Windows Server 2008 firewall problem

Similar Questions

• Windows Server 2008 R2 problem

  Hello

  I am a newbie to Flash media server and I want to study its use.

  Does anyone have experience with Flash Media Server 3.5.3 running on Windows Server 2008 R2? I installed FMS on my Windows Server 2008 R2, but cannot start the administration console.

  Furthermore, I installed FMS on a 32-bit Windows Server 2003 computer. And I am able to use the administration console on the 2003 server to connect to the Server 2008 R2 installation.

  Also, I have a full disc that is used to contain the content of the media streaming via FMS. How can I configure FMS using this drive as root for multimedia file instead of using "c:\program files (x86)\...\webroot\vod.

  Thanks a lot for helping me start the project.

  Best regards

  Steve Yau

  1 as you say rightly first of all it is not question FMS as you can connect to the server administration through another machine. So probably his Win 2008 or IE or some Flash question - don't have much idea about it.

  2. you can use VideoPlayer.html present in samples C\Program Files (x 86) folder \Flash Media Server 3.5\samples\videoPlayer. "Put the URL correct example" rtmp://myIPAddress/vod/myfile.flv (where myfile.flv is placed in D:\myMediaFiles)

  Try and let me know.

• Windows Server 2008 windows Firewall is not running and service are not not in services.msc, how do I solve this problem

  as I have found our service of windows windows Server 2008 firewall does not and I checked services.msc and I couldnot find service of windows firewall in the list of services at all. Windows firewall & advance sercurity give error 0x6D9 code. Please let me know how to solve this problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• D20 problem of configuration of Windows Server 2008 R2 / 1 x SATA HD / 4 x SATA SSD

  Hi all

  I have a Mod D20. 4155 and want to use next to it is by default SATA HDD SATA SSD four disks of virtual machines. Windows Server 2008 R2 will be the OS with the use of its Hyper-V features.

  I have Aproblem with detection of drives in the configuration of the operating system. All 5 disks are visible in the Marvell controller BIOS setup. It is possible to configure a RAID on the SSD, etc, but I don't "see" any disk in the configuration of the operating system. I tried to load additional drivers in the part of the Setup utility GUI, but it did not work. I tried with the driver Marcell SAS and Intel Matrix driver, both located at http://www-307.ibm.com/pc/support/site.wss/migr-72280.html.

  Suggestions for the BIOS of the PC / BIOS Marvell / OS installation configurations?

  Best regards, Chrischmi

  Hi all

  I found the solution myself. After detection, the default drive is a SATA drive (and), I got the idea to test it on the Intel SATA controller. It was possible to install the spirit of the machine the disks attached to the Intel controller. After installation, I went to Device Manager and installed the driver of Lenovo Marvell, rekindled the Marvell controller disk and started the. Successfully. Yes!

  On my way to the solution, I had another problem: in the setup of Windows GUI part, I got an error of 0 x 80300001 with Lenovo's Intel SATA driver. It was not possible to install windows Server on the SATA drive with reason0x80300001. very helpful post, Microsoft! (-) I decided to use the default Microsoft for the Intel SATA controller driver after a reboot. Installer executed well, but ended with an error 0 x 80070017 and problems of copy of (unknown) files. The solution (found after a few hours...) was to burn a new installation of Windows Server DVD. I don't want to talk about it anymore...

  -Christoph

• A problem with Windows Server 2008, Enterprise Edition

  Hi, I have a problem with ad on windows server 2008 Enterprise that when I try to install active domain services directory for me this message appear:

  
  
  http://img826.imageshack.us/img826/7508/39552832073804633241230.jpg
  
  Notice: I'm sure that password is complex and I erase and I disabled complex password policy and it appears again.
  Anyone has a solution or this problem before him

  Hello mohammedtayea,

  The question you have posted is related to Windows Server 2008, Enterprise Edition, and would be better suited to the TechNet ITPro community.
  Please visit the link below to ask your question in a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you

• Problems with the files of FoxPro 2.6 in Windows Server 2008.

  Dear Manager:

  We have some files of FoXPro 2.6 for example "AddUser.DBF" file that can be read in Windows 2000 Server or Windows Server 2003 by a "Microsoft Visual FoxPro OLE DB provider", it can read the file "AddUser.DBF" by our ASP.NET 1.1 (Visual Stodio 2003) web application, no problem.

