win xp restarts in Mup.sys after I installed side to side backtrack 5

Similar Questions

• 5 k iMac restarts on its own after you install 10.11.4

  Hello

  I installed 10.11.4 March 24 (I think), and since that day my iMac has been unstable. It restarts on its own, like a kernel panic, but never logging in a kernel panic. This restart does not seem to be triggered by software I run because I removed some things to try to isolate the problem.

  Yesterday Apple Support told me reinstall the operating system via the startup cmd - r option, and that did not solve the problem... he ate just one hour of my time.

  Any suggestions? My iMac is spent super stable and super unstable; now, it's worse than my pc game Windows for stability.

  It closed completely and restart with a chime, or is it just disconnect you?

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP hangs at mup.sys on startup

  MY DESKTOP FREEZES AT MUP. SYS ON STARTUP.  ANY IDEAS ON WHAT IS THE CAUSE?

  I think what AreilMT is getting in the light of the HARD drive blinks is the following:

  If you have a chkdsk scheduled to run at the next reboot (by responding affirmatively to the question, if you choose to run a chkdsk at the next restart), or if XP finds that any volume on your system that has been marked 'dirty', chkdsk will run when you restart.

  If you start in Mode without failure and chkdsk begins to run, the last thing you will see on the screen is mup.sys having been loaded... then the chkdsk will run in full.  Your system seems to be stuck.

  If the system appears to be hung on mup.sys and the HARD drive light flashes, it could be that the chkdsk command does what it is supposed to do or what you told it to do - check the volumes for consistency.  If this is the case and the HARD drive light flashes, you have to wait outside and which could take many, many hours depending on the size of your drive HARD, how many things about him and what chkdsk is to do.  Let it sit overnight if you must, but be patient.

  If this is NOT the case, then I suggest you power down, unplug everything except the keyboard and see if you can boot mode safe with only a keyboard attached.  If you have a PS/2 keyboard to use, I would use that instead of a USB keyboard.  A USB device or faulty driver can sometimes appear to hang on mup.sys to the system.

  It is also important to understand that the problem is not with mup.sys (it has already loaded) - it's what comes after mup.sys that could be the problem (if it is not running chkdsk).

  This is why there is zero logic when people see this scenario and begin to try to figure out how to replace mup.sys - that is not the problem, since it has already loaded.

  The next thing to load that sometimes causes problems is often the drivers keyboard and mouse - especially USB keyboards and mouse devices (mouse), therefore, you must unplug everything - especially USB devices.  You only need a keyboard plugged to press F8 to display the Advanced Startup Options, and then select Safe Mode and a PS/2 keyboard must be used if you can get your hands on one.

• Another question of restarting the MUPS

  A former Church accountant called yesterday.  His computer has been restarted.  I went through a few things, starting with LNG, then passed over.  In safe mode, he did the usual list.  After MUPS.sys, it restarts.  I tried the Safe Mode (all 3), Normal, good last known (LKGC), etc.  I then tried the advanced options.  Debugging came with the BSOD with the 0 x 0... 7B (on forums I see it and 7th regularly, 7B) where it crashes.  I ran the diags BIOS & no problem.  I tried PE of Bart, WinPE with ERD Commander, TechMaster 2006, Hiren 9.5 with reboots or BSOD.  EBCD brought me for some things, but he had problems.  She has finally found its XP SP2 CD, so I tried to make in this, but it gets to the GUI (probably around MUPS.sys) and rebooted, including safe mode.  I found Hiran 9.7 (misguided in my folder of CD), & it worked, so I just ran a quick memtest and CPUZ, then let him test the HD (HDTest or HDTune or something like that).  As he ran, I brought to the top of the box CMD typed memtest and explained how to operate when HDTest was done.

  Today, after Church, I came back with a FD & performed a running MemTest + (4.1) one pass, now 6 SpinRite is testing the drive.

  The computer is a HP Pavilion with a 2.2 GHz Dual core Intel, 4 GB DDR2, 500 GB HD (about 25 GB used, a normal installation with another recovery - 15 or 20 GB partition as I remember) I could see with EBCD & Hiran) and a M/B IPIBL-LB.  She put it in a network with a new HP Pavilion (a1640n).  I don't know which box did its accounting data on it - or if the two don't.  (I has not implemented its network, I'm just helping low-cost when his computer gives its problems the weekend & his ordinary man will then come).

  Suggestions?

  Thank you

  John

  Hello

  This problem may occur in the following scenarios.

  ·        Boot sector virus

  ·        Device driver issues

  ·        Hardware problems

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

   

  Method 2:

  I suggest you back up the data that are present on the system and then do a format Windows XP clean installation. To back up the data that is present on the system, install a parallel installation of Windows XP and then back up the data and then perform a new installation of Windows XP.

  Follow method 4 that is listed in the article given below to perform a parallel installation of Windows XP.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Once you have made the parallel installation, and then follow the steps mentioned in the article below.

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot boot safe mode or any mode - hangs on the mup.sys driver

  Can someone help me. I did some research on the internet and see that it is a familiar problem. I have been using a usb and someone removed without doing safely - storage key my laptop then froze and the only thing I could do was turn it off at the power button.

  Now I can't do anything - it just goes to several times on the same page saying that there was a problem to choose a way to start - I chose alone and nothing - it loads until the mup.sys driver and then just goes to the same page again. I'm out of ideas.

  Can anyone help?
  I'm trying to avoid the recovery disk that I really want to lose my job yet, but realize that might have to happen, you mind I read reports that it even still hangs when you try this option.

  Thanks Rachel

  Hello

  AFAIK the mup.sys is placed in the folder C:\Windows\System32\drivers and it s responsible for the control and the start-up of the operation of the system at the lower level (control of the printer or the graphics card, etc.).

