Win Med play want to recognize any disc, I tried several multifunction devices

Similar Questions

• My E drive stopped reading CD/DVD. I have a desktop compaq with Vista Home Premium w / all service packs downloaded. My E drive doesn't recognize any disc in the drive.

  How can I get my E drive working again?  I inadvertently stopped a backup file and ejected from the disc without it completed stopped.  Now, he does not recognize the disc.  Please help me.  Computer: Compaq (Desktop), Windows Vista Home Premium, Service Packs 1 and 2.

  Hello

  Check with the support of Compaq, their online documentation and drivers and their forums for
  known issues.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• Equium A60-199 is not play or recognize any type of cd or dvd

  Hi all

  It's the first time I was in the unfortunate duty position post one problem-normally I can find a solution here and just fix it myself!
  I have an a60-199 on windows XP Home Edition. It is about 18 months and unfortunately out of warranty. The issue I'm having is that the cd rom drive (a carpet * s uj-830) is not play or recognize any type of cd or dvd. Finally, I used about a week ago and have tried resetting the system to forward, then nothing works.

  I also tried the suggestion of microsoft to change IDE transfer parameters, and that no longer works. When I put a disk in it turns three times and the light on the cd drive flashes, but he can't find anything, and I get the message ' d: / is not accessible. the request could not be performed because of an i/o error "I also websearched that but found nothing else than the suggestions above that has not worked."

  Is it possible that the link between the motherboard and cd rom to be broken yet light and spinning cd happen? I am completely confused and would like to have suggestions from anyone!

  Thanks in advance,
  Fyldelass.

  Hello

  Don't reset the system how you used recovery media to set to factory settings? If so, I think that there must be a hardware malfunction. The drive has power and I think that the problem is not connection but damaged drive.

  The drive is original and also compatible with this unit. The assignment of pins is just. Before trying anything, you can try to remove the disc and check the contacts. Maybe they should be cleaned. If nothing helps, I presume that the replacement should be performed.

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• DVD/cd/rom won't recognize any kind of disc vista home prem 64

  CD rom just stopped working? When I run the test it does not recognize any type of cd or dvd? Help!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• My new Dell win 8 PC does not recognize my CS5 install disc.

  My new Dell win 8 PC does not recognize my CS5 install disc.

  I'm ready to upload to the web, but I can't find the right site.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Satellite P855-307 is not play the latest Blu - ray discs

  The Toshiba Blu - ray disc player is is more grateful or play the Hollywood movie Blu - ray discs.

  The recent Hollywood film set of Blu - ray discs in both my Pioneer HDD-Recorder/Blu-ray player and play on my PS3, it is why blu - ray discs are fine.

  Drive Blu - ray on the satellite p855 works so I can play Blu - ray movies non-Hollywood on my Satellite P855 (e.g. "in the shadow of the Moon") as well.

  This also indicates that the Toshiba Blu - ray disc player software can work, so something else is preventing the operation.

  BIOS 6.80 VICTORY
  Version of Toshiba - 1.05.207 Blu - ray disc player.
  Is Blu - ray zone B and 5 changes remain (never has been changed).

  There is no firmware update on the support site of Toshiba for the BD - ROM Pioneer BDC - TD04S.
  Satellite P855-307 runs the original OS (Win 7 HP 64-bit).

  Read the Readme to Toshiba Blu - ray disc player mentions AACS key renewal, although I don't see any way mentioned anywhere by which's made it.

  Corel WinDVD is of no assistance as a player, as well as the trial version of WinDVD 11 recognizes only Intel HD4000 graphics.

  Trial version of CyberLink PowerDVD can't read Blu - ray Disc movie Hollywood but will play non-Hollywood films such as "In the Shadow of the Moon".

  It seems you have a problem to play only some specific BD discs.

  I m not quite sure that your problem, but from my point of view it may be a problem of firmware of BD player. Unfortunately, Toshiba driver page does not only updates the firmware for the BD drive so will not be able to try a firmware update.

  I put t think there is a problem with the playback software (Toshiba Blu - ray disc player) because it seems that you are already using the last available Toshiba Blu - ray Disc version 1.0.5.207 player. If the software is already up-to-date.

  However, the freeware VLC player software/tools are supported BD disks too and play almost all formats and file standards.
  Recommend you test just to see if the problem still occurs even by using such usefulness of these tools.

• After the new installed hard drive, DVD player, not to recognize any media

  given that I had a new hard drive installed my dvd will not play any type of media, or play any DVD including those that I burned to a disc, since the new drive has been installed. I tried to download the drivers and utilities, I got with my comp. but like I said it will not read. I even tried to download dell canada drives, but still no help. also, my webcam does not work as well and again tried to download from disk but no luck.

  Hello

  ·         What happens when you insert the CD into the CD/DVD drive?

  ·         Do you have an error message when you try to play the CD?

  I suggest you try to fix this problem automatically by clicking on Fix It in the steps below:

  Step 1:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  Step 2:

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Step 3:
  Your CD or DVD drive cannot read or write media - Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If the issue still exists post returns with the information requested in questions.

