Win7 won't start plus-HP Pavilion dv7-6b32us

Similar Questions

• Pavilion dv7-6b32us: that means start diagnosis failure ID QC6C51-5R67HW-QFPH4K-402BO3?

  HP Pavilion dv7-6b32us laptop

  Start-up took like 15 minutes so I did some diagnostics and received a failure id QC6C51-5R67HW-QFPH4K-402BO3

  The operating system could be zero, but not sure.

  What is the error? Can't seem to find anything online. Very much appreciate your help.

  Thank you!

  It seems that the hard drive has failed/is a failure and should be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• HP Pavilion dv7-6b32us fan hums when fast running

  I have a HP Pavilion dv7-6b32us and within these last few months my laptop heats up enough easy and when the fan starts very quickly it will sound and it vibrates enough that I can feel it a little bit in the top left area of the laptop, the only way it stops is if I type this field quite difficult. I guess this means that bearings or something on the fan are slaughtered, and it must be replaced. I tried to clean the area fan of the best that I can (if there ever a lot of dust on the inside), but if I remember the last time I took apart, I can't make it very easily without removing the motherboard, so I have to clean the fan with the lid on. Is there a way to solve this problem, or if not, where can I get a new fan?

  CaseyF wrote:

  I have a HP Pavilion dv7-6b32us and within these last few months my laptop heats up enough easy and when the fan starts very quickly it will sound and it vibrates enough that I can feel it a little bit in the top left area of the laptop, the only way it stops is if I type this field quite difficult. I guess this means that bearings or something on the fan are slaughtered, and it must be replaced. I tried to clean the area fan of the best that I can (if there ever a lot of dust on the inside), but if I remember the last time I took apart, I can't make it very easily without removing the motherboard, so I have to clean the fan with the lid on. Is there a way to solve this problem, or if not, where can I get a new fan?

  Hello

  Take a look at the service guide.

  http://h10032.www1.HP.com/CTG/manual/c03043778.PDF

  Your laptop must have a shared program Intel 3000 then choose the heatsink / fan for Intel UMA memory:

  http://www.eBay.co.UK/ITM/666392-001-new-HP-dV7-heatsink-fan-/360733774145?PT=LH_DefaultDomain_0&hash=item53fd689141

  How a manual with pictures from page 46.

• HP Pavilion dv7-6b32us - no sound

  Pavilion dv7-6b32us Win 7 64 bit.

  There is no sound from the internal speakers.  Last update of IDT Audio received 11/3.  Didn't notice any sound shortly after this.  OBD reported no sound internal speakers.  Do I need an updated driver?

  Thank you!

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Bluetooth on HP-Pavilion-dv7-6b32us

  I try to connect headphones for my laptop HP-Pavilion-dv7-6b32us. I have two different models that I'm trying to connect to my laptop: Nextware Sonic and Järv, both through bluetooth headphones.  I tried "Add a device" via the Control Panel, but the devices don't pair or appear.  I can not find bluetooth in the Device Manager.  Are there any drivers, I can download the software on the computer I can activate for this problem or I have to buy a bluetooth dongle?
  
  Any help would be greatly appreciated.
  Thank you

  The specifications do not indicate that your model has bluetooth so yes, if you want, you'll have to get a dongle.

• Pavilion dv7-6b32us - max and the type of RAM I can install it?

  Hello

  For the pavilion dv7-6b32us, which is the type and maximum RAM I can install?

  The manual says it can go up to 16 GB, but I don't see that 8 GB (4 x 2) available for sale in the world.  We do not know also what type I need.

  Thank you...

  Hello

  Please check this:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-6b32us-upgrades.html

  You can buy from them or use the information to buy elsewhere

  Kind regards.

• Upgrade processor for HP Pavilion dv7-6b32us

  I have a

  HP Pavilion DV7-6b32us,

  Motherboard: HP 1802
  BIOS: HP F.1C 23/01/2013

  Processor: Intel Core i7-2670QM CPU @ 2.20 GHz (4 c 8 t 2.8GHz/3.1GHz, 2.8 GHz BMI, 4 x 256 KB L2, 6 MB L3)
  Socket/Slot: CF PGA988

  Memory controller: controller DRAM Mobile HP Core (Sandy Bridge) 100 MHz, 2 x 8 GB DDR3 SO - DIMM 128-bit, 1.33 GHz

  and I would upgtradee processor. I have an Intel i7-3820qm think about it and I was wondering if it works or if there is a better choice?

