wireless printers

Similar Questions

• AirPrint not seeing HP wireless printers

  After the upgrade to iOS 9.x would not print my iPad and iPhone on the network home.  I uninstalled printers one re-installed. I rebooted the router and printers. Always Airprint could not locate the HP printers. Help appreciated

  Hello GT - LR.

  I understand that you are no longer able to print your wireless printers are connected to your home network. The steps below can help to restore your ability to print successfully from your iOS devices involved printers.
  

  Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."

  • On your iPhone, iPad or iPod touch, check that your device uses the latest available IOS and the app that you print from is up to date.
  • On your Mac, use software update to update the Mac operating system and the applications that you have purchased from the Mac App Store.
  • Check with the manufacturer of your printer to see if the firmware updates are available for your printer model.
  • You can connect an AirPrint device to your network, either by bypass surgery or a direct connection to your Wi - Fi network.
  • AirPrint devices connected to the USB port on the Apple AirPort base station or Time Capsule AirPort use AirPrint. If your printer includes AirPrint, connect it directly to your Wi - Fi network or Ethernet LAN port on your Base Station to print wireless.
  • After turning on your printer, wait a few moments before trying to print. Some printers may take a minute or two after power to join your network.

  On AirPrint
  https://support.Apple.com/en-us/HT201311

  See you soon

• Print on my windows mini wireless printers

  I have a home network Windows with 3 wireless printers. Is it possible to print from my iPad Mini on these printers? I am a newbie to iOS.

  If they support AirPrint. See these two links supported help: Topic AirPrint - Apple supportand print from your iPhone, iPad or iPod touch - Apple Support

  -AJ

• I reset my router, now my two wireless printers will not print wireless.

  I reset my router and now none of my HP printers can print wireless.  They print with a USB key, but the installation program for the Wireless does not detect my wireless network.   I use an iMac and Airport extreme router.

  I have a different brand printer that works wirelessly now.  I don't understand why HP printers attached to the network.  Printers are c4780 and 4500.

  I tried your solution but still could not solve the problem.  I called HP support.  After a few minutes they determined that since it was an old printer and I recently updated my software on the computer and did a upgrade to the router, when I reset the router was not compatible with my printer.  They also suggested that I try with an old computer,.

  So, I ordered a HP OJ8600 at a great price and will move the printer on another computer.

  So Bravo are so your information, even if it was my fault for failing to provide more complete information, and given that the printer works somewhere else and I have a compatible printer on the way, I consider that this problem is solved.

  Thank you very much for your help.  I appreciate it.

• Wireless printers turns gray again and again.

  I have three Windows 7 computers and two wireless all-in-one (a HP 8500 A909g and an old HP 7400) connected to our network. Unpredictable, one or two printers become gray on one or more computers, forcing me to delete all print jobs, remove the device in devices and printers, and then "add a printer" back again. Weeks may pass without incident, then it can happen a few times a week. I can't show everything what I do which could be a precursor. Windows 7 I've read dozens of books talk about nothing like. My web searches have been unsuccessful. What I might try?

  Alice Abusmus

  E-mail address is removed from the privacy *.

  This is due to the printer's IP address when changing assigned by DHCP and name resolution issues.  When you reinstall the printer setup is and reset the driver.
  The best solution is to assign the printer a static IP address.  (I prefer done systematically with network printers that these types of issues are too often otherwise).

  Depending on your level of technical expertise, you may need help doing so, but here's some general information:
  -Depending on the printer, this can be done on the Panel of the printer or via a browser interface.  Consult the documentation for the printer if necessary.
  -Addresses must be in the correct subnet and outside the range of the router DHCP.
  -Printer IP addresses must be set in the driver on each workstation.

• VM XP not connect wirelessly with the home network or wireless printers

  I'll start with the problem and ask anyone and I'll fill in what information (drivers, programs, etc.) are required to complete the problem and I hope that we will find a solution together!

  I have Windows 7 64-bit (professional course) and it was installed with the Office of the virtual XP computer 2 years ago. It runs in a SONY laptop VAIO VPCS111FM, with core i5 model. Seagate 500 GB HARD drive. 2.5 GHz, 4.0 GB of RAM.

  The problem is that all the other computers I have (running XP, Mac, iPad, etc.) are all able to connect wireless internet and printing using the home router (Mac Airport Express) (yes I know right way was the other way around, but too late, too much money and time spent in the wrong direction). Windows 7 of course works in the laptop for two HP printers wireless, but not the XP Virtual Machine. Nothing can be printed off the coast of the XP to every CV (6500 has more (too advanced in any case) or the printer HP Officejet 8500 wireless.

