Wireless connection not detected

Similar Questions

• HP Envy 5640: my new printer is connected wireless but not detected by the computer

  I installed a new printer, but when you try to print, it records in PDF format instead of print. The wireless connection is good and shows the printer as the default printer.  How can I change the settings of the recording to printing?

  You are welcome.

  To enable connected HP support options, click the devices tab.  Touch the icon and enable webservices. If you have already activated webservices, touch "Print information Page."  Claimcode of the printer to add the connected HP printer. Or, if you want, call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I'm sure that the printer you see so-called 'Network' would be wireless. Make the default and try a test print.  If this fails, try the other being default and do another test.  Once remove you the one that is active, right-click on the printer late heading and delete it.  Worst case if that happens again call short number above.

  Have a great weekend,

• Connection has limited or no connectivity / wireless network not detected

  So two problems here

  1. I used to transfer studies ultrasound scanner for my HP Mini 110 - 1025DX PC. For this I used to establish a connection to the system, where the name of the internet connection was same as in HP mini and address IP was also the same, except for the last digit (i, e XXXX:XXXX:XXXX:XXX1 vs XXXX:XXXX:XXXX:XXX2). Firewall Windows should also be disabled for mini HP transfer studies. I repeated these steps after reinstalling windows but icon in the mini bar of task HP says limited connectivity or none and so I can't transfer studies. How can I solve this problem.
  2-HP mini also has Wi - Fi. Is there a way can mini HP tell me networks wireless in my range so that I can choose mine, key network related so that my wireless internet access also starts to work.  I'll be very grateful for any help.

  You want to connect your mini to the ultrasound with a cable machine and the mini to your wireless router to access the Internet.

  The next part of the instructions

  Right-click on the icon for your wireless adapter and select Properties

  should have been

  Right-click on the icon for your Ethernet card, and select Properties

  in order to properly configure your Ethernet (wired) connection to the ultrasound machine.  Sorry for the mistake.

  And, of course, if the mini is connected to the machine to ultrasound with the Ethernet cable, it is not to connect to the Internet via cable.

  Maybe you need to explain more clearly what the situation is.

  • The ultrasound using a cable or a wireless connection?
  • You want to be able to plug a cable between the mini and the ultrasound machine and when you have completed data transfer, connect a cable between the mini and your router?
  • When you "used to transfer studies ultrasound scanner to your HP mini" could you unplug the cable from the ultrasound machine and connect it to your router and connect to the Internet?

• Wireless mouse not detected in Windows 8

  computer doesn't detect mouse Microsoft 1679 wireless model. I am running windows 8.0

  Original title: wireless mouse

  Hello Peter,.

  We are sorry for the inconvenience. Let me help you.

  Before you go, let us know a few more details on the sub questions.

  • What is the brand and model of the Windows device you use?
  • What is the status of the device mouse under Device Manager settings?
    Press on logo Windows + R > type devmgmt.msc , and then press ENTER to open the Device Manager.
    Note: Unknown and uninstalled devices are listed under other. The device will have a yellow to this topic alert symbol. The properties of the device indicates that no driver was found.

  Now, follow the methods and check them off below if it can help solve the problem.

  Method 1

  Make sure that the Bluetooth settings is enabled on your device. Follow the steps below.

  1. Turn on your Bluetooth device and make it discoverable.
     The way that make you it discoverable depends on the device. Check the device, or visit the manufacturer's Web site to find out how.
  2. Click the Start button > type Bluetooth > select Bluetooth settings in the list.
  3. Activate Bluetooth > select device > pair.
  4. Follow all the instructions if they appear. Otherwise, you are done and connected.
  Your device Bluetooth and PC will be connected usually automatically each time that the two devices are in range of each other with Bluetooth turned on.

  Method 2

  Material and device Troubleshooter

  Follow these steps to run the Windows in built store. It is a diagnosis that identifies any associated potential driver issues present in your PC.

  (a) write Troubleshooting in the search charm and click on enter.

  (b) click the Troubleshooting .        

  (c) click view all in the upper left corner.

  (d) select the material and devices in the list.

  (e) click Next to run the hardware and devices troubleshooter.

  If this does not help, run the fixit from following link and how it works.

  Hardware devices do not work or are not detected in Windows

  Write to us with updated status and the information required to allow us to help more.

  Thank you.

