer of your computer or you have separate disks for Vista, Applications and drivers etc. ?  You've probably used your before restore disks to restore your computer to factory settings where it will be wipe your drive and perform a clean installation of Vista with your applications. Please check the disk set you have and check with the manufacturer on how to perform a full restore of your system.

  Hope that helps, please post back and we do know.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Windows installed at the factory.

  How can I tell if my laptop is equipped with an operating system installed in the factory or not?

  Look for the certificate of authenticity attached to your computer.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Click Start, right click on computer

  Click on properties

  Scroll down to the product ID

  You should see listed in the product ID OEM

• Windows will not activate a re - install using the key printed on the netbook, I have

  I have an Acer Aspire One netbook on which I had to reinstall the operating system because of problems I had. I tried everything to reinstall the OS W7 Starter edition try the recovery disk method or check with the manufacturer (out of Warranty warranty so no support) and without success. Now, when I tried to activate the version of Windows 7 Starter Edition that I had installed on a drive that I bought with all versions of W7 less any key, Windows does not recognize the key, I entered even if it is printed on the bottom of the laptop on the MS license that I HAVE. I have even a paid upgrade to Home Premium I tried to apply in order to activate the operating system, but it says I need to activate W7 Starter first before the upgrade.

  Need some advice what to do.

  Windows 7 Starter Edition is actually installed?

  Click Start, right click on computer

  Click on properties

  Go to the Windows edition section

  Does say Windows 7 Starter?

  If this is the case, try to use phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• FOUR installed at the factory DEFAULT to leave prevents the DUAL BOOT LINUX

  HP laptop: dv7-4173us

  Current hard disk partitions:

  Size (approximate) volume file system status

  (C primary NTFS Partition 444 GB)

  HP_TOOLS (F): 99 MB primary FAT32 Partition

  Recovery (D primary NTFS Partition 21,28 GB)

  Primary SYSTEM NTFS partition 199 MB

  I came across this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-disk-management-UTI...

  I want to install linux in dual boot, but the link above from Microsoft, said a MAXIMUM of

  4 PRIMARY partitions is allowed.

  Currently I already have FOUR primary partitions on my laptop HP as factory default PARTITION!

  What is the SYSTEM partition?

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-boot-partitions#1TC=Windows-7

  Excerpts:

  “.... The system partition contains the hardware and the startup folder indicating a computer where to look to start Windows. By default, Windows 7 creates a separate system partition when it is installed from scratch (as opposed to upgrading from a previous version of Windows) on an unpartitioned hard disk. This partition is 100 MB in size. “

  Looks like I need to remove one of the main partition above.

  And it also looks like my choices are:

  HP_TOOLS (F): 99 MB primary FAT32 Partition

  Recovery (D primary NTFS Partition 21,28 GB)

  What are the consequences of the removal of one of the scores of HP.

  I suspect the HP_TOOLS above (F and recovery (D are dependent on each other.))

  I understand, it's likely that I lose the ability to recover and have to reinstall windows directly from CD/DVD.

  But I have TO install Linux in DUAL BOOT.

  What choices do I have?

  Please advice.

  Thank you.

  hpng wrote:

  I finally got to work, including by using:

  https://help.Ubuntu.com/community/boot-repair

  Hoot Hoot!

  In install Ubuntu LTS 14.04, it allows to installtion of lights-out auto side by side.

  I noticed that the (NTFS, FAT32) file type is not displayed for the Ubuntu partition in the disk of wind 7 management.

  So, what is its file type?

  There are two Win 7 bootloader when the laptop starts.

  Here's the boot options for dual booting:

  Ubuntu

  Advanced options for Ubuntu

  The memory test.

  The memory test.

  Windows 7 (loader on dev/sda1)

  Windows 7 (loader on dev/sda2)

  First boot of Win 7.

  When I select the 2nd choice (last), I got error "Info: the boot selection has no b ' cos a required device is not accessible."

  Which partition is dev/sda2 corresponds to?

  How will I know?

  I also tried to delete the partition HP_TOOLS after successful install Ubuntu and dual boot,

  but WIn 7 has said it is currently in use, and force the deletion can cause problem.

  What should I do?

  Thanks for all the help.

  Linux uses a different label than Windows. Windows using C, D, E... drive, but linux uses sda1, sda2, sda3 (sda means the disc and 1,2,3, partition) labels for partitions. The sda2 partition is probably the 100 MB system. Linux also uses different file systems incompatible with NTFS/FAT32 for Windows file systems. The most common are EXT2/3/4 and also swap which is something like a pagefile (pagefile.sys) on Windows. You can delete the partition HP_TOOLS of linux, but if everything works and you do not need more partitions don't do that. There are stored diagnostic utilities. However, you can create a USB key with the same properties as HP_TOOLS partition:

  http://support.HP.com/us-en/document/c03801890

• Failed to install during the installation of Xp on vista

  Hi all

  I installed Vista laptop wih Dell Inspiron 1525. I tried to install Xp SP3 on another drive, but the Installer failed with a message that some files in media is write protected. Now, I'm not able to boot with either Vista or XP. I can't find any solution.

  Please help me how to solve this problem.

  Kind regards

  Naveen

  If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HAL.dll is damaged or missing. Installed at the factory of W - XP without installation cd

  Windows does not start.  Message: \system32\hal.dll is missing or damaged.

  W - XP was factory installed/Dell machine, no installation cd as backup to fix/incorrect file copy.  Any help is appreciated.

  Fortunately, I think that the technical support engineer will not.

  That the Support engineer should have said is "I don't know how to solve this problem without a Windows XP installation CD".    It would be the most accurate.

  You are usually not necessary an installation CD of Windows XP for this common problem.  Given that most of the people do not have, and this common problem is solved all the time, what do you think they do?

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.  This shortfall in crude in the development of MS Answers forums unnecessarily prolongs solving simple problems.

  If your system has a CD/DVD drive, you can make a bootable CD from the Console of the Recovery XP (no XP media required) and undertook to solve your problem.

  Support engineers or the moderators of the Forum, you would be so kind as to post please the instructions to make a bootable XP Recovery CD of Console, when there is no available XP media.

• I bought a dell inspiron 1440 without any operating system. What should I install first, the dell drivers or windows vista?

  I use the windows vista installation disc supplied with my previous pc. I tried to do a clean install, inserted the disc into the cd/dvd drive. No installation window. The screen says "windows loading files..." After a few hours, the display shows something like

  "" windows has not... error: file boot32.exe is corrupt or not found. "."

  Then the Dell XP disc is great to use. However, do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software (unless you have Windows 7, that allows to record the .isos natively) - as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty.

  Then you unfortunately discovered why the phone was for sale.
  MS - MVP - Elephant Boy computers - don't panic!

• Microsoft Office (OEM) installed at the factory on a Dell computer

  Hello

  I am extremely disappointed with Dell and Microsoft.

  My 3 years old Inspiron 660 customer s had a hard drive failure. After replacing the hard drive, I proceeded to perform a factory restore. The recovery process has not worked!

  I was afraid that my customer has paid a lot of money to buy Microsoft Office when he ordered from Dell in 2013. I talked to Dell support and they confirmed that the factory-installed software is not included in the recovery partition. Dell do not provide software disks. I then talked with Microsoft and they said that they provide no downloads for OEM, only commercial versions. In addition, they understand the dilemma of my client and are sorry.  Now it's *!

  So here we have a classic situation where no company of billions of dollars will help a customer.

  I wonder what other Dell customers do when they lose software because of the failure of the hard drive?

  Thanks for listening to my rants.

  Innovation of PC,

  Have you tried the link below to download office?

  Desktop download

• Bad BIOS installed on the Satellite A200

  I had one laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty. I researched and downloaded many programs, but I don't have a USB floppy drive. I downloaded phlash16, created an autoexec.bat file and follow all directions I've read on different post of different Web sites.

  Can someone please help me to recover my BIOS using the virtual floppy drive to USB and can someone please give a process step by step on how to reflash the BIOS. My laptop is Toshiba Satellite A200. Please give me a BIOS for my laptop.

  Please email me [email protected]

  Any help will be much appreciated. Thank you.

  Hi mate

  > I had a laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty

  I'm afraid, you will need to contact the ASP in your country in order to solve this problem of m

  Toshiba driver page contains no traditional BIOS updates but only focus on the Win BIOS update, this means that you will not be able to update the BIOS by using a floppy disk because you don t have a traditional BIOS version

  Get in contact with the ASO technician, they can help you!

• With problems of backup of the files on my Windows Vista computer

  original title: backup of files

  Should I back up my files because my laptop needs to be repaired and my manufacturer says they will delete all my files when they fix it. Can I do it myself with a plug-in or should I have a professional to do? I don't know I can even do that because even if the power led lights up the screen remains white and it beeps constantly.

  Hello

  If the screen remains blank and you have the error beep codes that normally indicate a hardware problem, I suggest you take it to a professional to get your data before handing over to manufacturers of laptop for repair.

  There is information below in this answer as to how you can recover your data if you are comfortable with the process of making

  but it involves opening the laptop

  For your information:

  to ensure that the beep codes mean you need to know what is the bios of your laptop and then read it as the links below average error codes

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.computerhope.com/beep.htm

  Read this on the record of your data:

  as you can not start your machine due to a suspected hardware problem you can use a linux-based cd to recover data when there is a problem with your hardware that a linux cd must still use to operate because it uses your laptop hardware to operate: card mother etc.

  To save the data:

  1 remove the hard drive from the laptop and it slave in another computer

  2 buy or borrow a USB disk drive hard case laptop insert in it, then connect the speaker to another computer

  Use anyway to try to read the data on this portable hard drive from another computer