• HP Envy 15 - q47002 i7: laptop overheating, does not recognize any USB. Even in the Bios.

  Hello

  I bought this product last year, so my warranty wore off.

  My laptop is overheating and it is very slow at this point (even videos are not working well). I tried to clean it up but it was without result.  I want the game and computationally intensive applications, but I'm afraid of the motherboard or hard drive failure.

  Now to the point. I can't install the new OS, any OS because this laptop doesn't have a DVD player and it doesn't recognize any usb 2.0 or 3.0.  I tried to change the options in the Bios and I tried to uninstall and install the drivers (they are up to date).

  What should I do? I can't install a new system because of this problem, and I can't use anything more demanding than youtube which is really annoying since this laptop has good specifications.

  I am currently running Windows 8.1 which I got when I made a purchase.

  I hope someone answers!

  Thank you.

  EDIT: In the Device Manager it says device not installed with yellow exclamation point. By Usb or ext hdd. And it will not find the device-specific drivers. As I never need them on another PC or laptop.

  Hi @HarunC,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP ENVY 15 t-4710HQ i7 Quad Core Notebook and questions with serveral fuctions works do not. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  With the USB not recognized by Windows.  Here is a link to solve the USB connections.

  I would like to uninstall everything cited first in the list of universal serial bus controllers.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link if you need to download drivers USB Intel for Windows. This is a utility to update.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• ArcSoft PhotoImpression 6 - when the dvd is in fact I can not play the television-says damaged disc

  When the dvd is in fact I can not play the television-says damaged disc. But he plays on the computer. I want to play on television.  Also I have a number of pictures on this program in the files and want to sort by number. = How do I do?

  Perhaps you should ask to Arcsoft?

• Computer does not recognize the disc in the cd drive.

  original title: media player 11 does not recognize the disc in the cd drive.

  Media Player 11

  I use Windows XP oper. system, my windows player works fine execpt when I place a cd in the drawer of rip to rip to my library WMP does not recognize that there is a disc in the drawer of thr. The problem started after I installed a vinal record of pc system, but he has always recognized that the disc was in rip drawer, if I put the disc in the drawer and WMP has closed and reopened. then it started to not recognize that a disk was in the drawer, even if I closed and reopened WMP with the disc in the drawer. Any solution to this problem would be greatly appericated. Thanks George

  Hello

  Remove the filter upper and lower filter and see if it helps.

  r: clickStartand then click run

  b:   In theOpen box, type regedit, and then click OK

  c:   In the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  d: in the right pane, clickUpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. ClickUpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step g.

  e: in theEdit menu, click delete.

  f: when you are prompted to confirm the removal, clickYes

  g:    In the right pane, clickLowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section"next steps"to learn how you can find more solutions or more help on the Microsoft Web site.

  h: in theEdit menu, click delete.

  i: when you are prompted to confirm the removal, clickYes

  j:    Exit Registry Editor.

  KC: restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  Windows media player dvd region

  After you apply an update to the media player, I now get the error message

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  natuarally ive checked the area defined for the reader and even tried to re applying the region

  I then noticed its doing the same thing with dvd stored on my media server, and while he would not even play MPEG or avi stored on my hard drive

  I went to my comments to logon (standard user) media player works fine

  so I'm back and tried to reinstall the mediaplayer to my admin login, it wouldn't let me not delete it, ran Media Player microsoft penalty shooter, he said everything ok

  so I changed the guest account on an admin account to try to remove it from there, but as soon as I did this mediaplayer stopped working in the feedback connection that leads me to believe its a sort of level access virus, that has permeated the media player or a defect in this connection required to complete admin update media player

  Hello

  ·         Have you tried the steps in method 1 of troubleshooting?

  ·         Do you have any code or an error message when you try to uninstall Windows Media player?

  Method 1:

  You can try to connect the different DVD player and check if it works.

  Method 2:

  You can re - register wmp.dll file and check if it helps.

  (a) log on as an administrator.
  (b) click Start, type cmd in the Search text box, right-clickcmd.exe, click run as administrator, and then click on continue.
  (c) at the command prompt, type regsvr32 wmp.dll press ENTER.

  Method 3:

  You can also try to create a new administrator user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Optiarc cd - rw crx880a ata device will not recognize any cd

  I have an acer laptop. It is an Optiarc cd - rw crx880a ata device. It will not recognize any cd / dvd... He appears with insert the cd. I open and close the cd drawer and always the same pop-up.

  My operating system is windows vista.

  Then you know that the drive is bad. You will need to buy a compatible optical drive, Acer or an after-market reputable dealer. Since it is a laptop, you can buy the disc just for her. Yes, it's probably easy to replace. Refer to the manual of your computer or search for a manual on the Acer tech support site. MS - MVP - Elephant Boy computers - don't panic!

• Vista does not recognize any disk in the disk drive

  Vista crashed when I was loading photos on a cd.  Since then every disc I put in - music, software, data are not recognized, it turns but no program starts automatically.  If I go in via Explore and click the drive the disc turns, then I get the message "Please put in a disc.  Any help gratefully received

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.