Win Vista does not recognize Toshiba MQ01ABD050

Similar Questions

• Win.Vista does not boot.hd charges up to a point, then for a split second a bluescreen apears and it stops itself.

  Win.Vista does not start. HD charge up to a point, then for a fractio of second bluescreen apears {no time to read} and he stops himself. then he tries to start again alone. This cycle goes on and throughout the day so I do not unplug the device. I don't have a win. recovery disk. can I do about it? Thank you for your support

  Hi adiroya,

  You have made no changes to the computer before the broadcast took place?

  Disable automatic reboot and capture the exact error message.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 1
  Step 1: see if you can boot to the desktop in safe mode by disconnecting all external devices except the keyboard and mouse.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If you are able to boot to the desktop, perform the clean boot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 2
  If you are not able to boot to the desktop in safe mode, then try last known good configuration.

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista does not recognize is not my dvd burner

  Vista does not recognize is not my dvd burner when I inseret a blasnk dvd/cd it does not appear as a pilot

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• My Windows Media Center (Win 7) does not recognize my msi DIGIVOX TV Tuner

  My Win & Pro does not recognize my MSI Digivox USB TV Tuner card. Any other tuner software I install recognizes it. I have run the install, uninstalled and reinstalled the drivers and cleaned as best I could. The Windows Media Center Receiver Service is working and has begun. Is there a list of steps I follow troubleshooting or maybe an upgrade to WMC I should install. The current version is 6.1...

  If I try the same card on a Win7 laptop it works fine as well.
  A little confused.

  Hey Jef,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, I understand that Windows Media Center does not recognize the MSI Digivox USB TV Tuner card in Windows 7, but works in the same TV tuner card on the other computer. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

   

  Method 3:

  a. click the Start button.

  b. in the research area, type turn on or off windows features and press ENTER.

  c. expand the multimedia option.

  d. uncheck Windows Media Center.

  e. wait that changes take place.

  f. click OK and restart the computer

  g. Repeat steps to place a check mark next to Windows Media Center.

  h. wait until changes take place.

  i. click OK and restart the computer.

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Satellite C55T: Win 7 does not recognize the card, LAN and WLan

  I have a problem.

  I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
  Windows does not recognize my network connection and it didn't install my wireless driver.

  Maybe I need a chipset driver, but I found no drivers for windows 7.

  Please help me!

  If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

  A5222 C55T satellite is the portable American model.
  The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

  Choose here the drivers / updates & filter by Windows 7 64 bit (left)
  Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• Re: Win XP does not recognize the art Store 1TeraByte external HARD disk

  my xp does not recognize the art Store 1TeraByte external HARD disk.
  In the past he woked fine.

  I tried to connect it to another computer with XP and it works very well.

  If I understand well there is no driver to download for this disc. It is plug ' don't play.

  There is no massage.
  other devices that I connect to USB also works very well,

  Thanks for your help.
  Eitan.

  Hello.

  You tired to update the chipset drivers?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Windows Vista does not recognize my Canon powershot A710IS

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  ===================================
  Maybe your AutoPlay settings need to be adjusted.

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  The following items may be worth a visit:

  (927836) a still digital camera is not recognized
  in Windows Vista or in Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Windows Vista: Using the scanner and Camera Installation Wizard
  http://grok.LSU.edu/article.aspx?articleid=10705

• Computer Windows Vista does not recognize the USB mouse

  Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

  worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

  Hello

  
  1. do you get an error message?
  2. would either not detected other USB devices in the same port?
  
  Method 1: perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  
  Method 2: run the Fixit and see if the problem is resolved.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: update the chipset drivers and see if the problem occurs.
  Note: you must contact the manufacturer of the computer to update the chipset driver.
  
  Hope this information helps.

• Vista does not recognize my drive sata hard.

  • I have a Sony Vaio and this laptop is running Vista on a drive sata hard and the hard drive failed, I am trying to load Vista on a clean hard disk SATA of Toshiba. Vista does not see the hard disk and can not find the drivers for the SATA hard drive. I called Toshiba and they said that the hard drive is plug-and-play this is why there is no drivers and asked me to call Sony to the motherboard drivers. Sony said that you need for the Vaio recovery disc. I ordered the recovery disks and still have the same result. I have checked the BIOS and can not see anywhere to set up a sata drive. What can I do to fix this?

  Hi Dl54,

  A. is the hard drive is detected in the BIOS?

  B. what happens when you restart the computer?

  C. you get errors?

  D. What is the exact error message that you receive?

  You can check if the drive is detected in the BIOS, but will not all SATA configuration option in the BIOS.

  I suggest you to download the SATA drivers on the Sony site on a flash drive and load it during the installation.

  After that you start from the vista DVD, follow the instructions on the screen to install vista. You will see a screen where you choose the partition to install vista. You will find an option to load a driver on the same screen to the bottom of the left hand of the window.

  Click load a driver > Browse to the location of the drivers and start installing the drivers.

  Please answer in return.

  Bindu S -Microsoft Support

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• Vista does not recognize Avast!

  Hello all :) - for the last 3 months or more, Vista will not recognize that Avast! is running and antivirus protection. I've been running Avast on Vista early IE May 2007 and not had this or any other problem. I was hoping that it would fix itself, but no luck... I'm confused as Avast! tells me that everything is fine. Does anyone else have this problem? What can I do? I have Vista Home Premium, to date and legal lol. Thank you all very much. This is a wonderful forum!

  I find the rest of the article in support of Avast, try it and he could solve the problem:

  https://support.avast.com/index.php?_m=Knowledgebase&_A=viewarticle&KBArticleID=580

  I also believe that you could contact Avast assistance by phone, if you forgot the password for support or you can click on password to the website to reset your forgotten password.

• Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.

  I looked at the information system and noted that there is a device error.  After checking for a solution online, this is the message I got:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista does not recognize the auto-disque external eSata hard.

  I just bought 1 external to external drive "Fantom". My Vista 32-bit Home, does not recognize automatically, I have to restart every time for Windows vista to recognize the drive. Y at - it a fix for this problem? I have a dual boot and Windows XP has no problem to access the drive after plugging in.

  My Seagate eSata drive not present all the time.  If you right-click on desktop and select manage... go to the Device Manager and click Scan for hardware changes.  This is why the drive appear every time.