won't start: charger turned green as usual

Similar Questions

• Equium A60-155 won't start and turns off

  I have a celeron Toshiba EA60-155 355 / 40 GB / 512 MB of ram and for months has been very difficult to start. It takes up to 10 attempts to start properly, because it feeds normally but with a white screen. Once started it USUALLY works fine, but sometimes becomes empty when you use it. This happens randomly and not necessarily by doing anything CPU intensive.

  I would like any advice or solutions, as it's crazy of me and my family!

  Dave Marshall.

  Hello

  Not easy to say why it happens. You should first check if it s not a software problem.
  Try to update the display driver. If it doesn t help you recover unity with the Toshiba Recovery CD. After this procedure, all should work properly. But if the problem persists then I guess it's a hardware fault.
  In this case we need the help of service

• I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?

  Original title: the battery starting

  I have an Acer 1810tz-4008 and computer won't start battery.  New charged battery - what should I do?

  Hello

  Check with support from Acer.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ===================================

  Other information that might help:

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer won't start; 3 long beeps, the fan turns

  Hello

  I have a desktop HP equipped of Windows Vista that does not start correctly.  When I turn it on it looks like it is starting, I hear the fan, the computer will beep 3 times in a row (I would say long beeps) then stops and beeps 3 times in a row again.  Then nothing on the monitor, fan always running.  If I didn't get anything I think that the computer and the monitor's energy-saving.

  Before I turn it on the screen says no signal so I think the screen itself works.  I don't quite see the HP splash screen.  Pressing F8 during startup seems to do nothing.

  I created Vista backup discs (food?), but I don't think they are bootable.  Some back story: a few weeks ago, I tried to download Windows Live.  After installing the updates, I could never Live DL and the next day I got the blue screen of death.  I rebooted, you press F8 repeatedly and Windows started normally.  Although it worked fine for a few days I felt nervous that I did a restore of the system around October 31.  Everything seems to be ok for over a week but now I have this problem.  I thought to upgrade to Windows 7, but do not know what to do at this point.  I've never opened a tour - answers Google talk out of ram or certain types of error of keyboard Bios (3270 keyboard card).

  Help, please!  Sorry to be so long.  :-)

  Hello

  These beeps mean hardware problems so check with a real computer (not the leeks and pics store
  at a Best Buy or other department stores) or HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Sound beeps are error codes that describe a problem with your machine.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then refer here: If you can not start then check with the manufacturer of the system.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Desktop won't start. flashing green light

  I have a 1318NX Compaq Presario SR which will not start!  There is a green light flashing on the back of the power supply; which is normally green 110V AC is plugged into it.  I tried the trick of the Start button while not plugging the power cord... no help.  I also opened the case and carefully got rid of any power cord of all internal devices... the light turns green only when I pull the main power of the motherboard!

  I need to replace the motherboard?  Troubleshooting on hp.com site would indicate that the power supply is OK if the light is solid green.

  Thanks for your suggestions,

  Lou

  My wife's computer had the same problem several times. A solution I found that worked before was to unplug the power cable from motherboard and the power supply cable to the back of the PC and then connect the power cable and plug the motherboard power cable while holding down the power button. Scary, to say the least, but it worked, until one day I accidentally spilled the bad circuit breaker and then spend two hours trying the same solution with no luck and the Google search again. And here's what I found. It is the simpler solution even more cruel. It is simple and noninvasive and no matter how tech savvy you are. Take a blow dryer and turn it on to blow air at the rear of the power supply for a few minutes. When you see the light turn green, you're ready. It's worked for me after that it worked for a hundred others, maybe more. A look at the testimonials on this site: http://talk19.wordpress.com/2008/01/13/hp-m7088d-power-supply-led-blinks-green/. It's a shame that nothing like that appears on any site of HP. So don't waste your money on a new MoBo or PSU. All you need is dry hair of your wife.

• Satellite U400-14 b turns off and now it won't start

  Hello

  just got a new Satellite U400 this week.
  Worked perfectly the first days, and then last night, it just turns off and now it won't start.

  I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
  I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.

  Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.

  The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...

  help please...

  Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.

  If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

• Probook4540s: 87% charged battery, won't start not computer.

  87% charged battery, won't start not computer. When power plugged in and started it shows not charging. If I remove the power cable, stop immediately.

  There are several complete responses with the steps to follow, which I did. Finally a new battery of bouht and considers the motherboard bringing not at not charge. The sending of the stack of return for credit.  Will just have to use with the power supply.

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• MacBook Air 11 "2012 won't start

  My MacBook has been in place and become Finder does not always whenever I try to watch my files.

  So I decided to restart and now it won't start, the startup would always freeze in the middle of the progress bar.

  I tried:

  Repair/check disk + permissions - no problem

  Reset NVRAM memory - still does not start

  Reset SMC - still does not start

  I tried single - user drive is quite well

  Reinstalling OSX - cannot run due to 'this article is temporarily unavailable.

  And finally, the verbose mode and I am skeptical behind the text following code/orders:

  Dynamic code of I080211AWDLPeerManager::configure not support on this device

  I080211AWDLPeerManager::getVHtCapabilityIE cannot get the vht ret 2d capabilities

  EN1: enable successful "Promiscuous" mode

  en0: BSSID changed to XX

  Afree mode detailed of these commands would freeze too.

  I tried almost everything and I don't want to consider formatting my drive, which can also not let me install OSX for the above mentioned reason. So yes, all my options are gone. It's quite frustrating that came from nowhere and that my options are now extremely slim.

  To add my MacBook is no longer a guarantee and it doesn't have the AppleCare.

  I'd appreciate any help, thanks!

  Reinstall OS X without erasing the drive

  HD recovery start: restart the computer after the ring, press on and hold down the COMMAND and R until the menu screen appears.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  If you have no success with the above, try:

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• G580 - laptop won't start not

  I had purchased lenovo g580 core i3 a year ago. 2 days, after closing my laptop, when I tried to turn it on, screen appeared at the beginning, but not usual lenovo can't anything after that. It crashes without giving a answer... There is 2 option or press F2 for Setup and F12 for the boot menu. but nothing is happening, even when I press the buttons. someone help me please

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  I suspect that your HARD drive has a problem, generally, it's like that, it won't start if the HARD drive was fried on you, try a key recovery to restore as long as day 1. Otherwise, buy a slap of casing 2.5 drive your hard drive inside, save the files after reinstall windows 8 or make the one key recovery.

• Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

  Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

  Hello peoples,
  I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
  Help, please! I'm really desperate right now, and any help would be appreciated!
  Thanks in advance!

  PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

  PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

  EDIT: The error message went like this:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  Thanks for the billionth time!

  have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

• (Redirect) laptop screen turn green and setting turned off by its own

  Hell0... im using inspiron N4010... its been im 5 1/2 years using this laptop... all IM use sudenly screen turn green and its gt out of its own... thn I cudnt start 2 hours aftr a few hours its power on... and now it can be used as usual... I take abt serious prob of HRT? that due to the heat?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Desktop won't start no-of faulty power or motherboard?

  Compaq Presario SR5000/Windows 7 Ultimate 32 bit

  I had this problem for a few months - the Office doesn't turn back on when I unplug and plug it back and the green light of the power cord blinks. Based on the troubleshooting guide from HP for this flashing light, I was able to isolate the problem to the connector 24 pin main that feeds the motherboard. Whenever I got in this regard, the light was stable. Thus, the last two times I've been able to bring the office back to life by unplugging / plugging the 24 pin connector.

  This time, of the power supply does blink everything as long as the motherboard is powered but puts constant green when I get this connector.

  I tried the hairdryer mentioned here http://h30434.www3.hp.com/t5/Desktop-Hardware/Desktop-won-t-start-blinking-green-light/td-p/4467 but stuff that no longer works.

  As the POWER light turns off when I have the motherboard power and turns on when I win, I don't know which replace - block power SUPPLY or the motherboard but obviously one of them is the question.

  Power supply model #: Bestec ATX 250 12Z

  Thank you!

  Power supply failures are much more common than the failings of the motherboard... and less expensive to replace. I have a machine now sometimes, which flashes and takes a few coachig at startup if unplugged for awhile and anticipates a new power supply in the near future.

  If you check the specifications and dimensions, you can buy a replacement WHAT PSU to many points of sale, or online at places like Newegg.com or Tigerdirect.com pretty cheap.

  You could also first remove the power supply and take it to a place that makes the PC repairs and ask them to test it. I bought a tester of POWER a few years ago that saved many hours of troubleshooting.

• T43 won't start, it must remove the battery and try again.

  T43

  2686 E7U

  My computer frequently not turn on, I have to take to HQ and main and ultrabay batteries, sit around for a while and try again and again. It never fails to start the computer in the end, but I'm also afraid someday that simply, it won't start. Currently, I decided to not turn off my computer, I just pause and restart from time to time. Stability wise it is solid, but I would like to address this issue before the end of my warranty and I don't want to be without my computer for a long time. This has been a recurring problem for much of this year.

  I don't have a working windows partition, I run ubuntu, so I wouldn't have enough to mess with resettlement of the bios unless it can really solve my problem. Information about the current bios

  1.29 BIOS version (1YET65WW) 21/08/2006

  Embedded controller 1.06

  The typical sequence looks like this.

  Computer is turned off and unplugged after a normal shutdown.

  I plug in the power adapter to the computer, and after a few seconds the Green battery light.

  I press the power button, the computer does not put away and the light / energy from the battery stop.

  The light on the battery even when I release the power button remains off.

  Next step is to remove the AC and my two batteries, wait awhile, plug it back and and cross my fingers. If does not turn on, go to step 1 and repeat.

  I sent it to lenovo and they replaced the motherboard, and which until now has seemed to solve the problem.  even got a new keyboard out of it, even if the keyboard is a little more clicky then old.

  called Sunday, got a box Monday, droped out of the box of DHL Tuesday, got my computer back on Friday.  pretty good, considering that he was sent to tennessee.

• my iphone 6s erased and won't start

  My Iphone 6s erased and won't start

  Hello

  Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support