Windows 7 and 2008 R2 are supported

Similar Questions

• VDDK, Windows 7 and 2008 R2 installation problem or volumes

  With the ESX update we can snapshot Windows 7 and 2008 R2 system but try to mount the volumes snapshoted with VDDK return 24305 - the specified volume is already mounted.

  Is this a known issue? We use VDDK ' VMware-vix-disklib - 1.1.1 - 207031.

  Thank you

  -Ron

  When calling for the information of the OS, it is possible that internal one or several volumes can be mounted. So a call to MountVolume can return with the return code "Volume already mounted. This should not be considered a failure. You can call to remove the volume (and close the disk) when finished.

  Thank you

  Annick

• Have a Windows update and my screens are all screwed up now, Please HELP!

  I am running Vista Home Basic and day before yesterday when I rebooted my computer, a Windows update itself installed. He said he was installing 1 of 1 files. I knew the idea of what the update was for, but when I brought my system to the top of the screen and all open windows, including web screens are all strange and almost hourglass like? I tried to restore my system to three times, tried to adjust resolutions and even settings on my old monitor and nothing works. It also seems that all icons and things are a little bit bigger and I don't see anything on the left and the right of my screen. Can someone help me? The only thing that seems normal is the password screen that appears when I turn on my computer before I get to my home page? Any ideas?

  Hi PVneedshelp,

  Welcome!

  I suggest that you try to system restore to the point before you install the update by using the Windows vista installation disc.
  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:
  1 put the installation disc in the disc drive, and then start the computer.
  2. press a key when you are prompted.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  3. Select a language, a time , and monetaryand a method of keyboard or input and then click Next.
  4. click on repair your computer 
  5. in the dialog box System Recovery Options, click the operating system you want to repair, and then click Next
  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created when the program or the driver has been installed.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  If the previous step fails, then I suggest that you uninstall the display adapter driver that is present on the computer and then install the latest driver for graphic map of the manufacturer's Web site and check if it works very well.

  You must be logged on as administrator to perform these steps.
  How to uninstall a computer device driver.
  1. open the Manager of devices by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the device you want to Update, and then double-click the nameof the device .
  3. click on the tab driver , then click Uninstall and follow the instructions.
  Once the uninstall is complete, restart the computer and then install the driver to view CAD that you downloaded from the website of computer manufacturer.

  Also suggest to run Windows updates and make sure that you install the availability.

  1. open Windows Update by clicking the Start button, all programsand then click Windows Update.
  2. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.
  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My email from aol itself imported into Windows mail and all messages are gone from my aol Inbox how I get back them?

  So I was testing on some things with windows that I hadn't used before and thought I'd give mail windows to try because it combines emails. I didn't know that it would take all of my emails from my Aol account. Emails are in my windows mail inbox but they are very important and I need it in my Aol pronto account. I plan not using windows mail at all because it did not work with my other email provider. Is there any other way, in addition to passing all the emails to get back them on my Aol Inbox? Please help panic here

  Hello

   
  Step 1: To export emails from Windows Mail Inbox, try the following steps.
  1. open Windows Mail.
  2. click on the Tools menu, click on export and click on Messages.
  3. Select Microsoft Windows Mail, and then click Next.
  4. click the Browse button and create a folder to export the emails to the Inbox in any place.
  5. click selected folders and select Inbox and complete the wizard to export the messages to the folder.
   
  Step 2: To import the Windows Mail Inbox emails to AOL Inbox, try the following steps.
  1. connect to the AOL user account.
  2. click on file and click Import and search for the destination folder where the e-mails are exported.
  3. follow the wizard to complete the task.
   
  NOTE: If you find difficulties to import messages from AOL account, please contact the support team of AOL for more support options.
   
  For more information on the export of messages from Windows Mail, visit this link:
  http://support.Microsoft.com/default.aspx/KB/196347?p=1
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• My Security Center cannot see that my Windows Defender and Kaspersky PURE are active, how to fix this?

  Whenever I invoke the turn on now, he fails to get the updates (if the Defender is out of date) or it's up-to-date (because I've updated through the Defender on the interface). Regarding anti-virus, Security Center reports that Kaspersky PURE (obviously running not far from the clock on the toolbar) is / was not found. You can see in the screenshot below. Please note that Kaspersky PURE runs (lower right corner of the image) despite Security Center claiming otherwise.

  Is there something wrong with the part of my Vista operating system or what? How I solved this 'blindness' of the Security Center? Thank you.

  According to this link, you should not use Kaspersky Pure and Windows Defender on the same computer: http://support.kaspersky.com/faq/?qid=208281579

  Try disabling Windows Defender and restart the computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  If the "Security Center" does not always recognize Kaspersky, suggest contact Kaspersky Support or ask for help in the Forum Vista:

  http://answers.Microsoft.com/en-us

  Kind regards...

• I've lost my WINDOWS PHOTOS and now they are relocated in GOOGLE DESKTOP - please help.

