WIRELESS Display (WIDI) does not work in 15-N208TX

Similar Questions

• Intel WiDi does not work

  Original title: How can I open this file extension *.chm kine?

  sometimes extensions unknowns gall are meet. This time need to open file "chm' extension."

  This file of intel corporation.

  Unable to locate the help file ' c:\Program files (X 86) \Intel corporation\intel WiDi\en\WiDiApp.chm ".

  If file is whether to install, but could not open it and Intel WiDi does not work.

  Thank you for your help

  Hi Sung,

  Welcome to the Microsoft community.

  It seems that you are facing problems with Intel Wireless Display. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. what exactly is the problem that you are facing on the computer?

  3. what happens when you try to open the .chm files?

  4. do you get an error message? If Yes, what is the full and exact error message?

  5. What is the brand and model of the computer?

  CHM files are Microsoft Compiled HTML Help.

  To solve the problem with Intel Wireless Display, I suggest you to update the drivers and check if it helps. You can check the link for more information:

  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031109.htm?wapkw=031109

  Alternatively, you can check the link for Intel's support:

  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  If you are always faced with the question, please answer with more information to help you better.

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Re: Satellite A65-S1067 - display driver does not work

  As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.

  Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.

  Can someone help me with this?

  Hello!

  You use the factory settings on your laptop computer or you have installed your own version of Windows?
  And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
  http://www.CSD.Toshiba.com

  And have you tried to update the version of DirectX? You can find on the Microsoft Web site.

  Sorry, but at the moment I can t tell more.

  Good bye

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite U920T - 100 PSUL1E - WIDI does not work after upgrade from 8.1 to win

  Hi people,

  is there someone who has the job of WIDI? AFAIC he had a symbol WIDI in Device Manager @W7, after the W8.1 there is no way to make it work.

  Try to use the Intel driver fails because custom toshiba Driver, the last driver from Toshiba is dated with 28.10.2013 that should be a beginning driver W8.1 or W7.

  Is this something like the functionality of GNSS Broadcom? Build but still not usable?

  Hello

  According to Toshiba information I found in the bulletin of the technical support document, the Intel Wireless Display are no longer supported on Windows 8.1, but you may be able to connect to the external display wireless, if your computer supports Miracast.

  Here is the link to the doc:

  Important notice for users of Wireless Display (WiDi)
  http://APS2.toshiba-tro.de/KB0/TSB3903IF0000R01.htm

  By the way: the Intel display driver can be installed and updated but you have to do it in the Device Manager. You need to download a zip package containing the only driver files, and then you can update the driver using the procedure in the device manager that allows you to choose the driver folder that contains only files.

• Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga

  I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "

  This message appeared after the upgrade to Windows 10 anniversary.

  Indothai,

  Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.

  For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153

  Thank you

• Back and forward buttons but does not, URL is not displayed, charging does not work. Windows xp.

  Back, forward, reload and stop also died in right click. Set the page lock also does not work, I guess because the URL is not displayed. This is the case since download FF4.

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

  The secure page lock symbol has been removed in Firefox 4.0 and replaced by the How do I know if my connection to a Web site is secure?. Unfortunately, thieves were able to build a web page that will display the lock symbol, even if this isn't a https:// site. Which could deceive a large number of users into thinking that they were on a secure site.

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Display driver does not work for Satellite L750D

  Hi Admin, how are you?

  laptop: Satellite L750D/050 PSK36A-050011
  Video card:
  Dual AMD Radeon 6480 G + AMD Radeon HD 6470 M 1 GB graphics
  (3059 MB Total: 1.5 GB dedicated + 1523 MB memory shared memory)

  I just brought my laptop yesterday,
  I format and reinstall windows7 ultimate 32 bit, and I download the display driver amd from the toshiba Web site.
  It does not work, and I went to download from Web site of amd that the drive still does not work.

  Can u please help me and tell me how to install it?

  Please, I beg you. Thank you.

  Hello

  What do you exactly because it does not work?
  Have you chosen the right driver?

  Here's your laptop where you can download the driver:
  http://www.MyToshiba.com.au/support/computers/satellite/l750d/psk36a-050011/download?OS=24

  Could you please confirm that you have used the AMD v 8,836 display driver driver?

• Intel WiDi does not work with Satellite L850 - 1 L 1

  Google translator

  object I have a computer toshiba laptop satellite L850 - 1 L 1 and a television always toshiba model 50L7335D

  I can not interfacing with intel widi, what should I do?

  Thank you all

  The Satellite L850 - 1 L 1 was preinstalled and released with Windows 8
  You always use this system of Windows 8, or that you have upgraded to Windows 8.1?

  I m application because Intel WiDi is NOT supported under Windows 8.1 on Toshiba laptops and you will not be able to use the Intel WiDi with Win 8.1

  Here are the details that I found on the page of Toshiba:
  [Important notice for users of Wireless Display (WiDi) | http://aps2.toshiba-tro.de/kb0/TSB3903IF0000R01.htm]

• Tecra A4: Display backlight does not work

  Hi all

  Thank you for taking the time to read this. I came across a dilemma. My sister laptop screen broke (baby) and it was far from always being in warranty and we had not assured him. So I bought a new screen for it and it mounted fine. When I turn on the laptop, I can hardly do anything on the screen as if the backlight does not work.

  I see that it is there, it's just very very dark. I thought this would be a problem with the inverter. So I bought a new one of those too, but alas, it still does not. I can do all things beautiful to display on an external monitor via the VGA port.

  Someone at - it ideas?

  Thank you once again

  Danh

  Hello

  I understand you want to save money, but especially help the technician is most recommended as repair by yourself.
  In any case, as mentioned, you should be sure that the cable has been connected in the right way.
  You must connect the LCD/FL cable to connector LCD/FLand connect the cable to connector HV HT. Place the module LCD, the FL inverter board in the correct position.

  Good luck!

• Satellite L20-264: wireless Internet access does not work

  I have a US Robotics router and a wireless laptop, I followed the instructions exactly in the manual to set up but the internet still does not work wireless but it works through the ethernet connection.

  Can someone help me please.
  If it helps my laptop model is 264 L20
  Thank you

  It is a pity that you describe your problem WLAN so little time and we don t know what you tried exactly and what results are there.

  For properly WLAN use two hardware components must be configured right - the router itself and laptop. It will be interesting to know on what are the instructions you wrote.

  Are you sure that your router is configured correctly?