Wireless PC/printer problem

Similar Questions

• Have a PHotosmart C4795 wireless capable; printing problems

  I have a Verizon 4 G hotspot for the Internet and was able to print for a while, but now can't do wireless wireless. No problem to do with usb to the printer.

  Print a network Test Wireless in the network menu on the front panel.  That said, is it connected to your hotspot?

• HP PRO 200 MFP 276NW WIRELESS DIRECT PRINTING PROBLEM

  I JUST BOUGHT AN HP LASERJET PRO 200 276NW COLOR MFP PRINTER AND I DISCOVERED THAT I CAN'T PRINT DIRECTLY FROM MY LAPTOP. MY LAPTOP HAS A WIRELESS FUNCTION. HOWEVER I WAS ABLE TO PRINT FROM MY PHONE OF ZR SONY XPERIA. I TRIED TO REINSTALL ON MY LAPTOP SEVERAL TIMES BUT WITHOUT SUCCESS. HE ALWAYS SHOWS QUESTION SYMBOL ON PART OF TNE COMPUTER WI - FI.

  SECOND, THE PRINTER USUALLY MAKE NOISE WHEN PRINTING. IS THIS NORMAL?

  FINALLY. IS THERE ANY HP DESIGNATED SOFTWARE FOR PHONES TO WIRELESS CONNECTION WITH HP RINTERS TO RUN NORMAL PRINT JOBS?

  ACTUALLY, I BOUGHT THIS PRINTER DUE TO THE WIRELESS FUNCTION. USE THE WINDOWS OPERATING SYSTEM 7.

  I NEED HELP URGENT

  Thank you

  Thank you very much. I got on the question and my printer works perfectly. Your comment encouraged me to go further by performing for the solution sites from the center of the HP wireless printer and finally I found the solution. For the benefit of third parties. I uninstalled the software from my computer and started again.  I then followed the procedure listed in the HP Center /HP wireless wireless direct print page.

  Thank you

  OLAAT

• HP Office Jet 6000 wireless duplex printing problem

  (Note: all printers updates have been made)

  Printer works great as duplex, however:

  I try to Print Duplex (1/2 letter size pages - portrait booklet with the paper size of 8.5 "x 5.5" ).

  When I go to print I select the paper size for brochure (predefined size as shown above), however deselects the duplex option and manual is the only option.

  If I reselect Duplex then the size of the paper goes back to 8 1/2 "x 11".

  It's normal for duplex printing on non-standard paper?

  I know I can do it manually by printing one side at the time, but it defeats the purpose.

  Thanks in advance for any answers/ideas.

  blperry2001, I responded earlier to a similar post here (http://goo.gl/tcbiM) to explain why some paper sizes are not able to print.

  A list of most of the formats accepted for our printers can be found here (http://goo.gl/Bwv10), although according to their use some sizes may not be supported.

  I hope this helps!

• Mac Book Pro and HP Envy 110F wireless printing problems

  I got my Mac book Pro for Christmas 2013 and initially had no problem printing wireless to my HP Envy 110F, but for some reason, I keep getting problems with printing to the envy of 110. We don't have printing problems with our Ipad for this printer.

  I can connect the printer to my Mac book Pro by putting 192.168.1.72 IP address in a web browser, but I get on the symbol bit offline when I print the urge. Last night I reinstalled the printer to print wireless on my mac pro book using a printer cable, which then worked well, but today the same problem reappeared.

  I'm starting to think that the problem may have started with the latest version of the update of the operating system to the Mavericks 10.9.4.

  All thoughts welcome.

  Hi @UKCheshire

  Since you are able to print from the iPad to the wireless printer, I suspect you have to something. I think that the question has something to do with the communication between the printer and the computer and not between the printer and the router. Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X.

  If the problem persists, do not give up hope, let me know and we will work through it together.

• Printing problems with my printer Epson Stylus NX510 wireless.

  original title: Wireless printer issues...

  Help!  My router died and I work from a Home Office, so I use a wireless on loan from my ISP... it is a temporary solution until they can get out of my house and install a new router. My internet is fine, however, my printer/scanner/copier wireless wouldn't work. So........ I uninstalled and installed using the new wireless 'name' to save it. It allows to copy, but not print from my computer. The computer recognizes it but it says it is offline connection and guard my documents in what. In addition, my Epson Stylus NX510 printer still displays a page with my ink level and tells me that it is printing this page appears but does not read my ink level and it says that my printer is ready to print. My wifi lite is on the printer...

  any suggestions?

  Thank you!

  Jodi

  Hello

  1. What is the operating system installed on your computer?

  2. What is the exact error message you are getting?

  Please follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Wireless printing problem-Documents stuck in print queue

  Original title: printing problem

  Until yesterday, I was able to print OK using Windows XP and a pro HP Officejet 8500 wireless.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  Although some printers wireless HP install a driver having a box in the "Parameters of the Port" tab that says always "print to this same device if its IP address changes" it is best to configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• iPhone5 with Officejet 655 wireless printing problem has

  IPhone 5 won't print wirelessly on Officehet 6500 a. done before, but since the update will not be

  Hello

  Sorry to hear that you are experiencing printing problems.

  You use the functions AirPrint and ePrint? The phone is able to see the printer?

  Things to check would be that the printer and the telephone are always connected to the same wifi network and that there has been no wifi password.

