Windows xp Setup restarts after reboot

Similar Questions

• How can I stop Windows from automatically restart after installing updates?

  original title: How to prevent automatic shutdown / restart of Windows 7

  Restart of Windows 7 is the default setting and it is a huge security risk and can cause defects and severe data loss.

  When I perform backups at night or copy / paste a huge database of files and Windows 7 and other applications are a reboot themselves, forming a huge security risk.

  • Windows 7 this is enabled by default
  • Some applications that in case of default.
  I disabled automatic arrΩt in Windows Update options, but the question is how to prevent Windows 7 Auto Shutdown?
   

  
  

  I think that the answer you are looking for is in the following link

  http://www.nirmaltv.com/2010/04/08/how-to-disable-automatic-reboot-in-Windows-7-after-updates-installation/

• Stucks update Windows Server R2 2012 after reboot to 9%

  Hello

  I installed windows server 2012 R2 on IIS, SQL Server, TFS and some other products from Microsoft. After finished installing, I ran the update of windows asking to restart the installation.

  After restart, update continues up to 9%, then it stops forever!

  I didn't start with the safe mode or last good known configuration mode!

  I don't have an image restore CD for my installation.

  What should I do? How can I solve the problem or cancel the installation?

  Thanks for help.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Windows 7 laptop restarting after being out of hibernation after Windows Update

  A Windows 7 laptop is force a restart after coming out of hibernation when Windows Update is scheduled to run during the time, he was in hibernation. The user doesn't have a choice, even if theNoAutoRebootWithLoggedOnUsers option on windows update registry key is set to 1.

  Is - this intentional? Are what solutions there?

  Thank you

  A

  Hello

  This problem occurred for many users.

  See this link for a possible solution-
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/7353bcf5-4d1b-4657-aac5-84da5f8988d9

• Defender of Windows guard turn off after reboot

  original title: Vista Windows Defender

  Defender of Windows guard turn off after the restart. How to fix this?

  Defender of Windows guard turn off after the restart. How to fix this?

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If the scenario above does not concern you, here's how to re - start Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows failed to restart after installing Nokia PC Suite

  Hello world

  I hope you can help me with my problem. I have an old nokia pc suite version family installed in my laptop (about 6 years old - basic Windows Vista Edition operating system), but today I decided to upgrade to the latest (suite version 7). I was able to install it successfully. When I launched the app, it worked fine, but when I plugged my phone (Nokia X 2) via a USB cable which has been when I started having problems. When I inserted the usb cable provided with the phone to my laptop, a prompt appears that my machine was installed the drivers for my device. After about 5 minutes, the installation is complete and it prompted me to restart my computer and so I did. Before it turns off, the machine said he finished the updates first and then he did. When he returned, Windows doesn't have to load and restart my computer.  The full error message: "cannot start Windows. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose the language settings and then click on "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: ntoskrnl.exe
  Status: 0xc0000098
  Info: Windows could not load because a required file is missing or corrupt. »

  I already followed the instructions I have the disc with me, but my laptop still does not work. I did repair the boot and system restore, but it does not solve the problem. Please help me. Thank you very much!

  Hello

  I suggest to try to start the computer in safe mode and check if you can start:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Since you've already tried to repair the boot and system, restore and if you are not able to start the computer in safe mode, then try to contact the manufacturer for help.

  It will be useful.

• Audio-Midi Setup reset after reboot

  Hello

  I have the problem, very frustrating that my settings in configuring audio-midi-keep the reset with every reboot.

  So I tried the com.apple.audio.AudioMIDISetup.plist in Preferences, but there is no files and no Audio folder.

  It seems that Mac OS X problem create this configuration file.

  Would be nice if someone could help me here.

  concerning

  Info: I upgraded from the Mavericks in El Capitan Yosemite without. I also had some network problems, and removing the plist of network has helped here.

  Please triple - click anywhere in the line below on this page to select:

  ~/Library/Preferences/com.apple.audio.AudioMIDISetup.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ display info in the Finder (or simply to view info)

  of the menu.* contextual Info year dialog should open.

  ☞ Is the dialog box display "You can read and write" in the section sharing & permissions?

  Article in the General ☞, is the locked box checked?

  ☞ What is the modification date?

  If you do not read and write access to the item, change the settings as directed here. Note, however, that if a file has incorrect access settings, probably others as well. If the item is locked, unlock it.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. Open a TextEdit window and paste it (command-V). Select the line that you just pasted and continue as above.