  Hi Sholling,

  Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have a question about upgrading your processor. On page 89 and 90 of Maintenance and Service of Guide , you will find a list of compatible processors. The Intel i7-3820qm is not on the list, but there are several processors in the list. You'll also find instructions on the replacement of the processor.

  Thank you

• Need old BIOS for HP Pavilion dv7-6b32us

  Hello

  I have a HP Pavilion dv7-6b32us which has BIOS installed F.19. I want to try an older version of the BIOS if possible. Can someone please post links to the old BIOS for this laptop. Laptop was purchased in the United States.

  Downgrade bios procedure advice would be appreciated.

  Thank you.

  Hi all
  When I posted my original question, only bios F19 is available for download. I checked the HP website again today and to my surprise now previous two versions of the bios are also available for download.

  In case a person at HP has decided to post links to older versions of the bios after reading these forums, then its totally awesome. I am impressed.

• Compatible WiFi / Bluetooth combo card for Pavilion dv7-6b32us laptop computer?

  Hello

  I want to replace the broadcom WiFi (b/g/n) with a combo (WiFi / bluetooth) card in my HP pavilion laptop dv7-6b32us;  preferably with one that supports the frequencies a/g/n.

  I know I can install only cards that are supported in the bios. Can someone tell me please to the list of the WiFi cards supported by the bios of my laptop?

  Thank you.

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c03043778.PDF

  Support without wireless/bluetooth combo cards with HP part numbers are in Chapter 3, page 29.

  Pleaee be careful since you have an Intel processor, look at the list of cards for all models or just models of Intel.

  I can tell you that there is no double card band supported. The 6230 listed Intel is incorrect. It's the wrong part number and if you order this part, you get either an intel or 1000 ralink card. Person on this forum or at HP knows that the correct reference number unfortunately.

  You can install one of the supported cards and it must have the part number HP on it or it won't work.

  Paul

• Win7 won't start no-Pavilion dv7-6059eo-a the hard drive failed? Contact HP?

  Hello

  I have already experienced some minor problems with my HP laptop, as crashes and freezes and error startup. Now, yesterday I came home vacation and discovered that my PC did "feel well" when I used it. Sound had been delayed and delayed, processes and programs froze frequently, including the Task Manager. I decided to just restart and went for a shower, half an hour later when I came back to my PC it was trying to close the session, without success. I used the power button to shut down physically, and when I tried to start it up, I was allowed to choose whether to start the PC normally or in "safe mode", as expected. I started normally and it has frozen on the 'Starting Windows' screen, the animation wouldn't even start.

  I waited several minutes for Windows to start and, eventually, windows cursor appeared on the screen, but it was obviously the wrong resolution (much bigger (and wider than what is proportional) and fuzzier than normal), then I got a blue background (However, this was not blue, it was like a wallpaper) and the come command prompt thingy indicating exactly what :

  Microsoft Windows Script Host Version 5.8

  Copyright Microsoft Corporation. All rights reserved.

  REM model:

  Legend of the REM: Hitachi HTS725050A9A364 ATA Device

  REM DeviceID: \\.\PHYSICALDRIVE0

  REM SCSIBus: 0

  REM SCSIPort: 0

  Scores of REM: 4

  REM PNPDeviceID: IDE\DISKHITACHI_HTS725050A9A364___PC40CH0A\5 & DDFF 3299 & 0 & 0. 0.0

  REM

  REM

  REM [RESULT]

  REM couldn't Scout because could not detect 2 hard drives on this system

  C:\System.sav\util\MBRINST. / Ini EXE C:\System .sav\util\MBR. INI/U/Q

  ECHO MBRInst returned %ERRORLEVEL% > C:\system.sav\logs\MBRINST. JOURNAL

  I leave the PC for half an hour, and when nothing happened, except at the prompt closing itself, I rebooted, it the same way as last time. This time when start I had to choose between 'start Windows normally' and 'Start Startup Repair (recommended) '. I chose the option recommended and expected (because I used to get these before the crash too). But ultimately the same black screen and the enormous-too-big-cursor appeared, then he went blue and then the command line came, stating the same message as I wrote above.