• Wireless connection not connected

  Original title: wireless connection

  I am running winxp and have a netgear wndr3400 wireless router. my laptop will not recognize the wireless network, regardless of how many times I install it. The network connection again, it is not connected, but it is! I'm at my wits end with this thing. Anyone can connect to it, except me. Help!

  Hi rowinghome,
   
  Here is an article that lists resources to help you solve problems of network connection in Windows.
   
  In Windows network connection issues

• Photosmart Plus B209 wireless connection not available

  Hello

  I just got a new Photosmart Plus B209 because my old 4580 died. I had the old printer put in place for the wireless connection, but the new Photosmart told me that the network is unavailable. When I press help he told me to make sure that there is no connection and to check for interference. Well, there are none. Printer and router are almost side by side. I used the HP set up guide and he tells me that the network is not available (which it isn't because otherwise I wouldn't be able to write this online).

  I use a MacBook with a Timecapsule 10.5.8 and a cable modem D-link.

  Yes, the workaround is a bit tedious, but it works.  If you have another router (standard), we all connect to one and use WPS.

  In any case, let's try this:

  1. on the front of the printer: Setup > Wireless > default settings.

  2. on your look of computer for a wireless called "hpsetup".  Connect you to it.

  3. print a network Test Wireless in the menu of the wireless printer.  Get the IP address of the printer.

  4. type the IP address of the printer in the web browser address bar.  You should see the page in the printer settings.

  5. click on the network tab, and then start the wireless configuration wizard.  Follow the instructions.

  6. when the printer is connected to your wifi, re - connect your computer to your wifi and add the printer in system preferences > print & scan (click the sign '+' to add the printer).

• USB connection not detected for Samsung Fascinate

  I have a smart phone Samsung Fascinate 1500.  When I connect it by USB to my computer, the computer no longer detects it as a media device or mass storage mode (although it worked fine the first few times).  The phone also does not detect the connection and simply seeks to charge the battery.  I downloaded the latest drivers and tried allowing pop ups without success.  Any ideas?  I cannot download my music, and it's a lot of time to transfer photos by other means..., including that I had to buy a SD card adapter.

  The USB port works with other devices.  I don't think that the USB cord to my phone is the problem, as others have shared this problem in other forums.  Does anyone have a solution?

  Hi Lin,

  1. have you tried to connect the phone to another computer?

  2. have you made any recent changes of hardware software on the computer?

  Test the device on another computer. Additionally, make sure that the software provided with the Samsung phone is updated.

  Please visit these links for more information:

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  Problems with USB devices:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this information helps!

• Wireless connection not working do not. WLAN start not

  My wired connection works perfectly, but the wireless connection does not work.

  Autoconfiguration WLAN service does not start. It displays ERROR 1747: authentication service is unknown.

  I've tried the checker system SFC.exe tool
  It says "Windows Resource Protection has not found any breach of integrity."

  I use Windows 7 Homebasic. Dell.Please help.

  Reset the Winsock seems to help some users.

  No Internet access. error 1747. and the dependency service or group failed - Microsoft Community
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/no-Internet-access-error-1747-and-dependency/db14d65b-6e9d-4964-93a0-e0b00506d7f6

  I would create a system restore point before you try to reset the Winsock.

• Wireless device not detected after upgrade of windows 8

  I upgraded my HP Pavilion dv6338se notebook PC for windows 7 to windows 8.  Now the wireless device is not detected when I check the settings.  Device Manager showed a coprocessor that didn't have a driver, I downloaded a driver NVIDIA GeForce Go 6150 and the coprocessor error is now gone.  I also updated the BIOS with the latest driver from HP.  Still no joy with the wireless.  Any suggestions/help would be greatly appreciated.

  Hello

  It seems that windows is unable to find the drivers for the Wifi card and the HP pavilion dv6338 model can not have updated drivers for Windows 8 on the HP website.

  I'd still be recommendyou to check with the help of HP if they have updated drivers for the model you mentioned.
   
  HP Pavilion dv6338se PC drivers
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3370345&
  Contact HP consumer support
  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&LC=en&product=3370345
   
  Hope the helps of information.

• HP Pavilion dv6-3010 Wireless Internet not detected

  System supplied with Windows 7 64-bit edition.  Installed Windows 7 Professional 32-bit (full install no upgrade).  My home and work wireless internet connections work in the HP Quick Web, but there is no visible wireless internet when I am connected to Windows.  The wireless icon is blue and I he switched on several times but still can't see the available wireless internet connections.  It seems that there must be some pain option that prevents the computer from even trying to get wireless connections.  Help please.

  In addition, a little independent I disabled the HP Quick Web and now cannot bring him back.  I tried to follow the instructions in my little guide but I don't have an icon in my control panel or a program for that.  Any other ideas on how to get this option back?

  triangle again... Put it in an attachment... and Yes, the driver is available on the download page for the pilot product... If can get the last 2 charaters, can I get the driver link for you...

• T400 no wireless device not detected in Device Manager.

  Hello

  I have a problem. I bought a new T400. As for specification - it has WLAN (EAN: nm322us).

  Dealer information:

  Wireless network Yes

  Standards wireless a/g/n

  Type of wireless card Intel WiFi Link 5300AGN

  But no wireless network card detected (in Device Manager), when the computer starts.  No in the bios for the WLAN mac address. So, where is a problem? A dealer cheated me and there is no WLAN in this computer? Or are there problems with the detection of devices of MS Windows Vista Business? Can anyone help? Thanks in advance.

  Solved. The problem was that activate WLAN in BIOS was 2 places -strange. Update BIOS maybe after. Before the upgrade - as usual-, I looked in the network section (to activate WLAN). There was no option, besides, to activate the wired network. I don't know if it was in the other section (System i/o ports) before the BIOS update, but in my opinion - in any case, it's strange to Wired and wireless in separate sections network devices. Thank you very much for the help.

• Wireless connect not identified Netwrok

  I have a Pavillion dv6 comes with Vista Home. It also came with the option to upgrade to Windows 7. I updated to Windows 7 and now I have no wireless connectivity. I have other laptops Windows 7, and each of them to connect successfully to the same router.

  He seems to find the router, but when I try to connect, it says "unidentified network". I don't have any problems wireless until the upgrade. The upgrade was made with HP supplied CD.

  I have disabled/endabled wireless adapter. Reset the router and the modem. Performance of virus may.

  I hesitate to make router changes since my other laptops connected successfully.

  Workaround.

  After you have applied all the advice without success, I started to disable all services unnecessary/addons/etc.

  Once I disabled the Digital Persona fingerpring I was able to get internet access.

• Wireless can not detect the connection my TP Link router (SSID)

  Hello

  I bought Pavilion G4 - 1346tx Notebook PC last Sunday(15/04/2012).

  Since then, it cannot detect/find my ssid from my router. any other device inside the House can detect and connect. only my laptop cant. My Wifi card model: Broadcom 4313GN 1 x 1 adapter Wifi 802.11b/g/n

  I tried to change my router mode and etc2, always without prevail. I downloaded the driver with the latest version (5.100.82.82 of the HP website) that the previous stock (not sure which version) are still not.

  Please help me with this. I read two or three theme with the same problem and the solution, but the solution link is broken or can not find the driver. Help me ~ ~ ~

  Thank you. Appreciate the help...

  Solved in Paul_Tikkanen to:

  WiFi problem solved

• LaserJet P1102W: INSTALLATION p1102w WIRELESS: does not detect my USB connected during installation

  I am in this picture and I can't do the installation to continue, even if I'm sure that there is nothing wrong with my USB port.

  I tried to use the same cable / usb port to print from the printer and it works.   but that's just for this installation wireless, doenst work.

  Help.

  

  Hello

  This can happen due to connection of USB oprior the installation of the software.

  In the devices Panel and printers, right-click on any instance of your printer and select remove device.

  Allow it a moment, if nothing happening try removing and reconnecting the USB after the specified screen.

  If you have already stopped the installation, don't forget to remove any existing printer device and unplug the USB, then follow the installation once more and connect it only when necessary.

  If it persists, click the background area of devices and printers and select Device Manager, is there any icon marked in different categories?

• OfficeJet Pro 8000 Wireless does not detect network

  My Officejet Pro 8000 Wireless suddenly doesn't work when connected via USB.  Don't try to re-run the HP Installation Wizard, the program reports no network detected (if the printer is right next to the Macbook Pro, which has a full signal from the network).  If I manually enter the SSID he says that he finds not only the network.  Network Configuration AMPe reports

  Network offline status

  802.11 wireless status disconnected

  Wireless on COLLAR

  Wireless works FAIL

  Network name (SSID reported no run)

  0 detected wireless networks

  The blue wireless light is turned on.

  Any suggestions?

  I appreciate the try, Dean, but again did not make a difference.

  I talked to tech support and they put me through presses the button to reset the network settings and then drain power printer, and I'm back in business.