  Of course, you know why I'm here. Help SONY expired, Best Buy, which has installed the purchase and we admit, Windows 7 Professional 64 bit and also installed the Office XP (it's their very very first download this system, because I know they spent over an hour on the phone with Microsoft (I had to prove that I was, the owner, before they would talk to Best Buy)) , installation and there is 2 years back and they always say nothing is wrong and we will charge for the search under the name of all the guarantees and free assistance have expired. Of course the last wrinkle is that Microsoft is now in charge me $100 just to answer the question of why his doesn't like his "XP" and even if its share of Windows 7! its still "XP" and gets load!

  HP was great and discovered that the IP Code starts by (if all goes well to say don't compromise the first three digits protection WEP ISP we have 192 for the XP VM, while everything (including MAC and iPad) everything starts with...) 10.! and have done all these years, we have had the system wireless installed (since 2004).

  Can someone help me get my XP connected wireless? What's wrong? What is missing?

  Furthermore, the Ethernet card is this green icon and no question mark or anything in the XP VM except 5 weird listed as "other devices." In Device Manager is NICs: Intel 21140 - based PCI Fast Ethernet Adapter (generic). In the section "Other devices" are: 5 copies of 'Virtual PC intégration Device' air conditioned and have question marks still under "Properies" and "Device status" all say "this device is working properly" no clue as to why mark her quesiton showing! Sequel to "Troubleshooting" only me ends with "contact the manufacturer or installer etc., which means significant costs because there is no more free ride or ensure the installation after 2 years!

  I hope this helps everyone!

  If I install a program that requires the Internet it can NOT find the internet on its own! (i.e. put HP program or other small program that I tried to install my XP needs the 'internet' else to register before using it!).

  BUT THANKS to YOU all! While searching for information complete this application I hit the tab of "USB" top XP VM and unknown device (my DVD?) and HP 8500 printer could be installed via "USB" so at least for the FIRST TIME in 2 years they are printing and working on the USB cable! This isn't a separate DVD, but the one inside the laptop. Sometimes, it works on the XP desktop, most of the time I navigate the DVD disk and force the autorun from running by using "RUN" in the start menu. I still don't know what happens if I spell (or close safely) the peripheral attached USB (printer) or if it will tie next time without putting in place (he has created four more settings of printer/fax machine (series 2!) on my list of printers.) I don't know what is happening, but its nice to see a page out of the "Notepad"or "wordpad" for the first time in two years! ".

  Now, all I need is to happen wireless!

  Thanks to all who read this far! Great thanks to all those who wish to help!

  Hello

  You can display the query in the link provided for assistance:
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• can I print from a laptop if wireless printers hooked to office without card wierless?

  I have my printer HP Deskjet hooked to my office, is there a way I can print from my laptop without wireless card?

  Thank you, you are welcome.

  Frank

• Is this possible? Two wireless printers identical (HP3050) connected to the laptop even?

  Hello

  I just bought a HP 3050 all-in-one and wishes to buy a home. Before I do, I was wondering if it was possible to connect two same printer on different wireless networks.

  Thank you

  Andy

  Ok. Then, you need to use the CD on the desktop of your wife and the daughter cell phone to set up.

  With you, laptop computer home and work when you want to print, you just select the printer you want to use, depending on your location.

  Best regards

  ERICO

• Photosmart printer HP CN245B GONE all-in-one e-B110a wireless printers and devices?

  
  

  Hello Mitramonday, here is the most recent link to the full feature software/driver package for your printer.

  There are a few updates so that you can download and install.

  You will need to uninstall the current version of your front driver/software will install the software and drivers downloaded.

• Win 10 analysis of problem with Officejet Pro 8500 A909g wireless printers

  I have the same problem, scanning works very well since long I do not use the HP Solution Center, it worked fine on W7, but after the upgrade of the W10 (YES I installed the new feature full support for W10)-Scanner is still not functional with the HP solution Center. I tried all solutions with no joy. HP scanner doctor says that it cannot find HP Scan, Solution Center, said another program uses the sanner. ?? Frustrated!

  Hello

  1. This same CCC folder, run Uninstall_L4.bat) press enter once if only black dialogue is shown) and allow to fill any screen uninsitall (there will be multiple screens to uninstall one after the other.
  2. Restart the PC when requested to do so.
  3. Right click the button start and select programs and features, there is no request of HP left.
  4. Locate the following folders, and remove all remaining files HP or Hewlett-Packard :
     
     • C:\Program Files
     • C:\Program Files\Common Files
     • C:\Program Files (x 86)
     • C:\Program Files (x 86) \Common Files
     • C:\Users\(your user name) \AppData\Roaming
     • C:\Users\(your user name) \AppData\Local
     • C:\ProgramData
  5. Navigate to C:\Windows and delete the pritner folder, it should be identical to hpoj8500A909g
  6. Always in C:\Windows, find the twain_32 folder and rename it to twain_32.OLD
  7. Right click the button start and click on run, type temp in the shown dialog box and press OK, then delete all the contents of the Temp folder (no worries, these are all temporary files that can be saefly removed)
  8. Right click the button start and click on run, type folder in the shown dialog box and press OK, then delete all the contents of the Temp folder (no worries, these are all temporary files that can be saefly deleted).
  9. Save the insatller depending on the Office you'd, do not reinstall it again that I just send you additional last private preliminary step to reinstall the HP software:
     http://ftp.HP.com/pub/softlib/software13/COL31041/MP-110033-3/OJ_AIO_P8500_A909_Full_Win_WW_140_408-5.exe
  10. Look for a message private to me, if you are unfamilier with works of how private e-mail, you will see a notification message in the top right envelope icon from the page to the screen of the forum.