  If your computer loads all the way up to mup.sys then your HARD drive should work. If he died it would not even charge anything at all. It would not even try to load this file.
  It is likely that this file is corrupted just.

  If you re not able to run the Win operating system and use the System Restore tool, so I put t see any other possibility to use the Toshiba Recovery CD.
  To save important files, you can remove the laptop HARD drive and connect the HARD drive to another computer via the USB interface.

• Unable to start XP in safe mode, stuck at mup.sys; BSOD with installation disc

  My computer is a computer laptop Asus eeePC 1000H with no material changes and default OS. I left the machine all night and came to see the machine with the error text:

  "Reboot and select proper boot device."
  "or Insert Boot Media in some boot device and press a key.

  Restart in safe mode gave me the same error, except that I could see that the boot process failed at mup.sys.

  Then I tried to repair my installation by using a Windows XP installation disc so I could use the Recovery Console, but I got a BSOD and error:

  STOP 0X0000007E (0XC0000005, 0XF75DE0BF, 0XF7A2A208, 0XF7A29F08)
  PCI.sys-address F75DE0BF base at F75D7000 Datestamp 3b7d855c

  I have turned off unnecessary equipment in the BIOS and still have the same result. The next step here is to erase completely the machine and retemplate TI - something I'm eager to avoid.

  I've been surfing on support forums all morning and I noticed that there is a spike in people with this problem. Is there a virus going around or was there a windows update last night? I use McAfee if it makes a difference.

  From your description of the problem, it sounds like the hardware failure, no software (virus). First test the drive and RAM. Since you don't have a CD player with eeePCs, you need to use bootable USB based on keys of an external optical drive or troubleshooting tools. Or, if the computer is under warranty, contact Asus support.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).
  MS - MVP - Elephant Boy computers - don't panic!

• Error 0x0000007E on normal startup, Mup.sys on SafeMode boot blue screen

  original title: BSOD on normal boot, safe mode startup Mup.sys

  So today, I got 18 updates on my laptop and Microsoft Office. I did both at the same time on both computers and my laptop lights no more.  My office works very well. two of my computers have XP Pro on them.

  If I boot in safe mode it hangs

  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\System32\Drivers\Mup.sys

  If I boot normally I get a bluescreen with

  Technical information:
  STOP: 0X0000007E (0X805BA6EC, 0XBACCB2B8, 0 X 80000003, 0XBACCAFB4)

  My bios is A05 which is common for a Dell Latitude D810.

  Is there a fix or is dead XP?

  Hello

  You have a Restore Point before this happened?

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Visit this link before you restore just in case that is your problem.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/276904c0-e775-4AC9-92b3-8abf465f8d4d

  Try a restore of the system to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  -----------------------------------------

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  More information on troubleshooting blue screens below.

  -------------------------------------------------------------

  Stop the automatic driver updates as below - use these methods when you want to update the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I keep genuine win 7 in my laptop lenovo after formatting hard drive?

  How can I keep genuine win 7 in my laptop lenovo after formatting hard drive?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• Does restart/reboot the computer after installing or uninstalling a program?

  Original title: does restart/reboot the computer after installing or uninstalling a program? Which option is it on Vista? Hit reboot? Or off, wait and then start up?

  I was told that if you add or remove a prgram, after it installs you need to 'reboot '.

  Is this true?

  Does this mean that, after the program is installed, you must reach the restart button? Or press 'stop' and then again wait a minute and then be able to save the PC?

  Hello

  Often an installation or uninstallation of will need to reboot to complete and it never hurts except for the
  time it takes.

  A reboot is usually sufficient.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I work on my sys after every 15 min to 20 min my mouse and keyboard does not work

  Hi all
  Please can someone give me a good answer

  When I'm working on my sys after every 15 min to 20 min, my mouse and keyboard work not and totslly my sys cling...

  Hi Suresh,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems your keyboard and mouse stops working, and also Windows 7 crashes.

  I will certainly help you in this matter.

  1. What is the brand and model of your computer, the keyboard and the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Follow the steps in the link.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• After you install demo of problem Adobe DC Pro... meets an unexpected failure. Running Win 7. Any ideas?

  After you install demo of problem Adobe DC Pro... meets an unexpected failure. Running Win 7. Any ideas?

  

  Hi garym66400483,

  Please perform this cleanup tool to uninstall Acrobat Download Adobe Reader and Acrobat tool - Adobe LabsDC, reboot your system & reinstall it using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know how it goes.

  Kind regards
  Nicos

• I have a win 7 dvd retail and I did clean install and says now I can't activate

  I have a win 7 dvd retail and I did clean install and says now I can not activate because I only have a dvd upgrade how do I clean win 7 off the coast to put xp on and do it all again

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• I pay Charter for 100meg a dry... After you install Firefox v20.0.1, now I have 3.5meg a s... What happened to my system?

  I am running Windows XP Home SP3. I had been using Firefox v4.0. I didn't give it up. I finally decided to update today (05.06.2013). I get 100 MB dry by charter.com for the last year or so... After I installed Firefox v20.0.1 and restarted my system... I always restart after the installation of new software... my internet connection has been lowered to 3.5 mb a second I tested it by going to speedtest.net and speedtest.charter.com. .. .i called Charter around 21:00... We went through the whole process... all power off and unplugging everything... speed never changed. The guy said that the modem looked good on his end. Then... something has changed on my system, my system is not the way it should be... all programs that I have internet access have the same problem... Help, please...!

  These test sites use the Flash plugin, so you can control the problems with this plugin in.

  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting