Wireless XP SP3 problems

Similar Questions

• Have a PHotosmart C4795 wireless capable; printing problems

  I have a Verizon 4 G hotspot for the Internet and was able to print for a while, but now can't do wireless wireless. No problem to do with usb to the printer.

  Print a network Test Wireless in the network menu on the front panel.  That said, is it connected to your hotspot?

• Wireless network connection problem

  Nice day

  I have a wireless network connection problem and I ask for help to resolve.
  What surprises me that this problem appeared suddenly, I used to connect to the WIFI correctly but two days ago my laptop could not connect to the WIFI and more.

  Other devices and computers connect with success so I think that the problem in my laptop.
  I don't have any changes on my laptop or windows, antivirus, drivers... updates or installed new software.
  Troubleshooting of Windows detected 'router or access point issues '.
  -Reset the router does not resolve the problem
  -Network adapter is enabled.
  -State of wireless card "working properly" and "update".

  I read a solution on this site, which was to change the properties of the wireless adapter, but the changes mentioned does not appear in the pilot of my laptop...

  * My laptop info. :
  DELL INSPIRON 3521
  Windows 7-64 bit
  Dell WIreless 1703 802.11b/g/n(5.2GHz)

  Sorry for this long to make, I appreciated all the help.
  Thanks in advance.

  Hello

  Have you tried to reset your laptop to a time before this issue started with a Windows 7 Restore Point?  If it is a parameter change or software this restore point can help solve what is at the origin of the problem.

  I'd also, of course, when you are resetting the router, to make sure that you let it sit for at least 30 seconds to a minute before plugging power back in.  You may need to do a few times to clear his memory to be able to connect.

  In addition, have updated the drivers for the wireless card?  What version of driver currently installed in the system?  You can consult our support site, enter your serial number and click on drivers & Downloads to find the driver for your wireless card.

  Finally, have you tried to empty the wireless profiles that are currently stored in your system?   If you delete the profile current wireless (which is to control your connection to the router), reboot your system, and try to reconnect Windows will rebuild the profile and hopefully allow you to log in again.

  I would like to know if any of this helps.  To help resolve this more effectively please click on my user name Dell Todd and send me a private message with the Number of Dell Service from your system.  Please keep all troubleshooting and discussions on this thread open so that others can find the information they need to solve their problems.

  Todd

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Wireless network connection problems

  I have problems to stay connected to my wireless router.  There are 3 laptops and 2 workstations connected, but my laptop does not seem to disconnect every time my computer sleeps or is closed.  I have to go through this process to solve the problem in which the connection is immediately restored, but then disconnected and connected once again. I tried to remove the connection & restores and troubleshooting with the router, but nothing seems to solve the problem. Other computers never have this problem.  My laptop is fairly new, and I'm quite puzzled as to why he's in trouble.

  Hello

  To provide the proper resolution, I would need more information on your side.

  What is the number and the model of the laptop?

  Windows can be disable your network adapter to save power. You can try to disable the power saving option in the network adapter properties

  I suggest you try the steps to disable power saving option. Check if it helps.

  a. open network connections by clicking the Start button, and then clicking Control Panel.

  (b) in the Search box, type adapterand then, under network and sharing Center, click on view network connections.

  c. right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click the Networking taband then click on configures.

  e. click on the power management , clear the checkbox allow the computer to turn off this device to save power tab and then click on OK.

  See the article for more information.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite P15-8409, Atheros wireless network adapter problem

  Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:

  The device cannot find enough free resources that it can use (code 12)

  The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.

  At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.

  I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.

  all the best,

  James

  BIOS version is installed on your machine? And you have you recently changed some hardware etc...?

  I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.

  Maybe the exchange of cards should solve this problem?

  Welcome them

• Cannot find option on the settings wpa wireless with sp3 on windows xp

  I have a toshiba satellite pro that I adapted a new h/d, which came with xp pro with sp3.

  I did all the updates and the system of microsoft verification says its perfectly up-to-date, but I can't select the option to choose wpa - psk for my wireless settings.

  Before the old h/d failed I had to download sp3 from microsoft to allow this option that we had a new router that uses only wpa - psk and it worked fine, since the new operating system has been installed it will not allow it.

