Windows 7 Non - PnP device

Similar Questions

• Resolution of Windows Server R2 2012 stuck at 1024 x 768 generic Non - PnP

  Hello

  I want to have my own windows home server, so I installed WindowsServer 2012 R2 on a laptop Aspire 7740. But the laptop does not screen because I don't need, I want to order the server remotely via VNC. The problem I have with the server, it's that I can't increase the resolution, so if I use VNC only 1/4 of my remote screen is filled with the desktop of the server due to the fact that my remote screen resolution 1920 x 1080.

  Is it possible to increase the resolution of a generic Non - PnP monitor? (I tried to install the drivers from w8.1 but it did not work)

  Greetings

  healing

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Windows 7 'generic non - pnp monitor '.

  I installed the drivers from nvidia windows 7 (190,62) and it works fine, except that I can't change my resolution to 1680 x 1050 for my 22 inch LCD V7 R22W02 display! It presents itself as 'Generic Non - PnP Monitor'. When I update the drivers, it says that the Non - pnp drivers are up-to-date. The maximum I can choose is 1600 x 1200 which makes all crushed. My monitor is plug'nplay (!) and I can not launch the drivers from the site Web V7 because they are 32-bit.

  I had this problem until I fixed it.

  Problem: the resolution of my screen changed all of a sudden, the screen was LCD ACER monitor..., but it changed for non-Plug-and-Play monitor generic.

  Solution: what I did unplug the power cable that is connected to the monitor when the PC was on.  Then I plugged it to the screen after a few seconds.  I was so happy that my screen resolution was all perfect again! Haha! Simple =)

  I hope this works for anyone having this problem too.

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• Windows 7 detection as a generic non - PnP monitor, cannot set 16:10 resolutions.

  After the reboot, I noticed my resolution has been reset and when I went to go put my Native resolution. I discovered that it wasn't on the list more, and that it has detected it as a 'generic Non - PnP monitor '. Updated video card, CCC, he admits to 1680 x 1050 60 Hz max resolution.

  Video card is an ATI Radeon HD 5750, Monitor is a 20.1 "Soyo MT - NI - DYLM2086 DVI.

  Drivers Vista will also work.

• Monitor the changes between the PNP and non - PNP

  Hi, I'm completely stumped on this problem. I got my new PC for about a month, and during the last two weeks, I knew the Windows device disconnect sound, maybe once or twice every 30 minutes. I didn't mind at first, but now it becomes incredibly annoying. After trying to diagnose the problem, I discovered that it was a problem with my monitor. I use a VGA connection (this is the only method available right now, and I noticed in Device Manager, whenever I hear the sound of the disconnection, the driver for the monitor goes from the PNP to the non - PNP and vice versa. I have no idea why it does this, or how remedy. Any suggestions?

  Hello Adam,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  The monitor display anything after hearing disconnect sound?

  I suggest you to uninstall and reinstall display drivers and check the issue. Please use following steps:

  a. identify the type of adapter installed on your computer. Click the Windows 'Start' menu. Click on "Control Panel" and "system and security." Click on "Device Manager" click on 'show cards '. Your name and brand of your video card will be displayed.

  b. click on 'control panel '. Click on "Uninstall programs" under "programs". Scroll down the list until you find your video card driver; the pilot may not have your exact model in the name of the program, but it will show the manufacturer. For example, if you have an ATI graphics card, the driver would be "ATI Catalyst Control Center".

  c. Select the video card driver, and then click "Uninstall". Follow the step by step instructions, which includes generally confirm that you want to uninstall the driver and clicking on 'Next' to continue through the uninstall process. Click 'Finish', when the driver is uninstalled.

  d. navigate back to the "display manager". Click on 'show cards '. Right-click your video card. Click on "Update driver software." Click on "Search for automatically update driver." Windows will start searching online updated for your graphics card drivers. Available updates will be automatically downloaded and installed. When the driver is installed correctly and may ask you to restart your computer, Windows will notify you.

  e. visit the graphics card manufacturer's Web site. If Windows cannot find the selected driver, you will need to manually download it from the manufacturer. All the drivers are located on the "Drivers" of the Web site of the manufacturer part.