• problem with wireless portable printer

  Windows 8

  HP Laserjet 200 color M251

  I had this set up works correctly (I forgot how I did it), until we have had an interruption in the internet service last night.  Today, the display on the printer itself says its connected.  My laptop displays this PCL6 printer class driver.  I can't print anything.  Everytime I try, it is said that my impression is offline.  I checked the printer itself, and it says it is connected and online.

  Can someone please?

  Hey @Bionic1 ,

  Welcome to the HP Forums!

  I understand that you are having printing problem with your printer LaserJet M251.

  Can you tell me what operating system you are using? What version of Windows you are using, click here: Windows operating system am I running?

  You should be able to see the IP address of the printer by pressing the button on the main screen of the printer wireless. This should be at the top of the screen, then left to right. Once you have the IP address (should be something like 192.168.1.2), type it into the web browser address bar (as you would for a Web site) and try to load the page. This should open an information page for your printer, and is called a built-in Web server.

  If this page does not load, there is no wireless communication. If it does, it indicates that the wireless connection is probably fine, but unfortunately this is not always the case.

  Try powercycling your router to update the communication. Do this by unplugging the power cord from the router and leave it unplugged for at least 45 seconds. Plug back in and wait 1-2 minutes so he can come back online. At this point, try to print.

  If this fails, try to add the printer with the full functionality driver instead of the class driver. Open devices and printers, and right-click on the printer. You should have the ability to delete or remove the printer. Once it's done download and run this installation program: color HP LaserJet Pro 200 M251 series full feature software and drivers.

  Let me know if this helps.

• Printing problems wireless with Windows 7 Home Premium

  Previously, I had Window Vista downloaded on my laptop and had NO problem printing wireless. Now I have Windows 7 Home Premium. I have a modem from my phone company, a wireless router and a Photosmart All printer (C4795).  The same one I had with Vista.  I just can't get anything to print UNLESS I connect a USB cable from my laptop to my printer (very frustrating). I'm not completely PC illiterate, but not very clever of them either. I uninstalled and reinstall the printer, the router and the modem and that did not help. I had the company of phone on the phone for an hour last night and they could not help and saw nothing wrong with my set up. I need an answer "simply stated and clear" what I have to do. I have a group RESIDENTIAL network set up on my computer, but have not set upt the other computers at home (a laptop) with the network home for the moment. I wanted to get a computer is working correctly before moving forward. The internet connection to the HOMEGROUP network seems to be well. All devices are listed and look good, but I can not just wireless printer that's why I brought the first wireless printer.

  Help?

  Headed home, this is my desktop PC. Hoping answers tomorrow or to my email. * E-mail address is removed from the privacy *

  Hello

  1. what happens when you try to print?

  The printer is compatible with windows 7 as per this link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Photosmart%20C4795%20All-in-One%20Printer&v=HP&uid=Q8382A&l=en-US&pf=0&pi=0&s=Photosmart%20All%20in%20ONE%20Printer%20C4795&os=32-bit

  I suggest you follow the steps in this article.

  Find and install the printer in Windows 7 drivers: http://windows.microsoft.com/is-IS/windows7/Find-and-install-printer-drivers

  Install a printer: http://windows.microsoft.com/en-us/windows7/Install-a-printer

  Refer.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/is-IS/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information:

  The product does not work properly after reinstalling on a network and upgrading Windows Vista to Windows 7

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01918192&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3940574

  Wireless printing Center

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

  I hope this helps.

• HP 3050 j610: wireless printing problem withhp3050j610a all-in-one.

  I have been scanning and printing documents regularly. one day during the analysis of a doc a message flashed on the computer screen that there was a communication problem between the computer and all in a printer.it persists over and over again.

  He had no problem with impression then.

  as advised by the media, I downloaded a link . http://169.254.152.74 and saved as a favorite and he used every time I had to analyze.

  yesterday it stopped opening.

  Contact support who advised me to support responsible link.down to print and scan doctor and solved the problem of scanning and it turned into a printing problem. print a test page, it does not print a document.

  After encountering conflict driver down load of troubleshooting, I was informed to uninstall the drivers and the use of the CD that came with the product.i did. without success. scanning is ok.

  However, questions have been confirmed to have been solved by the doctor tool but is not printing. not even the test page. There is no abras to low ink.

  I double clicked on the printer icon when and as advised by the tools, without result.

  I use a laptop sony vaio e series with win7 os.

  Please help me solve the problem.

  Hello @casia15 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems printing.  I would try to help!

  First of all, I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Officejet 4500 wireless printing problem

  We have a laptop HP Pavilion g7, which has always worked a lot with our wireless 4500 printer.  Now the computer says the printer is offline.  The wireless button is blue.  Hard computer connected to the printer shows that it is online.  What else am I missing?  Can anyone help?

  We have removed one then reinstalled the HP printing software and it works again. Thanks a bunch

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• HP7500: printing problems

  Windows 7

  HP7500

  Wireless printing

  Can print PC test page, but not Word document print.  I have this intermittent problem and sometimes after printing test page for the PC, the document will be printed.  Sometimes I have to run print and Scan doctor. This time has solved the problem.  Printing and scanning doctor said nothing wrong and print a test ok page. Still no Word document printing.

  Hello @Eric4and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I would like to start by running the following two uninstall process:

  The problems that the programs cannot be installed or uninstalled

  Uninstalling the printer software

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!