  I found a download of microsoft specificallyt for wpa psk, but when trying to install windows indicates the update is older than the one already installed sp1, any ideas?

  Hi,

  
  Please refer to the below taken in charge provided Microsoft article and check if the steps help you solve the problem.
  http://support.Microsoft.com/kb/870702

• HP Pavilion 15-E015TX: wireless bluetooth driver problem

  I had updated for windows 10 per year, since a week asked problem with my bluetooth driver. Wireless Operating Sysytem is not able to detect the driver and the blutooth is not fuctioning

  Hi @dr_impana86,

  Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

  I understand that you updated to Windows 10 a year ago. Last week, you have started to have a problem with the Bluetooth. When I checked the page software and drivers for your laptop, I noticed that Windows 10 is not listed. This tells us that HP has not tested Windows 10 on this model, and the result is unknown.  Here is a link to HP computers - use of devices Bluetooth (Windows 10: 8). Alternatively, you can try to reset the Bluetooth. » :

  Step 1. Go to Device Manager and click on Bluetooth to expand the list
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM and LPT).
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  While you're in the right click on your Bluetooth device Device Manager, and then select Properties

  Click the power management tab.
  If allow this computer to turn off this device to save power is checked, please delete, then click on apply.

  If you are unable to connect to a Bluetooth device, try the following:
  1. type of step' change device' in Cortana
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to Cortana and type "services.msc" and press enter
  Step 2: Now find 'Bluetooth Support Service' and double click on it (under the general tab you can change startup automatically if you wish)
  Step 3: Now click on Connect tab and type "Local Service" without the quotes, if it is not already displayed.
  Step 4: Now remove any authorization of passwords the password field blank
  Step 5: Click on apply in the lower left corner.
  Step 6: Click on the Recovery tab, and make sure it is set to restart the service after the failure of the first and the second and change it if necessary and click on apply.  If you still have a problem, you can try installing the driver in compatibility mode Windows 8.1. Compatibility mode (from windows10forums). If it worked before you can also try a restore to before it's product.  Computers HP - using Microsoft System Restore (Windows, 10, 8) Please keep me informed of your progress.

  If this helped you to solve the problem, click on "accept as Solution" told the post. "To show that you 'like', or are grateful for my post, please click on the" ""Twww.Mountainview.rsb.qc.ca Up ' below. If there is anything else I can do to help, please don't forget to let me know!

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• Satellite L50-B-07U-wireless Internet connection problems

  I have a laptop L50B07U.

  It says my wireless connection is on and I am connected yet none of my programs or search engine can connect.

  Said its impossible to access the network... help!

  Hi JoeyKangaroo

  Do you also have problems connecting to the internet using the connection to the LAN (network cable)?

  By the way: try to disable the WLan (encryption WPA/WPA2) security in the settings of your WiFi router and connect the laptop to open (unsecured) wireless LANs.
  Then check if you would be able to use internet or not...

  But please don't get me wrong: you must disable the WiFi encryption only for testing purposes! The wireless network must be always well attached!

• Master repository HPDM4.6 SP3 - problem

  Hello

  I have a problem with the implementation of master repository in HPDM 4.6 SP3 on Windows Server R2 2012.
  First I put basic information in the management of repository and I did a test that completed successfully (attachment #1).

  After awhile, I got an error of fixing #2.

  Then, I tried to view the contents of the master repository and I had a #3 fixing error.

  I tried to send two tasks to the test device - both failed ultimately (attachments #4 and #5).

  I think I checked everything starting from the turn of the firewall, open all ports, resettlement HPDM and install it on another machine.

  Any ideas how can I do Master repository works properly?

  Yes, as my co-woker mentioned above, your FTP repository has not been defined according to the configuration of your RCM.

  You must set the repository FTP at ftp: / / < IP > / HPDM based on the configuration of your RCM.

  Note: The 'Test' button will only check if the IP and port is available, which can mislead you when given the 'success '. We are looking to improve it in the next version.

• Satellite L500-1WG - wireless on battery problems

  Wireless connections work fine on the main power supply, but often is de-energized when running on battery power.