  You can also use the suggestions in this article and check if it helps.

  Reference:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• My computer Windows 10 acknowledges IOS devices. ITunes will not.

  My computer Windows 10 acknowledges IOS devices. ITunes will not. I tried to start and stop the service. I uninstalled I Tunes and reinstalled. I tried different cables and USB ports. Always I Tunes none of mu IOS devices recognizing. It worked fine 2 days ago?

  Make sure you run the latest version of iTunes available at itunes.com/download

  The current version is 12.5.1

• DisplayPort to DVI adapter is generic Non - PNP monitor

  I have a 6 week old want H8 - 1420 T C1U69AV #ABA, Windows 8 64 bit, 1 GB Radeon HD7670 and I am trying to connect two Dell 1905FP monitors. Each monitor works fine when it is connected to the DVI port. When I connect a monitor with an adapter HP DisplayPort / DVI dongle, the system reports it as a generic Non - PNP monitor and the screen remains black. I tried the adapter on another system, and it works fine.

  I've updated to the new '8.982.10.1800 Rev A January 3, 2013' driver on the HP site, but it did not help. The AMD drivers will not install because it is apparently a video of the ugly step-child card, not a true AMD. If I knew that I would have not purchased with the system.

  I have the original of the 1905FP CD when I bought it and it isn't a driver file on this subject (no need of one with XP). When the monitors work, they are each reported as a 1905FP.

  Someone at - it suggestions?

  Thanks for the suggestion, but this has been resolved over the weekend. I was using a passive adapter Displayport to DVI. I replaced it with a Startech DP2DVIS active adapter Displayport to DVI and that did the trick.

• Generic Non - Pnp Moniter Fix?

  Today I turned on my computer and the resolution is really too big, I went to the resolution of the screen and discovered that the resolution, it was fixed to the Max. So I searched the Internet for a few hours and found a way to get back to the original resolution. But now my monitor will not register and not displayed as generic Non - Pnp monitor. Ive updated all possible drivers and still nothing. I tried to unplug my monitor and the computer for a few minutes, but nothing.
  Monitor: Dell ST2320L
  Computer: Inspiron 580
  6 GB of Ram 64 bit
  Intel Core i3 550 @3. 20 ghz, 3.20 ghz

  Open Device Manager > monitors. Open the generic monitor and click the driver for the update. Choose 'Browse my computer for driver software', her choose "Let me pick from a list...". "Uncheck the"Show compatible hardware"and scroll to Dell Computer Corp. look in the right column of your monitor, and I hope that it is listed.

  SC Tom

• problem with the drivers for the card microsoft virtual wifi miniport... problems with PnP devices

  He said to reinstall the drivers for this problem, but they don't reinstall... also he says hardware changes have been detected... can someone explain in easy to understand words what the problem is and how to fix it... pleaseeeeee... Thank you... The convenience store said: THERE IS A PROBLEM WITH THE DRIVER of MICROSOFT VIRTUAL WIFI MINIPORT ADAPTER... DRIVERS MUST BE REINSTALLED... it won't reinstall... also: PROBLEM WITH PnP DEVICES HARDWARE CHANGES HAVE BEEN DETECTED? CAN SOMEONE HELP ME UNDERSTAND, IN EASY WORDS, EXACTLY WHAT I NEED TO DO TO FIX THIS... CD-ROM... IM USING A SAMSUNG LAPTOP MODEL NPR 519 RUNNING WINDOWS 7... Thank you... Update on the microsoft Web site says: this DEVICE no IS NOT WORKING PROPERLY BECAUSE WINDOWS cannot LOAD THE DRIVERS REQUIRED for THIS DEVICE (code 31)... im not computer savvy please someone help

  Hi MAGIC,

  It seems that you may need to update your BIOS firmware.

  You may need to contact Samsung for more information, if the update is available for download on their Web site.

  When started this issue is happening?

  You can disable the virtual WiFi adapter, as it essentially works as a tool of development at the moment:

  http://msdn.Microsoft.com/en-us/library/dd815243%28VS.85%29.aspx

  What is the device that has the problem?

