Windows 7 does not see its PCIe card, in that I put

Similar Questions

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Windows 7 does not see my Ultrabook XPS14 SSD

  Hello

  My work has receievd 3 Dell XPS 14 Windows 8. Not wanting to release Windows 8 on my users yet... I wanted to downgrade to Windows 7... shot in a disc of Windows 7 SP1 OEM. On the Windows installation and select custom (advanced option) set up does not see my drive. I can't load the drivers because it did not come with any, and on the dell site Web has not listed.

  any help is appreciated!

  Thank you

  Hi Craigomac1,

  This laptop has an option to UEFI boot or legacy. Try to change the setting.

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• After the awakening of system does not see the sound card

  Hello

  I have a problem with the Hibernate. After the wake-up system do not see my card (creative sound N2 on USB key). I've been in touch with Creative and I know that I need to uninstall my laptop Realtek sound card in BIOS. Of course, I don't see any possibility in the BIOS. In Windows XP Home edition, can I uninstall this sound card, but after reboot this card is itself back installation.

  And I want to know how to completely disable Realtek.

  Hi Tomasz

  One question;
  You're talking about on a map of external sound that is connected via USB to the laptop or talk on the Realtek integrated sound card!

  I know a similar sound problem on Vista OS.
  I read in the knowledge base Microsoft on similar problems;

  Please check this:
  http://support.Microsoft.com/kb/929685/en-us

  Please provide more details if this fix will not help you!

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 does not recognize the sd card

  Well this morning I wanted to add a file to my SDCard which is used for my wii.  When I plugged in on the sd card, nothing happened.  No noise, no windows pop up, nothing.  So I went to my computer and one c, d and e drives where it.  Went to the Manager of peripherals and nothing there either.  This card is a scandisk 4 GB sdhc.  my laptop is old about 3 weeks, just like this sd card (bought both on a Black Friday special;).   I used this card a few days ago on this computer without any problem at all.  The computer does not have a sd slot, so I have to use a usb card reader.  I can't find a brand name on the player.  I was however able to get my old sd card wii to read on this computer with the sd card reader, so I know that the card reader works.  I also tried an old usb 2.0 all in a player and had the same results, my new 4 GB sdhc card will not load, but the old card 1 GB sd (it is not sdhc) had no problem.  This sdhc 4 GB card reads perfectly into the wii.  I pulled out my old laptop which has vista sp2 on it and used the card readers and had no problem loading the new 4 GB sd card.  So, by doing that, I think I have excluded the possibility of having a bad card sd and poor readers.  I have no other sd sdhc card, so I don't know that's what is causing the problem.  Like I said before less than a week, there, everything was fine, and the new computer was able to read the 4 GB card.  Were there an update of windows 7, which would have affected this in the last days?  My computer is set up to receive and install all the new windows updates.  I uninstalled all the usb on this computer drivers and reinstalled them.  I did the same thing with usb card reader drivers.  If anyone has any ideas on how to solve this problem, it would be great thanks.

  I was unable to read an 8 GB SDHC, formatted and used for a camera Olympus E - PL1. The card would not be read either on my desktop with Windows 7 using an older SD USB card reader or a 1-year-old Thinkpad W500 with built in SD slot using XP. It was to «put the disc in drive x...» "and act like there is no card in there. After researching on the web, it seemed that it might be a hardware problem. After buying a new USB card reader whichspecifically says that it supports SDHC , the problem is solved on two computers. Apparently, the new SD HC versions seem to need some electronic more or something to decode the higher formats.

  Bought card reader has an Interior "Pro all-in-one USB Card Reader/write" stock # 08308 to Fry for $7.99. Now, without any updated driver 8 GB SD card files are now visible on computers through the USB drive and works like any USB key.

  There are many other brands in the store, but the point is to buy one that appoints SDHC as supported. This hinterland supports SD, SDHC, MMC, Memory Stick, Memory Stick Pro, and so on.

• Research of start Windows 7 does not see outlook and onenote items

  I use office 2010 and windows 7 Enterprise.    When you used to search in the start bar the results it would display would contain items outlook and onenote but it is no longer made.  It contains only the elements with the words to search for in the name of the file.

  If however I chose see more results while all outlook and onenote items are there.  It feels like a framework or something somewhere has changed and now the start bar search does not bother to look in the index.
  I made sure that all the search options in the start bar properties tab are on and working, but still no results.
  Anyone got any ideas?

  Hello

  Work on a domain environment?

  You can try the following methods and check if it solves the problem:

  Method 1:

  You can run the fixit from the following link and check if it makes a difference:

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/en-us

  Method 2:

  Try the steps from the following link and check:

  The box "search programs and files" does not correctly display the search results in Windows 7 and Windows 2008 R2

  http://support.Microsoft.com/kb/977380

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  You can also view the following link to see if it works:

  Searching in Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/searching-in-Windows-frequently-asked-questions

  Let us know if it helps!

• Windows Vista does not see my Canon G12 digital camera

  I tried to upload photos today of my Canon G11 digital camera and has encountered a problem.
  I used this camera and other cameras on this computer before and had no problem connecting to the cameras.  Today, I'm having a problem.
  (1) I plug in the camera and a small window at the bottom right of my screen jumps to the top of the poster "install device driver".
  "(2)"new hardware found"window that reads,".
  Windows needs to install driver software for Canon digital camera»
  There are three choices:

  • Locate and install driver software
  • Ask me later
  • Do not show the message for this device

  (3) I click "locate and install driver software" and I get a updated driver software - error of digital Canon camera that reads, "Windows has encountered a problem installing the software driver for your device."  Windows found driver software for your device but encountered an error trying to install it.
  Digital camera
  An error occurred during the installation of the device:
  Cannot install the driver because he is only not digitally signed properly.  Contact your hardware vendor. »

  I tried to reboot several times, and I tried to uninstall the device from Device Manager and reinstall the device. None of these worked.  |

  AFAIK there are no drivers for this device on the Canon website.  How can I get my Windows Vista computer to recognize my Canon G11 camera?

  Thank you
  John

  a screen pops up announcing that a new device has been detected.

  The drivers for this device are not installed. (Code 28)
  To reinstall the drivers for this device, click on reinstall.

  Yes there is no drivers for the device. The software supplied with the camera must be installed. The camera window should open when the camera is connected to the computer. Try using another USB port or use another cable, it can go bad too.

  In the Device Manager expand Universal Serial Bus controllers, search for the connected camera or something as a mass storage device. Right click above and uninstall, then restart, it needs to be reinstalled. If does not uninstall everything under USB controllers and then restart your computer.

• Windows 7 does not recognize the SD card in the Device Manager

  That pretty much sums up it. I can't understand. my SD card is not launched in 'my computer', but my device manager recognizes it, and little noise "da dup" turns on when I put the SD card in and out. Please help me, I have pictures of my studies that I need it. Anyone else having the same problem? the same answer? Thank you!

  * original title - Windows 7 not recognizing my SD card, even if my computer sees it in Device Manager. How can I get my computer to show my SDCard under 'My Computer'? *

  I had the same problem today. I have, but I fixed it by removing and then reinstalling the driver for the USB 2.0 card reader. He said that the data has been corrupted. so I reinstalled it.