  I was in my WINDOWS IMAGES and stick something (I don't know what I press/like I'm not good on computer): but it completely deleted all my PHOTO FILES and now they are relocated in google desktop.  When I press "Open folder" he said Desktop file not found: C:\Users\Jane\Pictures\ISRAEL PHOTOS.  How to restore this back to my WINDOWS PHOTOS (in the form of IMAGES of WINDOWS) is more images inside.  I'm sorry to be so STUPID.  Would you HELP ME because I don't want to lose my photos... and give me a process step by step.  Help, please.  I'm so afraid of losing my precious photos of friends.

  Hi Jane,

  The best thing to get this fixed number is to run the system restore.

  Follow the steps according to the below mentioned link:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Once you launch select System Restore the earlier date when your computer was working fine and then follow once the screen instructions

  Reply back with the results

• Windows 8 and/or Surface Pro supports "connected standby mode?

  Hello

  I just read that ' a Windows 8.1 feature called connected standby mode, which allows computers to be put into mode 'sleep' and wake up instantly, is available today than in the 32-bit version "is the reason why" first Trail Bay tablets will use only the 32-bit version of Windows 8.1 ".»

  But if this is true, don't would then not it means that the Surface Pro running Windows 8 Pro 64 bit is therefore unable to use "connected pending"?

  I didn't notice the Surface Pro or the W700 Acer having problems coming out pending, then perhaps 'connected standby mode' is another type of sleep?  Can someone explain to me.  The "instant on" feature (the case of illusion, or for real) is what tablet users and so Windows 8.

  Our company has been delaying the replacement of our laptops Windows XP until the release of 2.4 GHz, 64 bit, 8 GB RAM, SSD 256/512, 4 G/LTE Mobile Broadband Bay Trail devices come to market.  As a benchmark, we are looking for a device (/ Ultrabook/Tablet laptop computer) that would be able to effectively deliver business applications, for example Adobe Photoshop, MS Powerpoint.  2 to 4 GB of RAM will not be enough.

  It will be Haswell devices without a fan, we have to buy these, even if they are much heavier and have reduced the battery life because it seems that it would not be until 2015 that see us peripheral Bay Trail capable business, see the articles below.

  http://www.TomsHardware.com/news/Atom-Bay-Trail-Valleyview, 19244.html
  Mobile Atom SoC stay 32-bit at least until 2015
  Somewhat surprising is the notion that Intel will keep its Silvermont Atom processor as a 32-bit platform until at least 2014. Customers who need the ability of 64-bit Atom will have to the Centerton Atom-S the microserver-based processor. It is not known if the successor of Silvermont, the 14 nm Airmont, will move to 64-bit

  https://www.NetworkWorld.com/news/2013/091213-Windows-81-tablets-with-64-bit-273770.html

  Buyers looking for a tablet with the new Bay Trail Atom from Intel chip and a 64-bit version of Windows 8.1 will have to wait until early next year.

  Intel executives said Wednesday the first Trail Bay tablets will use only the 32-bit version of Windows 8.1, despite the support of 64-bit on the chip.

  Tablets with OS 32 bit have a limit of 4 GB of DRAM memory, while 64-bit can actually support 512 GB. Most of the first tablets Trail Bay with Windows 8.1 will not more than 4 GB of memory, said Steve Smith, Vice President and Director of development for the tablet at Intel.

  "We have the capacity, now it's a matter of when a system of consumption needs, it's probably somewhere in the future, I would say that a few generations away ', said Smith.

  The reason is the limitation in the software of Microsoft, said Nathan Brookwood, principal analyst at Insight 64. A feature of Windows 8.1 and wake up instantly, called Eve connected, which allows computers to be put into mode 'sleep' is available now than in the 32-bit version.

  Microsoft adds functionality to the 8.1 Windows 64-bit, and it will be available in early 2014.

  Intel also does not feel 64-bit is required on consumer shelves, even if he knows what IT managers want 64-bit compatibility on all PCs and mobile devices in the enterprise.

  Intel is developing a smart Tablet Trail separate Bay scheduled for 64 bit versions of Windows 8.1, and the processor will be available in the first quarter of next year, said Chris Walker, Director general of tablets at Intel Mobile Communications Group.

  2 Surface Pro supports NOT connected to sleep, even if it uses the "Haswell" chip, which supports this mode.

  There is a world of difference between standby connected and traditional modes of 'Sleep' and 'put to sleep '. Basically, connected to standby mode, the system really is, but requests are suspended for most. See here for a Microsoft document that gives an introduction connected mode standby.

  I don't know why the 2 Surface Pro does not deliver sleep connected; I've seen several data, possible reasons for why this might be true:

  • The 64-bit Windows 8/8.1 version does not support it.
  • It is necessary that the material to be a fanless design (Surface Pro 2A fans).
  • It is necessary for the design to have TPM (Trusted Platform Module) version 2.0 (Surface Pro 2A version 1.2)

  Whatever the reason (and it can be one or more of the above), it is disappointing that a product of the so-called phare does not support the feature.

• Why is my disk almost full? & Can remove library, containers and app caches are supported files?

