Wireless Manager hangs on the G10

Similar Questions

• Portege M780 - 10G: Toshiba Wireless Manager cannot initialize the 3G device

  Hello

  by mistake I deleted connections used by the 3G device to connect broadband.

  Now when I run Toshiba Wireless Manager it attempt to initialize the device of wide band 3G but nothing happens.
  The laptop is a Toshiba Portege M780 10 G, 3G is an Ericrsson F3607gw and the operating system is Windows 7 Professional 32 bit.

  I tried to reinstall Toshiba Wireless Manager and the device 3G driver.

  Please, can you tell how to solve my problem?

  Thank you

  To be honest I don t understand how you could remove connections to broadband?
  However, you should check first if the 3G device is recognized in Device Manager correctly.
  If it is not recognized, this would require a 3G driver installation.

  All parts of the software can be found here:
  http://APS.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find the description step by step how to set up and establish a 3G connection via the preinstalled Toshiba Wireless Manager?
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

• Satellite Pro S300: modem 3G & Toshiba Wireless Manager Update

  I received through Toshiba Tempro an update for my Toshiba Satellite Pro S300 (W7 32-bit) for a 3 G modem and Toshiba Wireless Manager.
  After the State Manager is installed, there is not such a modem.

  This laptos has a build-in modem, where can I put a SIM card in?
  Otherwise how to install a SIM card in this laptop to have internet access anywhere where I'm going?

  Hello

  TEMPRO shows a downloaded driver information!
  The point is that laptops are equipped with different hardware components and not all models support the same hardware specification.
  Maybe your S300 has not been equipped with 3G modem but other S300 support 3G.

  However, you can check device manager if a 3G device is in the list

• AE 3000 - Wireless Manager has not installed? Help!

  Recently upgraded router Linksys EA3500 and AE3000 adapter for my laptop. Laptop is Dell Inspiron 1705 (Yes, it's old) running under XP SP3.

  Apparently the adapter drivers installed properly since the CD as it negotiates and connects with the new router. However, there are No. Linksys Wireless Manager. It seems that it was not installed at all. I can't find a folder in Program Files named Linksys or Cisco or nothing new in the list programs.

  Is there a Linksys Wireless Manager included on the CD that must have installed?

  Can I download it separately and install it?

  I disabled the built-in Dell WiFi with is radio came with an Intel ProSet Wireless Manager. I would REALLY like a new Wireless Manager which works well with the new adapter. Going on vacation tomorrow and will be faced with new and different access points, Hotels, etc.

  Thank you!

  Ken

  Hi kenh99!

  With the new linksys adapters, they have no managers wireless more as they use the automatic Wireless Configuration that is built on windows-based computers. If you're traveling and want to connect to other access points, you just use the utility windows wireless. You can check this link on how to connect your computer to an access point: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=4055.

• WUSB600N Wireless Manager

  I bought a WUSB600N and get an error during installation (Win7 64 bit) 211 from the supplied CD. Unpug and reconnect does not help. There's no other way but to leave Setup at this point, which means that the Wireless Manager is not installed.

  However, I downloaded and installed the Windows 64 drivers separately and have the WUSB600N now correctly appear in Device Manager.

  But... How can I go from here? How can I get the Wireless Manager installed if the installer encounters this error 211?

  Mike

  Just a quick update: I managed to do the work, but with the 64 bit Vista driver.

  Using the driver 64 bit Windows 7 does not work!

  Mike

• Toshiba Wireless Manager - not possible to choose the authentication protocol

  Hello

  I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.

  Concerning

  Post edited by: malo

  Hello

  As far as I know to create a new profile.
  Then you could add the APN, user name, password and authentication protocol
  But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocol

  Welcome them

• Wireless Manager do not notice when the SIM card is inserted

  I installed Windows 7 on my Toshiba NB100 and after that the Wireless Manager says 'No SIM'. I have re-installed the Manager and all the new drivers from this site, but it does not help. It worked fine on XP.

  When I look in Device Manager and smart card readers there is a TOSHIBA F3507g Mobile Broadband USIM Port and when I look at the properties of it, he said: no drivers are installed for this device. I tried to click on Update driver but the system indicates that the correct driver is installed.

  What did I miss?

  Great! Thanks for sharing this info!

• Tecra R10-111: cannot install the Wireless Manager

  Hey guys,.

  don't know why, but when I install the Manager wireless on my Tecra R10-111 Wireless Manager can be started, but not a second later, the program ends. The only option I have is to accept and put an end to the program press OK.

  I have two versions of win7 on my laptop.

  1 is the original version of Toshiba Win7 OEM, who has been on the laptop.
  --> Here, it works without probs
  --> All updated etc.

  2. is it a full Version of Win7 bought and downloaded in a microsoft store.
  --> Here it doesn't work anymore!
  --> All updated etc.

  Earlier Versions of the Wireless Manager has worked in two partitions with Win Vista and for some time, I remember that he has worked with both versions of Win7.

  What is the problem with that? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Any suggestions?

  See you soon
  Australia

  > What is it with this? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Do you think that it is a problem of the tool?
  This seems to work on Toshiba pre-installed OS, so it cannot be a question of tool!

  Maybe a part of the software is missing on the MS Win 7 own

  Have you installed the update of Firmware for 3 G Module?
  This Firmware update is necessary to obtain more stability in your 3 G connection with your Ericsson 3 G module.

  Have you installed the registry patches that are available on the page of the Toshiba driver?
  Do this!

  Good luck

• In the computer management disk management hangs when it is activated

  I'm trying to set a drive letter for one of my external hard drives. The way to do it is to go into the management of the computer, and then select disk management. I can get that far, but when I select disk management it list all my readers, but then crashes. In the lower part of the screen, it says "loading disk configuration information...". "and does not show the disc information on the screen at the bottom. I have to use the Task Manager to end the program.

  Any ideas on how to get this to work? Is there another way to set a drive letter for a local hard drive?

  Hi Klondikes,

  Try these steps and check the result.
  Step 1: Check if the disk management freezes in safe mode
  a. see start your computer in safe mode
  b. open disk management and check if it works very well.

  Step 2: If the problem does not persist in safe mode, try to clean boot
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Step 3: Check if all the system files are missing or corrupt. Run SFC (System File Checker) scan to find and repair missing or corrupt system files
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  See Change, add, or remove a drive letter

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox 38 update hangs during the rsyslog config on LinuxMint 17.1 cinnamon?

  Hello

  I used LinuxMint Update Manager to update the packages as usual.

  Firefox presents itself as an update, so I took that too far.

  In the middle of the installation while it configures rsyslog, it hangs after the display of "syslog user already a member of adm.

  He remained there until I disconnected and restarted hoping that should clear up the shot.

  Now, any use of apt dpkg or apt - get comes up with an error message saying to run ' dpkg--configure - a "which I did and ends up in the same time.

  Help? Caesar.

  Download Firefox full installation for all systems and languages {web link}

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• Portege R600-U10 - error of Wireless Manager V6

  Hi all

  I used the Wireless manager V5 and had problems whenever the computer went into Hibernation. I had to reboot the computer, every time the wireless connection was carried out. It wouldn't reconnect.

  Someone told me that this problem has been resolved with the V6 so I downloaded the latest version and installed it.
  I get the cannor run more error below.
  Wireless Manager has encountered an error and will be closed... etc...

  Can I have an option or should I return to V5 and continue with the problem of hibernation?

  Hello

  What operating system you have and where you have downloaded the new software Wireless Manager?

  Did you remove the old version before installing a new?
  I recommend a new facility so remove all the Wireless Manager software that you have and you restart your laptop. Then run CCleaner which is a freeware for registry cleaning tool and restart. Now install the latest version of Wireless Manager.

  It's working now?

• Portege R700 Toshiba Wireless Manager

  Hi, I'm having a LOT of problems with my 3G connection via the Toshiba Wireless Manager. I have Windows 7 and version of the Wireless Manager program is CXP-901-4396/41 R3M03.
  The main problems are:
  -connection is failing all the time: it is connected, 5 minutes after it disconnects, and I have to log in again. Sometimes, I need to restart to be able to reconnect
  -very often, when you are connected, the BLUE SCREEN appears. crash the computer!

  This only happens when the Wireless Manager is connected. Without it, the PC work 100%!

  Help, please.

  SPM

  Hey,.

  I Don t Portege R700 in front of me but it's perhaps useful to s when you reinstall the Wireless Manager driver and 3 G. Before doing this, check if the latest version is available on the Web from Toshiba site, otherwise try to reinstall the same drivers.

  I hope it works :)

• Tecra R10 - 10W PCI configuration simple controller-Wireless manager

  I have a Toshiba Tecra R10 - 10W. I installed win7 and in Device Manager, it cannot find the driver for "PCI configuration simple controller.

  Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  Perhaps these two errors are connected.

  Thank you

  Hello

  I think you need the driver Intel AMT controller (Intel Active Management Technology).

  As far as I know, you can download this driver Toshiba driver European page or the page of the Intel driver.
  In this case, you will need to search for Intel Management Engine Interface driver

  > Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  WLan is not 3G use Fn + F8 to toggle the WiFi, Bluetooth and 3G.
  I think you have to press this combination of button several times to get the right setting

  Welcome them

• Latest Toshiba 3 G drivers & Wireless Manager do not work in Windows 7?

  Hi all

  I've installed, uninstalled, and reinstalled the latest Toshiba 3 G drivers and Toshiba Wireless Manager software for my netbook NB200-123, and they do not seem to work in Windows 7.

  When I start the software Toshiba Wireless Manager now (version 6.3.1.101), it starts for a split second, then Windows 7 will then appear a dialog box stating:

  "Wireless Manager has stopped working"

  (I used to have the old XP drivers work in part, if they had the problem you hibernation the netbook, the next time you open the software Toshiba Wireless Manager, it would freeze in the place where he says, 'opening pilot', and he would never come back)

  I currently have the following versions:
  Toshiba F3507g - (from Toshiba) Mobile broadband device version 4.54.7103.1, dated dated 26/06/2009
  Toshiba F3507g Mobile Broadband Network adapt - (from Ericsson) version 1.0.0.52 dated dated 29/07/2009

  If someone else has managed to get this working on their 123 NB200 with Windows 7? I wonder if I have a version of bad driver somewhere?

  I can't imagine that Toshiba would have rolled out this without testing, so I must have something misconfigured somewhere.

  Best
  Rob

  So far, there is no driver / WM for available for download Win7.
  The existing XP/Vista driver / WM may not work on Win7.

  SW for an update of Windows 7 will be released soon.