  It is, essentially, as far as I got with the PC after the evening of yesterday and today. I also noticed wave, repetative sounds coming from inside the PC, looks like a frog, very very small is trapped inside. I tried the F8 menu at startup and chose to start in "safe mode" but there is no difference.

  I would be totally grateful for help, because it was a ~ $1400 spent and I got it for a few months...

  Thank you for reading

  My

  Hello

  Error 303 would indicate a hard drive failure - this is also compatible with the freezing issues you describe leading up to this event.

  Your best option isto contact HP and arrange for the hard drive replaced under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

  

• Cannot start the HP Pavilion dv7 - Intel(r) WiFi Link 5100 AGN

  the WiFi has been disabled by the Device Manager, and I can't activate it

  When I get in the Device Manager, one! sign was shown next to Intel(r) WiFi Link 5100 AGN, and I click Properties, the device status displays the message below:

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on "Find solutions", it displays 'could not load driver software' and no solution appears

  I tried the function "update driver" and still no idea to him.

  not the product. My dv7 is VQ971PA #AB5. Model no. dv7-2124TX is

  Thank you!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same question so you must call HP tech support and get the replacement of the part.

• Satellite A60 - recovery disc won't start plus-disque no bootable error

  Hello

  I set the boot sequence to boot from the cd, but the message reads: no bootable disk.

  I tried to open it with ghost, but looking for a password.

  Toshiba Satellite A60.

  Hello

  First you will not be able to extract the ghost image file because it s set as you could see.

  I put t know why you can't boot from the recovery CD Toshiba. But reasons could be:
  -The CD is defective (zero, not more readable)
  -You used a bad CD
  -The CD/DVD drive can not handle this CD because of the lens of the laser drive old and faulty.

  Then you should check first if you can start on other Microsoft Windows CD to see if the CD/DVD drive is ok.
  If it is ok, then there is a problem with your CD!

• won't start plus-nouveau windows 7 Home premium - missing the name of the product, config, ser #, product #.

  problem at startup - lack of prod. name, number, config, & ser. #. Had messages windows is not genuine, bought another windows 7 Home premium & installed. Same message indicating the lack of information, does not start correctly

  Hello

  To resolve this issue, contact with CV. How all the information here (just choose your country).

• Satellite L50 - A - 1 c 7 won't start plus-erreur 0xc0000225

  Hello

  I had a 128 GB ssd in my laptop (hard disk enclosure) and 1 TB of toshiba hard drive but now I got a new pc and the ssd's in the Office
  now I want to reinstall windows on my laptop but I still have this error 0xc0000225

  I have the recovery cd and a bootable usb key but even when I change the boot order, that I continue to have this error, there is also an option to press f8 but when I do this the screen flashes

  can someone help me?

  laptop: toshiba satellite l50 - a - 1 c 7

  now, I've discovered that my hard drive (it came with my laptop) was originally

  now I have just an ssd in my laptop but now I got this screen:

  check for the presence of media
  no media present

  After a time: he transforms:

  Restart and select proper boot device or insert boot media in selected boot device and press a key

  I have a bootable usb key but I can't go into the bios boot device set.
  normally I go in the bios when I Press f4 but nothing happens, then I restart the laptop goes into the bios, but it freezes and cannot do anything about it.

  If anyone can help me?

  Thank you

• Start my HP Pavilion dv7 2140ed.

  When I turn on my laptop the num and caps lock flashes constantly. I looked at the explanation of the flashing LED only there that no timetable in the table corresponds. It is that recently that the battery was completed. Anyone know what it is? BTW I have all ready replaced the ram thank you!

  Hello

  Try to remove the WLAN Module and see if the laptop boots up without it connected - the process is detailed on Page 60 of your & Maintenance Guide.

  Kind regards

  DP - K