  I emptied my system pretty well on an external, put disc to update my computer and I still have the same use of data showing in disk utility.

  with the help of el capitan.

  I don't know where most of the pictures are like he reads 8 GB but they must be scattered in my application note.

  7.88 GB movies must be in my iTunes music videos, 'others' I don't know actually, that's what I put.

  

  looking at my applications folder that adds another 70 GB.

  

  with regard to my LIBRARY.

  connects to 195 MB

  application support 25 GB

  caches/3 GB

  containers 6.65 GB

  I can delete everything in containers, caches and support applications?

  

  

  

  

  Well, it's your Mac, and you can do whatever you want on it, but if you remove all those who come to know that you will remove a large part of your own data, most - if not all - your apps do not work and you will have a good old mess on your hands.

  OS x: what is 'other' space about this Mac? -Apple Support

• When you access microsoft technical support, I get a message that the article applies to windows vista and head to the support of windows xp. However, I have installed professional vista

  Microsoft support see my installed OS windows XP. When, in fact, I have Vista for businesses. So that when I click on an article I get a message that the article does not apply to me and that I should see windows xp support

  If you don't mind, double check what Windows do you really.

  If you do not have Vista... Start > computer > toolbar, System Properties > what does say under Windows edition?

  t-4-2

• How to identify and remove duplicates and files in Windows 7 and those who are not the files in Win 7

  I used a program called IntelliMover and think that it flies over the files and unnecessary files.  How can I identify and delete these files?

  If make sure you that the files are not used by some programs or windows, then, the answer is YES.
  Easier would be, just look for duplicates in the folders where the files are not required by Windows or programs.

• CP6: Windows PE and the project are not aligned

  Hello

  I noticed that the Table of contents and the project show (940 x 540) windows are not aligned to each other (1st photo), I wonder why my show is displayed below the table of contents and has a top border of the white page. As a result, playback buttons are completely out of the window if I play equipment in the stand-alone flash player. Despite this the other skin with thinner playback buttons would be perfectly, I received instruction to use the largest.

  If I resize the project, the video is placed in the background, but there is a strange space between panels second pic).

  Is there a way to fix this?

  Thank you.

  

  It's the buggy version. A year ago, a patch was released that fixed several bugs. Please update your version, I think in 6.0.1.240 if my memory number is correct.

• Windows Datacenter and 2008 Server Images

  We have just set up a new environment vSphere and bought Windows Datacenter for all of our ESX boxes.  I was not able to get advice from Microsoft regarding how to use this approval.  When I do my Windows Server 2008 image, just use the Windows Datacenter with it?  I am worried about the deployment of a Server Windows 2008 model, and then every time it goes off and sends the key to data center to Microsoft.

  Any contribution is appreciated.

  Connect to your mvls account... you will see 2 sets of keys for each operating system (kms and mak). You must use Maks for each operating system

• Depth or color not supported mode. Only RGB, CMYK, grayscale, and Bitmap levels are supported?

  Hello. I am trying to replace a string in a CMYK image with a spot color in Illustrator CS6 and photoshop CS6. Change the color, it is quite simple and then saving them as a multichannel DSP. But then it will not be re-issued in Illustrator and I just got the above message. I don't understand why it won't link to. I've done this before with images and are they related in fine illustrator. Am I missing a setting or mode of file somewhere?

  Too bad. I thought about it. Went back to previous files I created and realized that I saved as .eps files. For anyone else having this problem... you can't save a multichannel image as a psd, you have to save to an EPS Photoshop DCS 2.0 then it will very well repeat :-)

• When will there be a Service Pack 2 for Windows 7 and 2008 R2?

  Just curious... there at - it news on that front?

  Thank you

  No, not officially, but the convinience rollup package is named as SP2 unofficially because it contains all the post SP1 updates.

  Microsoft releases the package of rolls for windows 7, which contains all the post Service pack 1 updates

• Windows XP and Vista does support Multi processors

  Hello

  Could someone tell me if material motherboards today multiprocessor support Windows XP and the same for Windows Vista?  If yes would someone also indicate which version of Windows XP and Vista no it support and even for 32/64-bit options? I read that you need Windows Vista Ultimate Edition to run on the hardware of today? Is this correct?

  Thanks in advance

  Victor

  If the material is supported on a given operating system is determined by the manufacturer equipment.  If they support a given operating system, then you are good to go.  If they do not, things will be less a lot rougher.

  However, as a general rule, the professional level of the Windows operating systems support multiple processors if that is your only concern.  I hope you understand the difference between multiple processors and multiple cores.  :-)

  Answers to your, "you must have Windows Vista Ultimate Edition to run on the hardware of today?  Is this correct? "query is, 'no, No '.

  For Windows Vista (I want to jump, if I thought to upgrade):
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/multi-core-processor-and-multiprocessor-limit-for/d00780f8-76e8-4AF6-AA49-e64a7007c17f

  In regard to the 64-bit or 32 - bit - still once it comes down to the support of manufacturer of material for a given operating system * and * the said OS architecture.

  It of for homework, isn't it?