  We have been using MS Windows Server 2008 R2 now.  But when we installed "Microsoft Visual FoxPro OLE DB provider", he cannot read the file "AddUser.DBF" by our web application ASP.NET 1.1 (Visual Stodio 2003) on the MS Windows 2008 R2 environment.

  Do you have a solution to this issue?  You have another type of Microsoft Visual FoxPro OLE DB Provider for Windows 2008 R2 help?  Then it can read FoxPro example "AddUser.DBF" file?

  When you get a chance, please answer my question.

  JiXing (Peter) Wang | Database administrator, TetraTech AMT
  Direct line: 703-841-2239 | Main: 703-841-2684
  Fax: 703-465-9158
  E-mail address is removed from the privacy *.

  Hello PeterWang,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Tengo el mismo problema con Windows server 2008 r2 (x 64) (same problem)

  Quiero recover form security incursions con Windows Server 2003 SBS in Windows server 2008 r2 (x 64), Biogen trabajando con el ultimo parchment http://support.microsoft.com/kb/974674 (ID of Article: 974674 - last review: January 27, 2010 - revision: 2.0) y baje las versiones in Inglés y Español (updated for Windows Server 2008 R2 x 64 Edition (KB974674)) y en ambos casos el message are the same "the change are no aplicable al equipo" el server are UN hp ml350 con una cinta hp dat 72 the same as use para los realize aid for storage. The the CA BACKUP sin problemas con utilizo cinta. Habra mas nuevas plots that only estoy instalando del 27/01/2010. El of y ingles El HOTFIX (http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=974674&kbln=en-us) are only en WS2008 R2 (standard) as yo tengo esta in Spanish. Hace mas of months than any I can recover los datos anteriores... Ayuuuuuudaaaaaa!

  Unfortunately, the Microsoft Answers is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list, and then click the arrow button.
  http://support.Microsoft.com/common/international.aspx

  Have a great day and thank you for visiting Microsoft Answers. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• T61 4 GB RAM on Windows Server 2008 64 bit problems

  Hi, I just bought 2 * 2 GB Crucial PC5300 667 Mhz memory to upgrade my T61 that has 2 * 1 GB installed before. Hardware installation is smooth and easy, I followed all the steps in the maintenance manual. Then I restart the computer, BIOS can recognize that it has 4096MB ram installled. My operating system is Windows Server 2008 Enterprise 64-bit, which, unlike these 32-bit system, I am sure that it can handle more than 3 GB of memory. It is found in the system, and and showed there is 4 GB of memory, but in other programs like Everest, CPU - z, or Photoshop, even in the task manager all told me that there are only 2 GB of memory.

  I was confused and thinking that it might be the Crucial problem of the new memory, then I install only a SINGLE memory of 2GB each time. They can enter the system and be recognized as 2 GB. So the new Crucial memories have no problem. Then I combined the old 1 GB memory and new 2 GB Crucial memory to boot. Windows can also recognize 3 GB ram but only 2 GB of it can be used.

  It seems that 2 GB is the threshold of this system, any combination of greater than 2 GB can be recognized but cannot be used. However, it should not be like this since Windows Server 64-bit, theratically it can manage more than 512 GB of memory. That's happened? What should I do to remove this threshold? Windows problems? T61 problem.

  BTW, I've updated the BIOS of the laptop to the latest version. 01/07/2008

  This is the snapshot of the screen, my Windows is the Chinese version, but the crucial information is in English.

  http://farm3.static.Flickr.com/2194/2949357419_857717624d_o.jpg

  How dramatic is... It seems that I can use all 4 GB right now. I made a few changes and changes of the last

  Boot, however I don't know that we are contributing to the problem.

  During the last closure, I

  (1) switched the 2 Crucial memory slot,

  (2) put on the battery (it has been disconnected since the first time I changed the memory).

  (3) disabled windows virtual memory (now my laptop only works on real RAM, Yes...)

  something like this works now, thank you wjli2!

• Installation of Windows Server 2008 R2 SP1 problems

  Since the recent release of Windows Server 2008 R2 SP1, I have since downloaded the ISO from Microsoft (SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO) and tried to install it on my sandbox (ESXi 4.1.0 260247) and I will have questions.

  The problem is that Windows does not have a driver for the SCSI controller device.  I tried to change the type of "LSI Logic SAS' to 'LSI Logic" parallel "and it does not solve the problem.  I tried to download a Windows 2008 LSI SAS of LSI driver directly (http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html) and use it, and still have had no luck.

  I was wondering if anyone has had any success in installing Windows 2008 R2 SP1 on ESX or ESXi 4.0 or 4.1?

