Windows (Vista) Impossible to check updates, 80244004 error code
My system shows status bar that updating windows icon with the message "Windows cannot check for updates. When I run the update of windows is gives the error code 80244004.
Windows Update displays "check more recent updates 14/09/2010" and below that it shows "updates have been installed 13/08/2013.
According to the "history of the updated" the following updates have been installed since my laptop worked again:
-Microsoft .NET framework client profile 4 for windows vista x 86 KB982670, date of installation 08/13/2013.
-Update for windows KB928439, date installed 25/08/2013,
-Multiple copies of the fix for windows KB947821 (analysis of system update tool).
It was the last before update:
-Update for windows defender KB915597 (definition 1.89.1145.0), date 09/07/2010 installation.
Roland
Hello
I only see the answer from here-
We know if that helps.
Tags: Windows
Similar Questions
-
original title: could not resolve the problem of Windows Vista Service Pack 2 update!
Hey there,
I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!
Thank you very much
UD
Hi Electrocuteud,
You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.
-
Windows Vista Impossible to check updates
My computer is unable to check the updates seems to be stuck configuration update June 19, 2012. I tried the fix tool but no error code 80080005 successshows ideas please?
Fact: Applications, (Norton and McAfee) are known for do not uninstall or upgrade properly. The 'leftovers' Norton is the most likely culprit here. Roll up your sleeves & cross your fingers...
ACTIONS
[You may want to print these instructions for reference offline. IMPORTANT-don't SKIP ANY STEP online & to perform all the steps in a 1 session uninterrupted - to allow a minimum of two (2) hours! [If a step said to restart, restart! ]
1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3A. restore backups of ARO Advanced repair all (if any), and then restart.
3 b. Uninstall ARO Advanced repair 2011 [Yes, even if you paid for it!] & restart again. [1]
4. After completing some you have a copy of your key of handy product, uninstall Norton 360 and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.
5 IMPORTANT! -Online enable WF immediately after the reboot! [Should be automatic, but I want you to check.]
NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!
6. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.
7 do a clean install of Norton 360 Version 6.x (using your product ID, if need be; the upgrade is free) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.
8. manually and repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.
9. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [2]
Note: Good for IE9 & IE7, too.
9. right click on the file downloaded in # 9 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.
9. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 9 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.
10. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [3]
11. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
Note => for best results, check the option Remove personal settings .
12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
12 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...
12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]
13 reset once more.
14. download Adobe Flash Player v11.4.402.287 installed. Open Internet Explorer (ONLY!) to this page-online http://www.adobe.com/go/getflash
Beware of the pre-selected options to install unwanted third-party software (e.g., McAfee Security Scan Plus;) Google toolbar; Google Chrome).
15. your version of Java is badly outdated & submitted to thousands of security vulnerabilities. Download Java Version 7 update 9 installed & all previous versions (for example, v1.6.0_33) removed as soon as possible! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46326
15B. When finished, remove your Java cache by http://www.java.com/en/download/help/plugin_cache.xml
16 restart one last time, then run a manual check of updates & see if you manage to install all Security updates offered (e.g., KB2744842, KB2724197, KB2661254 & KB2749655); Follow all the instructions.
17. in response to this post with a status report.
Good luck!
TIP: Consider upgrading to Firefox v16.0.1 or just uninstall Firefox.
=========================================================
[1] injudicious use of registry cleaners can play a role here. TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx[2] trust Source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en
[3] after that we ended up this thread, do not hesitate to reaffirm Firefox as a default if you wish.
[4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.
-
Update for Windows Vista (KB971644) platform has failed. Error code 80070422. When you start the computer, it fails to configure the updates, and then comes back changes.
Error message when you try to install updates by using the Windows Update Web site or the Microsoft Update Web site: "0 x 80070422:
http://support.Microsoft.com/kb/958043What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)? Who were these applications that run in the background when you installed the Vista SP2?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003
activate Windows vista ultimate 64 bit
cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003
Hi Jarska,
· You did changes to the computer recently before the issue started?
· If your computer came pre-installed with Windows Vista, or you don't have it installed separately?
You receive this error 0xC004E003 when the Software Licensing Service reported that license evaluation failed on your computer. You can access the link below and follow the steps in method C and check if that helps you solve the problem of activation. If the C method does not work, you can follow the steps in method G and try activation using the automated phone system.
http://support.Microsoft.com/kb/931276
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows Update loops round and round constantly to not set up correctly, then restores the changes
Do I need to install the System Update Readiness Tool KB 947821?
Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.
Given that this problem is after a fairly recent install of SP2...
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this="">=pick> ).
In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":
1. stop the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > Right click on run , and then select run as administrator >
(type or copy/paste) %windir%\SoftwareDistribution > [OK]
Open the download folder and delete its content
Close the window.3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.
4. start the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click Start
(Stopping the service will take a moment)=====================================
To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot install windows vista service pack 1, 57 gives error code
When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?
Hello
(1) what is the exact\complete error message you get?(2) remember to make changes to the computer before the question?See the methods mentioned below and check if that helps.Method 1:Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Back up the registryNote: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.Method 2:How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issuesNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.Method 3:The problem with Microsoft Windows Update is not workingHope this information helps. -
Update Windows Vista crashes with 'check updates'
Last month, Windows Vista updates began to hang on to the 'check updates'.
I have: 1. tried all the fixes I could find.
2 reloaded Vista with SP1 from a recovery partition.
3 update worked until SP2; SP2 downloaded and installed OK.4. then, the update said I need latest update agent (7.6.7600.256). Downloaded and installed OK. At this point, the Windows update fails.
5. If I uninstall SP2, but let the agent update, it works. When I reinstall SP2, it fails.6. I have installed a completely different image of Vista - this one was integrated in SP2. This version fails in the same way.
7. I ran SFC, CHKDSK, System diags, updated all my drivers updated BIOS and replaced the memory. As far as I can tell this is the only thing that does not work on my PC.
Anyone has any ideas. ? -Thanks!
Hi Ichabod22:
Thanks for your comments, and happy this worked. I did have the chance to try this workaround yet - my phase "check for updates..." ran for 4 hours during my may 2016 updated Patch Tuesday before we found 16 available updates - but quite a few users of Win 7 SP1 and SP2 of Vista are now reporting that before installing these updates Windows kernel mode driver (Win32k.sys) each month (for example the KB3145739 in April 2016; KB3153199 in may 2016) reduced their updates for Patch Tuesday to hours to minutes.
I doubt that this is a permanent solution so be sure to check the page Web of Dalai Search for Windows Updates takes forever?-a possible solution next month to see if a new version of Win32k.sys is available for download from the Microsoft Download Center before your race updates your June 2016 Patch Tuesday.
Woody Leonhard has published a series of articles on of temporary workaround in his Woody on Windows blog, including Windows 7 update scans still holding? KB 3153199 can solve the problem, so congratulations to Woody, Dalai and others to share this potential solution.
------------
32 bit Vista Home Premium SP2 * Firefox v46.0.1 * IE9 * NIS v21.7.0.11
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS -
Windows Vista Service Pack 2 update (KB9448465) Failure Code 80200013
I tried several times to install this update. Whenever I get up to 45%, and it stops telling me he could not install and gives the error code 80200013. Help, please.
Proposed response:
Hello Chavumaboy,
I hope you do well. Chavumaboy, to solve this problem, try to perform a clean boot and then install a standalone package for Windows Vista Service Pack 2
> Minimum will disable all third party services. It allows to eliminate software conflicts. Please follow the steps below to perform a clean boot:
-Connect to the computer by using an account that has administrator rights.
-Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration
Utility.
-If you are prompted for an administrator password or for confirmation, type your password or click on continue.
-On the general tab, click Selective startup, and then clear the check box load startup items.
-On the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
-Click OK and then click on restart.> See the link below to download and install the stand-alone package for the Service Pack 2 for Windows Vista:
Please go through the link below for more details:
http://support.Microsoft.com/kb/947366
I hope this helps.
Thank you.