  Reinstall the drivers to fix the problem?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor undetected, only non - PNP monitor used

  I have been using Windows 7 and an external monitor, an Acer AL2216W, for several weeks.  The wreck of monitor to 1680 x 1050 was used.  I rebooted and now 1680 x 1050 is no longer a choice.  When I use the widget of the resolution of the screen, it lists the monitor as generic non - PnP Monitor.  I have a choice of different resolutions, that which some only displayed.  I chose to use 1600 x 1200, but the fonts are blurry and 1680 x 1050, the characters are crunchy.  I tried to install the driver for the Acer AL2216W monitor, but windows tells me that she loves her current driver more and it won't install it.  Do you know what I could try to have this monitor correctly detected?

  Thank you!

  This is resolved.  The monitor must be disconnected, turned off and then reconnected.  Having done this, the monitor is again detected by all computers.

  Thank you

• Computer unable to detect USB devices. Problem with the PnP device

  Hey,.

  When I use any usb device in my computer it didn't show. When I troubleshoting the messege see the problam pnp device. kindly advice me how to solve this problam in my system.

  Thank you.

  Original title: pnp device problam

  Hello Usman,

  Thanks for posting your query in Microsoft Community Forum.

  1. It was working fine before? If Yes, you did it any significant hardware or change software on the computer before this problem?
  2. What is the exact error message you get, when you say, 'messege see device pnp problam?

  I understand that you can not use your USB devices because your system does not detect them. To resolve this problem, I would suggest trying the following methods and check if the number is reproduced.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problem with the PnP device

  Problem when I connect to my camera Canon SD870IS.  Has started to occur after Windows has been reinstalled, using the disc had been slipstreamed with SP1.  Convenience store (Start-> devices) and printers-> right click and select Troubleshot reports there is a problem with the PnP device and suggest to reinstall the driver. Reinstall driver fixed the problem, but he returns as soon as the computer is restarted.  How can I permanently solve the problem?  Environment:
  Dell Inspiron 530
  2 GB memory
  latest drivers for system devices (drivers have been updated since the problem began, that does not solve the problem)
  latest drivers for the camera
  Windows 7 Ultimate 32 bit

  I carefully reread the manual of the camera, which proposed the transfer of the camera rather than the computer.  After doing this once, the problem has been resolved.  Apparently, initiating the camera change some settings on the computer.  It shows now no error when the camera is connected, and the file transfer Wizard starts automatically.

  Problem can be closed.

• «Problem with PnP devices»

  The CD/DVD drive does not read disks that are inserted into my laptop. I have troubleshooted and scanned for viruses, and nothing is forthcoming. I have also tried uninstalling my reader cd rom and re install and the same thing happens every time, "The problem with the PnP devices" how solve this problem so I can watch DVDs or listen to CDs on my laptop?

  Hello

  1. What is the brand and model of your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  See the link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116/en-us

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Please let us know if you need more assistance. We will be happy to help you.

• Windows has stopped this device (USB 2.0 Flash Disk) because it has reported problems. (Code 43)

  I have USB 2.0 Flash Disk of Orchid do. This device worked perfectly until I downloaded from MS Download Center "Microsoft USB Flash Drive Manager" and tried to install this. Although the program has not installed message stating that "this program is not applicable for the Version of Windows installed on your computer", but it made my flash drive stop working after the installation fails. Now, I always get error message this device driver was not successfully installed (USB device not recognized) and your USB device has malfunctioned or Windows has stopped this device because it has reported problems (Code 43). In the Device Manager under USB controllers, the device is listed as "unknown device". I tried most of the methods described in the forum, but so far none of them has proved to be successful. I will ask members of the forum of good want to let me know if my device itself has developed some defect (hardware failure) or is - having something to do with driver has been corrupted (software compatibility problem) and if so what is the corrective treatment / necessary rectification. Furthermore, I must say here that I am running Windows 7 RC OS version on my computer. Thank you best regards &.

  Hi ALOK CHANDRA SINGH,.
  If none of these solutions will not help you check this thread.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.