  

  See you soon,.

  Ken

  Hi Ken

  It is the same as the previous one:

  SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO

  concerning

  Pieter

• vCenter totally blocked by the firewall of windows server 2008.

  I installed vcenter server on windows server 2008 R2 and windows firewall blocks for her communication (port 80/443/389). I checked and there are clear rules in the firewall that allow traffic as vcenter put there during the installation. But the server does not allow traffic only.

  If your windows machine is a member server in your windows AD it have up to 3 profiles of different firewall (public, private, domain,). Do not forget that all the rules part of the 'area' or better 'public' profile If windows cannot reach a DC windows during startup it does not use the firewall profile 'area' and you cannot access the services of vcenter in this case.

  Concerning

  Joerg

• Problems to use Windows Server 2008 R2 64-bit on ESX 3.5 U3

  I am having some problems with Windows Server 2008 R2.

  I was charged with the creation of 2 new Windows Server 2008 R2 servers. We have ESX 3.5 Update3. I found that in my attempts to put an address static IP in the virtual machine, the system crashes. If I leave the adapter to DHCP, it seems to work longer, but this obviously doesn't work. Just to be in the IP menu type in IP (do not hit OK or apply again) will cause the console screen lock.

  I found that since the release of ESX 3.5 U4 notes:

  x 64 versions of Windows Vista and Windows Server 2008 operating systems require Microsoft hotfix

  x 64 versions of Windows Vista and Windows Server 2008 without Microsoft hotfix http://support.microsoft.com/kb/950772 operating systems have a situation where the guest operating system is not responding and returns the following error:

  MONITOR of PANIC: vcpu-3: SAY vmcore/vmm/cpu/segment.c:430

  I was not able to find the error code in my ESX systems, so I can't confirm that I see the same question. I moved the virtual machine of 4 different hosts in the same cluster with the same results.

  Here are the best true - I built the virtual machine from scratch and configured 2 GB RAM, 1vCPU and 40 GB slim HDD put into service. With no OS, I cloned this config for the 2nd of 2 servers that I need to install. I traced the two VM 2008 R2 ISO we have on our Image data store. Both installed at the same time. Given their Unique IP and Machine names and joined them in the field. Once that ended, I migrated my cluster Corp Server2 to my cluster off site for DR purposes. The only change in config is the VLAN on the remote cluster.

  The two systems worked very well. As I returned to server 1 to start install application - lock. Reboot, login and lock. This is where I started to move the virtual machine to other hosts of the local cluster. I have found no point in troubleshooting, I'll just clone server 2. I deleted the name of the Server1 computer. Off of Server2, cloned it more to the local cluster. I then started without the NIC on so I could change the name of the computer, IP and add to the domain. This seemed to go well, I have been brought back online and start installing the application. Until I'm at the point of launch the installer app - lock.

  2 on the remote cluster server works smoothly. I have validated the ESX host on all host versions to make sure I was in the same field of play on both sides - check. No other Server 2008 seems to have this problem.

  I will delete and rebuild 1 server from scratch, but I don't see how I can do a clean install of ISO any different for the same hardware and best results.

  I checked the link to the fix for MS, but article reference Server 2003...

  Is there something that I am on?

  Addendum:-I find it strange that although I have 2008 R2 installed, the drop down menu to comments what OS in VM config allows only to 2008 (64-bit) for the selection nearest you. If you look at the field Server guest operating system in a nutshell, it says that NT 4.0 is installed. Is this just a problem of display text with this version, or a cause for concern? I found everything all the R2 are displayed as NT4 in the Summary tab.

  Corrections - it seems Server2 locks as well at the opening of the Server Manager window - I can see the "collection of data...» "downstairs. I had also opened the work center & gt; Properties window on top of the Server Manager window. VM has ceased.

  Addendum - I found that R2 the boot safe mode with networking to adjust the TCP/IP offload to disabled results in a locked VM when in network properties.

  2008 R2 is not on the official list of guests supported, and others have reported problems with it as well.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• Willy Introscope in Windows Server 2008 R2 Instalation problem

  I am not able to launch willy introscope setup in windows server 2008 R2? Its a must program for me to install. It is a the latest version .exe file. Whenever I click on this file, nothing happens. I tried to use run as Admin, but it is also useless. Help, please

  Hi HrishavSinha,

  Your question is better suited for Windows Server 2008 R2 on TechNet. Please post your question in the TechNet Windows Server 2008 R2 forum.

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general