  I tested this several times and confirmed that this happens during the passage of the main battery.

  BR,
  Magnus

  Hello

  I think that this problem occurs due to the settings in the Windows 7 power management.
  There is an option that allows to power without danger when the laptop is running on battery.

  Change or disable this option for WLan card.
  I think this should help you to solve this annoying problem

  Welcome them

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Satellite C660 - 2 7 - wireless network card problem or not?

  A couple of days, that I dropped my laptop maybe 3-5 inches above the ground and he hit the brick of charger with a small thunk. I have use it again until the next day and since then, internet connection has been patchy, at best, for the most part drops every 3-4 minutes (he always considers it is connected for awhile, but no page doesn't load and Skype shows no connection) and slow when you are connected.

  Running the tool to diagnose windows usually resets the wireless network adapter, also tells me reset the router and will often complain of DNS...connectivity/nameservers/something of this type, usually that they one after another, what is the problem is not really clear. This problem only occurs on the floor and everything seems fine down (the router is downstairs, but is not really further and is located next to the open staircase), but as it was only a few days, this could just be lucky and not relevant. Also the internet connection (ISP, BT terrible btw) has been terrible lately in general, have been on the phone to BT about it several times to complain with no improvement (because they have not done anything).

  Thus, it + pourrait + just to be the internet connection, I really only has not let down any high rise (it was a landslide while reaching to position it on the ground), he is poor at the moment and reset the router seems to have an effect, but does then reset the wireless network adapter (temporarily) and timing is a bit co accessory. I think that this is probably the Ondaaah just lost, but I'm not an expert or a techie and this is my first windows laptop to... Well, never! And I could be totally off. It is also been connected all the time that I was typing without problem, but I got it with the keyboard tilted up slightly to rest.

  Can anyone help? I don't want to get it looked at if nothing is wrong (especially if it's just BT once again, I'm about to give them up for another access provider), but I don't want to leave if it needs fixing and find it does any connect. Even a "Yes, it could be that" or "no, it won't be this" kind of reply would help ^^

  * Edit I ran the Toshiba assist, diagnostic tools and it passed all the tests by default, but he will try next time stops internet connection (probably soon)

  Post edited by: idleRAT

  What is with the local network connection? Have you noticed similar problems link your laptop by using the LAN connection?
  >... but will try next time stops internet connection (probably soon)
  Test it and send feedback.

  At least, you can install original recovery image and test the feature with the factory settings.

• New problem z50 - 75 wireless? Startup problem

  Hello

  I had an another hp laptop which had a problems but the know-how could not fix it so they give money and I brought another Hp 4 days but then she had to be exchanged because of defective. Currys and PCWORLD even gave, but the problem kept pass. So I just paid the HP one and brought 3 days LENOVO Z50-75 it y a. the first Hp laptop, I had, had dns clients warnings in Event Viewer when you use wireless. Same thing on the new computer hp laptop. This problem still occurs in the LENOVO one too. These events started in Windows 10 for all laptops hp and lenovo. My computer laptop lenovo came with windows 10 in any case. So either it's a bug that should be fixed by a new update for the network adapter needs to be released. Computer laptop lenovo has Qualcomm Atheros the old hp laptop realtek the new computer hp laptop that was defective was and intel double wireless broadband and the same edition, DNS CLIENT EVENTS 1014 WARNINGS are still happening. This is definetley not my ISP fault because I replaced the router, more they found nothing on a week 2 diagnostics test on my internet. SO I just want to say lenovo that if there is a way you can fix this. Another thing is that after installation WIN10 threshold 2 on Lenovo Z50-75 when starting of the laptop it shows the logo screen once then black lenovo and then black screen again, then it boots. I have also all the latest updates. So if there is a way guys can fix that also. I'll post this in the microsoft forums too if they can help. Thank you

  Hi I managed to solve this problem by disabling the DNS CLIENT service, but always the startup problem also happens when I stop or restart the cirlce logo going arouns the shows as usual then flashes then closed restartsor and the same thing happens in the Welcome screen it flashes (black screen for a second), and goes after UPDATE of TH2