  Kind regards

  Shlomi

• Adding printers Wireless Solution Center

  I am running Win7 and after restarting my wireless network, wireless (Photosmart C7250 Photosmart Premium C410a) printers have been added in windows using the window adds a printer.  Now, the HP Solution Center does not see wireless printers.  Is there an easy way to add them to the center of solution since they are on the network (with a different IPv4 address of initial installation)?

  Look in your Start menu all programs for the HP folder with printer software. You should see an option "add a printer". To avoid this problem in the future I would set a static ip address for the printer.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/static-IP-address/TD-p/1663045

• HP Laserjet P1102W wireless connection problem

  I have a P1102W which worked very well up to what it wasn't wireless.  I use an AT & T Uverse 2Wire router and Windows Vista.  I have not changed anything, and one day the network would not recognize the wireless printer.  I've turned off (unplugged) everything and turned on the back without success. I uninstalled and tried to reinstall the printer and have just received a message that the network could not connect to the printer.  The printer works when it is connected with a cable, but the blue wireless light just blinks and then turns off - indicating that there are no wireless signal.  All other devices and wireless printers on this network work very well.  HP support was no help, because the warranty had expired 2 DAYS ago!  Any help would be greatly appreciated!

  Hi kadmiral,

  Follow the steps below.

  1 uninstall the printer to the computer using Add/Remove programs in the control panel.

  2. download the software and the driver for your operating system from the link below.

  HP LaserJet Pro P1102w printer drivers

  3. follow step 3: connect to the wireless network - second method: Standard connecting with a USB cable

  If your wireless router does not support Router Setup (WPS), you can use this method to set up the product on a wireless network. With the help of a cable USB to transfer parameters facilitates establishing a Wi - Fi connection. Once the installation is complete, remove the USB cable.

• OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

  I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

  I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

  I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

  Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

  However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

  The Win7 PC is plugged into the router.
  The printer wireless to the router.

  ipconfig on the pc gives Ethernet card details below.

  So basically I have no idea what I'm doing...!

  ==============

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
  IPv4 address...: 10.0.0.249
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.2.

  Router config.

  

  Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

  It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

  I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

  Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

  I'll try to report in the next few weeks an update about the stability of connection network printers.

  UPDATED: May 23, 2016

  And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days

• OfficeJet Pro 8625: HP8625 sleep mode/wireless network connectivity

  I recently bought an OfficeJet Pro 8625 and it worked fine for a few days, with everyone in the House, being able to print wireless connection network (Verizon FIOS via an Airport base station).  However, now it won't keep (or restore) a Wi - Fi connection after going to sleep.

  I can get the printer to work, if I turn it works, then immediately print (but only one machine... If I need to print from two different computers, I have to restart again to use the second computer).

  This is the case for all computers in my house - using several OS X (El Capitan, Mavericks and Snow Leopard) and the other with Windows 10.  I tried the troubleshooting tips that I could locate, and the firmware is up to date.

  I should be able to send a document to the printer from anywhere in the House, from any computer, without walking to the printer and restart it first.  A network printer should be sprained able himself, reconnect to the wifi and print jobs sent to it, but mine doesn't.

  How can I solve this problem?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php and powerful Scan at the end.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• DeskJet 2546 b: Wireless print job stays in queue and poster printer offline after the upgrade to Windows 10

  I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.

  My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.

  Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.

  I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.

  

  But it's just a solution and not a solution.

  Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.

  Here is the step by step. Your printer must already be connected to your network (solid blue on printer).

  Step 1: Make sure your printer uses a manual IP address

  (1) to obtain the IP address of your printer:

  • If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
  • If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.

  (2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)

  Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.

  (3) since the network tab or section, look for a manual IP address configuration.

  

  (4) suggest an IP address or type in a new.  I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.

  5) click apply and close the web page of the printer.

  Step 2: Make the print driver using the manual IP address of the printer

  Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...

  

  1) click on the ports tab.

  (2) add the Port.

  (3) click on after the first screen, and then click new port type.

  (4) enter the IP address of the printer.

  (5) next.

  (6) select the new port.

  7) click OK.

  You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.

  Step 3: Remove print devices and install a new one.

  Need to do this to get the software back HP synchronized so you can scan.

  (1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.

  (2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).

  (3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.

  4) return to the printers and devices window and open the properties of the printer again for your printer icon.

  5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.

  (6) you have now two print devices in the window (again), but now everything should work.

  These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.