Windows 7 does not detect the additional disks in the selection of drive during the instalation

Similar Questions

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Windows Update does not detect the sp1.

  Hi all.

  I do update windows via the control panel and its been so many updates, but it does not detect any service packs.
  Anyone know what I can do to solve the problem?

  My computer is a compaq presario with vista home premium.

  Thank you.

  Hello

  Download SP1 or SP2 from the links below:

  Vista SP1:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Vista SP2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  And then perform a clean boot and disable the antivirus, and then restart the computer.
  Clean boot:
  http://support.Microsoft.com/kb/929135

  Install the service pack, and then restart the computer.

  Problem of Windows updates should get fixed after you install the service packs.

  All the best!

• XP Mode in Windows 7 does not detect the ATI Radeon graphics card

  Hi, on windows 7, xp (virtual), the system mode does not detect my graphics (ATI Radeon HD4530). This card is indispensable to run a business application (multimedia program). Can you please help me.

  Thank you, Christian.

  * original XP mode with title - __Windows 7 - (virtual) with ATI radeon HD4530__Christian.* graphics card

  Windows XP mode provides a virtual hardware platform to run XP programs.  With the exception of some USB devices, it does not provide a direct access to the hardware on the host computer.

  If you need to use your real graphics hardware in XP you will probably have to put in place a system to dual-boot and boot XP when necessary.

• Windows Vista does not detect the printer

  had the printer works fine until Windows vista did an update. Now hp poster printer not detected

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Windows 7 does not detect the GPS Garmin device.

  Original title: the hardware detection.

  I recently bought a Garmin GPS.  I can not get my PC running windows 7 to detect it.  Fortunately, I still have my old machine with XP and it recognizes.  How can I get my new machine to detect.  I down loaded new drivers from Garmin website, but nothing helped.  My old machine ran to 64-bit the more recent short 128 bit if it's any help

  My Magellan 5236 T wouldn't connect to Win 7 Premium. Began to look for someone with XP. Duhh!
  And that's this worked on my Compaq Mini Win 7 Starter Edition (in french!).
  Go figure. There are 32 bit vs 64.  It may be useful

• HP Photosmart 5520 does not detect the installed cartridges

  Hello world

  My operating system is Windows Vista

  The error message for all cartridges installed even when installation and matching color on the printer, it is "the following cartridges appear to be missing.

  This is a new printer and I never got past this stage on this printer.

  Thanks in advance

  Craig Baker

  Hello Craig,.
  
  
  
  I noticed your message on the error message you see on your Photosmart 5520. I'm not sure if you have solved your problem yet, otherwise, I would like to post a link below for you to solve this problem.
  
  
  
  If you are still having the same problem when you have completed the steps, I recommend you call HP Technical Support to inquire about a replacement printer.
  
  
  
  
  
  http://support.HP.com/us-en/document/c03262515
  
  
  
  
  
  Contact information for HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  
  
  
  
  Good luck

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Windows 7 does not detect multiple external hard drives

  I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

  If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

  The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• The Digital Persona does not detect the fingerprint reader in Windows 7

  I have upgraded from Vista to Windows 7 Pro (full installation). Now, DigitalPersona does not detect the fingerprint reader. I tried to uninstall and reinstall the driver and the program, does not. Any ideas?

  Hi Cankermechanic,

  I suggest that you try to update the drivers supplied by Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  If the problem persists, I would recommend that you uninstall drivers and reinstall the drivers from the site Web of Digital Persona, if that is helpful.

  If the problem persists, I suggest that visit you the manufacturer for further assistance from the link below:
  http://www.askpersona.com/

  I also recommend that you contact the manufacturer of the computer for further assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Oracle 11 g R2 grid does not detect the ASM disks

  Hi guys,.

  I'm trying to install Oracle 11 g R2 RAC and as part of the installation of the grid, the Setup program does not detect the ASM disks.

  Here are the outputs for some commands.

  [root@rac1 ~] # oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  Instantiation of disk 'ASMDATA2 '.

  Instantiation of disk 'ASMDATA1 '.

  [root@rac1 ~] # oracleasm listdisks

  ASMDATA1

  ASMDATA2

  [root@rac1 ~] # ls - ls/dev/oracleasm/disks

  Total 0

  0 brw - rw - 1 grid asmadmin 252, 3 14 May 17:18 ASMDATA1

  0 brw - rw - 1 grid asmadmin 252, 2 14 May 17:18 ASMDATA2

  I already tried to reconfigure Oracleasm (oracleasm configure - i) but no luck.

  I would be really grateful for the help here as its been a few days now and want to complete the installation as soon as possible

  Concerning

  Praveen

  Thank you Ricardo, I see now the disks after you change the path from discovery to/dev/oracleasm/disks

  

• Windows 7 does not detect not USB flash drive

  Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

  Assuming that you have several disks that work on other computers...

  If you have tried several USB drives on the same port

  AND

  This port does not recognize the USB device plugged in, while the port is not operational.

  IF

  All ports respond in the same way

  THEN

  You don't have either not installed the correct drivers

  OR they did not physically.

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby