Windows 7 hangs at the installation screen now

Similar Questions

• Windows XP hangs at the splash screen (logo). Dim screen when hooked.

  I do have problems starting XP 2 on two different hard drives.  I'm more concerned at this time is described in the title.  I bought a new hard drive (Western Digital Caviar Blue WD3200AAKS 320) to back up the data on my old hard drive, due to the other XP startup problem and installed Windows XP Home edition, as well as my motherboard drivers, etc..  It starts very well, at first, but then started a curtain to the start screen (and the splash screen is very low in this case).  I tried to remove some additional applications provided with the motherboard, no luck.  I tried to reinstall XP several times, and who has not helped.  I tried to update my video driver, running chkdsk, running Windows Memory Diagnostic (which does no problem), cleaning the registry with Advanced System Care Pro, unplug all USB devices and network cable, etc.  He continues to hang at the splash screen (weakly).  When I try to start in safe mode, it hangs at "mup.sys.  So far, I'm able to get XP to start by repeated restart later...  I searched the web to find a solution for this and have found no definitive answer.  I just ordered another new hard drive and Windows 7.  I intend to dual boot with windows 7 the new HD and XP on the current disc (assuming that this problem can be solved!).

  My other problem is on my old sister Hitachi 160 GB IDE hard drive.  A few months, our PC stop working.  After buying a new power supply (Corsair TX650w) and determine that he was not a power supply problem, I bought a new motherboard (GA-MA785GT-UD3H), (AMD Phenom II X 2 555 3.2 Ghz) CPU, RAM (CORSAIR XMS3 DHX 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333), and some new fans (old system died due to heat issues).  Once I had it put in place and I tried to boot XP from my old drive, he just went in a "boot loop".  He gets to the XP splash screen, goes black and restarts, again and again.  I tried setting the installation of XP with XP CD 3 or 4 times, without success.  This question is not as big of a deal to me now, because I now have the new hard drive with the new number to start XP (intermittent).  My main goal with the old hard drive was to save all my data.  That is, life turns on if I can't start XP on this drive (the one with the boot loop).

  Thank you for your time!

  The BIOS update has * seems * solved the problem!  I rebooted it 4 or 5 times, but also completely off the PC and it starts today.  Did not repeat the problem so far!

  It is a great place to come to answer my own questions!  Bookmark!

• Windows Vista hangs at the Welcome screen. Can anyone help?

  From early December 2009, my Dell Inspiron E1505 said hung up on the 'Welcome' screen, leaving me stuck and cannot use the computer. It would do this every time I tried to start it. Since that time I switch Safe Mode and using the restore system to get it going again. Sometimes, I have to use restore the system several times to allow to start correctly. More recently, I learned that when it hangs at the Welcome screen, I can press "Ctrl-alt-del" and then my computer will load up the icons after about 10 seconds and then it is ready to go.

  I finally started to 'Sleep' mode, and then it starts right up when I want to use it. The problem is that he sometimes stops for updates, or crash if I overload it somehow, and then it's a big problem, it'll still do. ... Well, now I can turn it on by pressing the "Ctrl-alt-del' when it clings to the host, but I don't feel comfortable making. I'm afraid that it will eventually mess worse.

  I have not installed any new software or downloaded anything by email, with the exception, so I don't know what caused this problem. I have the feeling that something has been altered during the automatic update of windows.

  Can someone please help me understand what caused this problem and what to do to fix? I need a walkthrough very detailed, as I am not a computer technician. My experience with computers is very limited, but I do not know a few basics such as obtaining safe mode, etc. My warranty with Dell has long expired. My computer is 3 years old. With the exception of this problem Windows Vista worked great shape. I liked Windows XP much better, but Vista was 'correct' that day until this problem came.

  Thank you: Jean

  Hello

  Given that the system restore works sort the problem is likely corruption at a certain level.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  If necessary try a stronger set of controls:

  From the COMMAND prompt from a floppy boot or the Recovery Console/environment (if you have) run these:

  Chkdsk /f /r

  RESET

  sfc/scannow

  RESET

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  And if necessary check here:

  Manufacturer diagnostic utilities - run for the manufacturer of your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  Trial versions of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• Applications Windows 8 not opening not and windows store hangs on the splash screen

  Basically, none of the applications opens and when I click on the store it will open the screen green spash and then crash.

  I used the troubleshooter of app windows 8, which he says he has solved the problem and asks me to restart, which I do and the apps don't always work.
  I deleted all my recent programs, but this has not fixed it.
  I have now uninstalled my antivirus and firewall, but they still do not work
  Could someone help me solve this problem?
  Thank you

  Hi Tom,

  Thanks for posting your question on the Forums of community of Microsoft.

  I understand from the description of the issue, that the store Windows and applications do not work on your computer Windows 8.

  1. do you receive an error message when you try to launch applications?
  2. is it works much earlier?
  3. using a proxy connection?

  Here are a few methods, we can try that these measures could help set the question of the application.

  Method 1: Please change the resolution and check if that helps.

  a. press Windows + x, click or tap command prompt (Administrator).
  b. navigate to the command prompt, type desk.cpl.
  c. Please change the resolution of the screen 1366 * 768.

  Method 2:

  
  Since you aren't able to access the Windows store I suggest you turn off the proxy connection, and check again.

  a. click the gear box in the upper right corner in internet explore.
  b. click on tools and then click Internet Options.
  c. click on the Connections tab, then click LAN settings.
  d. Select the use a proxy server for your LAN check box.
  e. in the address box, type the address of the proxy server.
  f. in the Port box, type the port number.

  Method 3:
  

  I suggest you to reset the cache to store and check if you are able to open the store.

  To do:
  a. press the Windows key + R
  b. Type wsreset.exe and press to enter.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• ESXi 4.1 install hangs at the installation screen

  I'm running a white box (Yes, I know) built a tyan s5380 and intel 2 5430 s. Have tried various bios without success, including a reset settings to default values (and then only allowing virtualization of intel).  Especially I was wondering if someone else has installed ESXi on this Board sucessfully, or if I'm wasting my time.

  The question that you see is very probably due to ACPI incompatibility where the Setup program does not recognize the keyboard properly. If you have a keyboard USB, unplug / plug it at this stage. This usually allows.

  André

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• When I restart Windows 7 home premium, the computer hangs on the bios screen.

  I don't know what exactly when this problem started, but I can stop the machine and it will start normally.  If upodates are installed and the machine restart it hangs at the bios screen all the time.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8, stuck on the boot screen

  A few months ago, I bought a new computer with Windows 8 is installed.  He is now in a State where it lights up and freeze on the screen of the tile, I can't click on buttons or even open the search.  She used to freeze while I was using it and restarting would solve the problem, now, who will no longer work.

  What can I do to fix this?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I understand that Windows 8 computer hangs at the splash screen.

  Before you continue with the troubleshooting steps, please answer the following questions below.

  (1) what is the brand and model of the computer?

  (2) have you made changes on the computer recently?

  (3) what security software is installed on the computer?

  I suggest you follow the methods below and check if the problem persists.

  Method 1: Perform a restore of the system using the DVD in Windows 8.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: You may be prompted to insert disks or recovery media supplied with your PC. Check the information that came with your PC to see if the manufacturer of your PC provided these discs or media. In some cases, you may set their when you set up your PC.

  Method 2: Refer to the link below and follow the instructions.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3: Please refer to the article below and follow the instructions.

  Improve performance by optimizing your hard drive

  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also section below.

  Ways to improve the performance of your PC

  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• age of conquerors hangs at the loading screen

  Running windows xp sp 3, the age of the conquerors hangs at the loading screen. I tried all the suggestions in the article and had no success. Age of Mythology Gold edition also fails to load beyond the cinematics (black screen)

  Running direct x9.c

  Other games work fine, just the age of Kings / age of Conq and Age of Mythology - crazy thing is the origin of the Age of Empires loads and runs.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  It is possible that a third-party application is causing the conflict.
  You are required to perform a clean boot to find the program that is causing this conflict and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Method 2.
  Also I recommend you to update the card drivers video from the manufacturer's website and check.
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.

  I hope this helps.

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Windows could not complete the installation - Message in Vista 32

  Windows could not complete the installation. To install windows on this computer, run the Setup again.

  I get this message when I switch on my compaq CQ40 with Vista 32. From this screen, I can go into Manager tasks and go online, see the program files on the C: drive, change passwords, etc. Anything except support Vista. I just downloaded and installed SP2 via the Task Manager. Always stops after the Welcome screen. Another thing I never noticed before: during the boot and just after opening orb, the Welcome to Windows message lights up with the small circle of progress, then I hear a sound of gong just before startup fails. Curious. Any help out there?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• Debug build hangs at the splash screen after Update Beta 4

  Since the update of the fall of November, debug builds Dev Alpha hang at the splash screen.

  By release notes, on the basis of known issues:

  "AIR debugger cannot display the IP host dialog box when a debugging session is initiated. This can cause applications to hang at the splash screen and fail to launch. (240219, 242986) »

  A workaround solution is given for people running Flash Builder, where you explicitly give the Debug IP address host instead

  in relying on the auto-discovery.  I use the command line flow (don't have Flash Builder), and my debug builds that were operating out of now drop from September to the start screen. -DebugHost 169.254.0.2, I added to my blackberry-airpackager command and the debug builds always hang.  Release builds signed with my symbolic debugging normally launch, as they did before the update to the decline in November.

  For people who use Flash Builder and who know how to look under the hood and find the blackberry-airpackager command that distributes when you do a debug version: to debug this launch is built successfully

  on a Dev Alpha with the November update, can you please put the blackberry-airpackager command line which

  Flash Builder is running?

  Got a reply from them and they confirmed that the dialogue will be back. Let's make it a part of our test cases in the future.

  See you soon,.

  Dustin

• Unfortunately I couldn't find another option in Firefox to describe the problem. I use Windows 7. Since the Firefox update (now I use 16.0.2) when I

  Unfortunately I couldn't find another option in Firefox to describe the problem.
  I use Windows 7.
  Since the Firefox update (now I use 16.0.2) when I use the Google Translator in Firefox, I can't copy and paste into Microsoft Word.
  But when I use it in Internet Explorer, I can't use the copy paste it to Microsoft word (MS Word 2010).
  my e-mail address: [email protected]

  Hello
  Thank you very much for quick help
  It's work with the instruction of Ctrl + C.
  perditer