• Windows XP keeps restarting after blue screen

  I tried to reboot in safe mode, normal and the latest, but nothing works.  The blue screen appears for a second then restart my desktop computer.  The technical message I get is "stop: 0000007E (0X8A713510, 0XBA50B7EC, 0XBA50B4E8).  I checked the previous similar responses to this problem, but I've not seen one adapted to these numbers.  Can anyone help?

  My fault, it's stop: 0000007E (0xc0000005, 0X8A713510, 0XBA50B7EC, 0XBA50B4E8)

  First, it is important that you find a way to copy all your data before doing anything else.

  Unfortunately, a number of things can cause what you are experiencing! If you are not that technically savvy, you may need to find a PC tech.

  Hardware problems can certainly cause BSOD. Here again, your happened recently, if you can perform what is commonly called a manual system restore:

  http://support.Microsoft.com/kb/307545

  You might luck with that.

  If it doesn't work, you can try a repair installation:

  http://michaelstevenstech.com/XPrepairinstall.htm

  And then, if you have a hardware problem, no amount of repairs or relocation you won't help. You will need to troubleshoot hardware, which may be too advanced for you.

• Windows will not restart after running updates.

  The last 2 times I ran the updates my computer will not re-start automatically.  Blue screen appears with the message indicating that Windows has been arrested to avoid damaging the computer.  If the first time screen seemed to shut down and restart.  Then a message says that if a software or a hardware had been recently installed must be removed. Why Microsoft Webcam has been reinstalled during execution of updates that I don't know.  Running updates the problem or software for this webcam?

  The last 2 times I ran the updates my computer will not re-start automatically.  Blue screen appears with the message indicating that Windows has been arrested to avoid damaging the computer.  If the first time screen seemed to shut down and restart.  Then a message says that if a software or a hardware had been recently installed must be removed. Why Microsoft Webcam has been reinstalled during execution of updates that I don't know.  Running updates the problem or software for this webcam?

  Hey RetREMF

  We cannot say what update is the cause of the problem

  one thing that you should never get 3rd party drivers from windows update hardware

  Find them directly in the hardware manufacturer's Web site

  I suggest that change you how to receive updates to try to find the exact problem, we by installing one at a time

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need or who have limited access to Internet

  Walter, the time zone traveller

• ESXI 5.0 with Microsoft Windows 2003 lost RDM after reboot host Cluster

  Whenever I need to do maintenance on an ESXi host who has a 2003 microsoft cluster after the host is restarted all RDM Cluster Microsoft disks loses access to the RDM disks and displayed with 0 KB size. Only it is possible to restore the cluster off the second node of a Microsoft cluster and by removing and adding RDM disks. Someone already had this problem?

  You can find this information in the installation guide MSCS (see http://kb.vmware.com/kb/1004617)

  André

• Windows does not restart after you install the new hard drive.

  Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

  Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

  The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

  every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

  I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
  And if a later version of the sata it's backward compatible?

  Use the utility disk provided by the manufacturer of the drive check

• Windows Vista keeps restarting after the installation of updates

  How can this be repaired?  I have not activated the system restore.

  This thread has the fix:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9 If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• DB-autostart after reboot

  DB version: 11.2
  OPERATING SYSTEM: AIX
  
  For a DB application, I want to configure Auto-start after reboot of the operating system. I was under the impression that this evolution "n" 'Y' in the/etc/oratab file will do the trick. But after some googling, I found that more needs to fact.
  
  What is the professional way to configure Auto-restarting after reboot for a stand-alone database. I found the following url that describes the start automatic 8i. Is still the way to do it?
  
  http://www.Bolthole.com/Solaris/Oracle.html

  In the mentioned link, he always calls Oracle scripts

  Su - oracle - c $ORACLE_HOME/bin/dbstart
  Su - oracle - c "start ORACLE_HOME/bin/lsnrctl $".

  In 11 GR 2 it in the bin folder, you can see lsnrctl but not dbstart. You can check below link depending on your version

  http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php

• After reboot windows take position reset)

  Hello everyone. How do El Capitan to remember the position of the windows arranged after reboot? can't find anywhere. Help, please.

  Is that what you're after?

  Check the "Reopen windows when you connect in" before selecting restart.

  

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.