-
Windows 7 drivers do not update. Error code 80070103
Logitech says tech check with microsoft for necessary to drive use c920 webcam. Unit works with the older 32-bit W 7 O.S.. But not with my O.S. 64 b driving or updates "fails" at the bottom of load. More than 20 different updates. More than one is come with
(Error code 80070103)
Any help appreciated
Nightdriver
Hello
Thank you for your update on the issue.
I'm sorry for my late reply. Basically, the website auto detects your Windows 7 architecture and download the appropriate version of the driver. You can also check the properties of the architecture of your system and check with driver version to download from the Web site.
Another way around the problem is that, as the webcam works perfectly with Windows Vista, you can download and install the version of the Windows Vista-compatible driver and run the program in compatibility mode as shown in the following link.
Make older programs in this version of Windows
Please post back your results for assistance.
-
Try to install Windows Vista KB2904266 and it keeps fault - error code 800F0818
I tried to install the update of Windows Vista KB2904266 for a few weeks now and it keeps failing. Really, it isn't as if it were still able to install anything - 0% installed. Then I have a 800F0818 code error update failed. Other updates were installed successfully, but it will not be installed. I had others fail too in the past. I do not understand why some updates install successfully while others do not.
Q: is- KB2904266 theonly update that fails to install or...?
Re: [Yes]Q: do you reside in Morocco, Libya, Fiji Islands or in the mid-Atlantic area (i.e., UTC - 2)?
Re: [No.]Do not hesitate to leave hidden KB2904266.
-
I can't install windows vista service pack 2, receive the error code 490
Tried to install Windows Vista service pack 2. (KB948465). Received: Installation failed. Also: element not found. Error: ERROR_NOT_FOUND (0 x 80070490). and finally the code 490 - Windows Update encountered an unknown error.
Hello
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
-
Update Windows in Windows 7 will be not updated.
Error code 80244008.
Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".
You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Impossible to install updates 800700c error code 1 is up.help required with problem
computor model Fujitsu amilo pi3410
Hello
1. the updates of windows are getting failed?
2. don't you make changes to the computer before the show?Method 1
I suggest you to run the fixit from the following link:The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2
I suggest to perform the clean boot and then try to install the updates.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.Method 3
I suggest you try the steps from the following link:Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. -
do not install windows vista service Pack 2 and received error code 800f081f
I tried to install windows vista service Pack 2 used by windows update and did not erro code 800f081f. I tried soft micro that it fixed and still couldn't install pleasehelp
Hello
Learn how to install Windows Vista Service Pack 2 (SP2)
http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366You select Download - SAVE? After download go where you put it and right click
on and RUN as administrator.Download Service Pack 2 x 86 32 bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = inDownload Service Pack 2 x 64 64-bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = inCreate a new ADMIN account with your password - same then REBOOT (do not logoff) and
log on to the new account and try the download.How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791/Service Pack Center
http://Windows.Microsoft.com/en-us/Windows/downloads/service-packsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
MacBook Pro 15 "mid-2014 retina start small icons
Hello, my MacBook Pro 15 "retina of start up in resolution lower scale which appears nationally for a 47" 2880 x 1620 monitor. It is boot in a mode as if an external monitor is connected. I am writing this post on my Lenovo Thinkpad because the scree
-
The block 'add exception' is not active
The block 'add exception' is not active in the section "I understand the risks" untrusted connection. I had to use IE to access my wireless router? Any suggestions? I am running Firefox under Win 8 17.0.1. Keith Brewer
-
problem faced during the installation of Windows 7
Hello Sir, I have HP Pavilion laptop modl g6... I'm trying to install Windows 7, but the startup option does not display when I insert the disc and restart... will you please suggest me something that I'll install window 7 on my laptop...
-
Satellite A60 crashes with BSOD using the WLan connection
Hello The son laptop works well 24/7 If you use the local cable network on web access, but as soon as we install Wifi it crashes on a regular basis (2 or 3 times an hour) with BSOD error messages - normally those helps Microsoft cant (via the event v
-
My custom icon does not appear in the taskbar or in the upper left corner
I'm using LabVIEW 8.6 to generate an executable file. I use 16 x 16, 4 bit color icon. The shortcut is on the desktop, but it does not appear in the project view, it does not appear to the left of the name of the application in the taskbar or in the